Remote I/O Modules

Robust Remote I/O Modules

Number of channels

Input

Output

Resolution

Sampling Rates

Communication Protocol

Counter Input

ADAM-4117

Robust 8-ch Analog Input Module with Modbus

• 8 differential and independent configuration channels
• Broader operating temperature range
• LED display allows to monitor the status address settings
• Higher noise immunity: 1 kV surge protection on power inputs, 3 kV EFT, and 8 kV ESD protection
• Broader power input range: 10 ~ 48VDC
• Supports 200 VDC high common mode voltage
• Supports unipolar and bipolar input
• Supports ± 15 V input range
• Supports filter auto-turning or filter-out 50 Hz / 60 Hz
• Online firmware update

Specifications

Display	LED Indicators	Status, Comm, and Ch. enable
Power Supply	Power Requirement	10~48 VDC
Analog Input	Channels	8 differential
	Voltage Range	0~150 mV 0~500 mV 0~1V 0~5 V 0~10 V ±150 mV ±500 mV ±1 V ±5 V ±10 V ±15 V
	Current Input	±20 mA 0~ 20 mA 4~20 mA
	Burn-out Detection	Yes (4~20 mA)
	Channel Independent Configuration	Yes
	Sampling Rates	10/100 samples/second (total)
	Resolution	16-bit
	Input Impedance	Voltage: 20 MOhm Current: 120 Ohm
	Span Drift	±25 ppm/°C
	Zero Drift	±6 µV/°C
	CMR @ 50/60 Hz	92 dB
	NMR @ 50/60 Hz	60 dB
	High Common Mode	200 VDC
General	Watchdog Timer	System (1.6 second) & Communication
	Connector	2 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	-40~85°C (40~185 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-40~85°C (40~185 °F)
	Interface	RS-485
	Isolation Protection	3000 VDC
	Communication Protocol	ASCII command & Modbus/RTU
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes

Downloads

Datasheets

ADAM-4117 Datasheet

8 differential
0~150 mV 0~500 mV 0~1V 0~5 V 0~10 V ±150 mV ±500 mV ±1 V ±5 V ±10 V ±15 V ±20 mA 0~ 20 mA 4~20 mA
Communication Protocol
16-bit
10/100 samples/second (total)
ASCII command & Modbus/RTU
N/A

Robust Remote I/O Modules

Number of channels

Input

Output

Resolution

Sampling Rates

Communication Protocol

Counter Input

ADAM-4118

Robust 8-ch Thermocouple Input Module with Modbus

• 8 differential & independent thermocouple configuration channels
• Broader Operating Temperature Range
• Higher Noise Immunity: 1 kV surge protection on power inputs, 3 kV EFT, and 8 kV ESD protection
• Broader Power Input Range: +10~+48 VDC
• Supports filter auto-tuning or filter out 50 Hz / 60 Hz
• LED display allows to monitor the status address settings
• Online Firmware Update

Specifications

Display	LED Indicators	Status, Comm, and Ch. enable
Power Supply	Power Requirement	10~48 VDC
Analog Input	Channels	8 differential
	Voltage Range	15 mV ±50 mV ±100 mV ±500 mV ±1 V ±2.5 V
	Current Input	±20 mA 4~20 mA
	Direct Sensor Input	J, K, T, E, R, S, B Thermocouple
	Burn-out Detection	Yes (4~20 mA & all T/C)
	Channel Independent Configuration	Yes
	Sampling Rates	10/100 samples/second (total)
	Resolution	16-bit
	Input Impedance	Voltage: 20 MOhm Current: 120 Ohm
	Span Drift	±25 ppm/°C
	Zero Drift	±6 µV/°C
	CMR @ 50/60 Hz	92 dB
	NMR @ 50/60 Hz	60 dB
	High Common Mode	200 VDC
General	Watchdog Timer	System (1.6 second) & Communication
	Connector	2 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	-40~85°C (40~185 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-40~85°C (40~185 °F)
	Interface	RS-485
	Isolation Protection	3000 VDC
	Communication Protocol	ASCII command & Modbus/RTU
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes

Downloads

Datasheets

ADAM-4118 Datasheet

8 differential
15 mV ±50 mV ±100 mV ±500 mV ±1 V ±2.5 V ±20 mA 4~20 mA J, K, T, E, R, S, B Thermocouple
Communication Protocol
16-bit
10/100 samples/second (total)
ASCII command & Modbus/RTU
N/A

Robust Remote I/O Modules

Number of channels

Input

Output

Resolution

Sampling Rates

Communication Protocol

Counter Input

ADAM-4150

Robust 15-ch Digital I/O Module with Modbus

• 7 input channels and 8 output channels
• Broader Operating Temperature Range
• Higher Noise Immunity: 1 kV surge protection on power inputs, 3 kV EFT, and 8 kV ESD protection
• Broader Power Input Range: +10 ~ +48 VDC
• LED display allows to monitor the status address settings
• Digital Filter Function
• DI channels can be used as 1 kVGz counters
• Over current/ short circuit protection
• DO channels support pulse output function

Specifications

Display	LED Indicators	Status, Comm, and DIO
Power Supply	Power Requirement	10~48 VDC
Digital I/O	Frequency Input	DI counters (32-bit + 1-bit overflow, 3kHz max.)
General	Watchdog Timer	System (1.6 second) & Communication
	Connector	2 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	-40~85°C (40~185 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-40~85°C (40~185 °F)
	Interface	RS-485
	Isolation Protection	3000 VDC
	Communication Protocol	ASCII command & Modbus/RTU
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes
Digital Input	Channles	7
Digital Input	Input Voltage	Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 3 VDC max. Logic level 1: 10~30 VDC
Digital Output	Channels	8 Open collector to 40V, 1 A max. load Support 1 kHz pulse output
Digital Output	Power Dissipation	1W load max

Downloads

Datasheets

ADAM-4150 Datasheet

7 DI, 8DO
Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 3 VDC max. Logic level 1: 10~30 VDC
8 Open collector to 40V, 1 A max. load Support 1 kHz pulse output
N/A
N/A
ASCII command & Modbus/RTU
DI counters (32-bit + 1-bit overflow, 3kHz max.)

Robust Remote I/O Modules

Number of channels

Input

Output

Resolution

Sampling Rates

Communication Protocol

Counter Input

ADAM-4168

Robust 8-ch Relay Output Module with Modbus

• 8 Form A output channels
• Broader Operating Temperature Range
• Higher Noise Immunity: 1 kV surge protection on power inputs, 3 kV EFT, and 8 kV ESD Protection
• Broader Power Input Range: +10 ~ +48 VDC
• LED display allows to monitor the status address settings
• DO channels support pulse output function

Specifications

Display	LED Indicators	Status, Comm, and Relay
Power Supply	Power Requirement	10~48 VDC
General	Watchdog Timer	System (1.6 second) & Communication
	Connector	2 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	-40~85°C (40~185 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-40~85°C (40~185 °F)
	Interface	RS-485
	Isolation Protection	3000 VDC
	Communication Protocol	ASCII command & Modbus/RTU
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes
Digital Output	Channels	8-ch relay Support 100 Hz

Downloads

Datasheets

ADAM-4168 Datasheet

8 DO
Communication Protocol N/A
8-ch relay Support 100 Hz pulse output
N/A
N/A
ASCII command & Modbus/RTU
N/A

Controller Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4500

PC-based Communication Controller

• Powerful communication controller in a small package
• Built-in Boot ROM DOS to run PC programs
• Free ROM/RAM memory for user's applications
• 2-wire, multi-drop RS-485 networking
• Communication speed up to 115.2 Kbps
• RS-232/RS-485 modes (jumper selectable)
• Automatic data fl ow control in RS-485 mode
• Built-in real-time clock and watchdog timer
• Easy mounting on a DIN-rail or panel
• Accepts unregulated power sources between 10 to 30 VDC
• Program download cable and utility included

Specifications

Power Supply	Power Requirement	10~30 VDC
General	Watchdog Timer	Yes
	Connector	RS-232: DB-9 1 x plug-in terminal block (I/O and power)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Interface	RS-232 RS-485
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control

Downloads

Datasheets

ADAM-4500 Datasheet

10~30 VDC
N/A
N/A
N.A
N/A
RS-232 RS-485
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Controller Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4501

Ethernet-enabled Communication Controller with 8-ch DI/O

• 10/100Base-T Ethernet Interface
• Email alarm function
• Built-in Web Server
• Built-in FTP Server and Client
• Supports functionally versatile I/O modules
• Full functions of standard TCP and UDP sockets
• Optional 4 digit 7-segment LED display
• Supports Modbus/RTU and Modbus/TCP function libraries
• 1.5 MB Flash ROM/640 KB SRAM
• Four serial ports available
• Integrated all operations in Windows utility

Specifications

Display	LED Indicators	Power, Run, Battery, Comm
Power Supply	Power Requirement	10~30 VDC
General	Watchdog Timer	Yes
	Connector	Ethernet: RJ-45 RS-485: plug-in screw terminal RS-232: RJ-48
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-232 RS-485 10/100Base-T(X)
	Isolation Protection	1,000 VDC
	Communication Protocol	Modbus/RTU, Modbus/TCP, TCP/IP, UDP, ICMP, ARP, DHCP
	Communication Speed	Serial: From 1,200 to 115.2 Ethernet: 10/100Mbps
	Comm. Distance	Serial: 1.2 km Ethernet: 100 m
	Data Flow Control	Yes
	Built-in I/O	4DI/4DO
Digital Input	Channles	4
Digital Input	Input Voltage	Dry contact: Logic level 1: close to GND Logic level 0: open Wet contact: Logic level 1: 2 VDC max. Logic level 0: 4~30 VDC
Digital Output	Channels	4 Open collector to 40V, 2

Downloads

Datasheets

ADAM-4501 Datasheet

10~30 VDC
4 Dry contact: Logic level 1: close to GND Logic level 0: open Wet contact: Logic level 1: 2 VDC max. Logic level 0: 4~30 VDC
4 Open collector to 40V, 200 mA max. load
N.A
N/A
Modbus/RTU, Modbus/TCP, TCP/IP, UDP, ICMP, ARP, DHCP
Serial: From 1,200 to 115.2 Ethernet: 10/100Mbps
Serial: 1.2 km Ethernet: 100 m
N/A

Controller Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4502

Ethernet-enabled Communication Controller with 2-ch AI/O and 4-ch DI/O

• 10/100Base-T(X) Ethernet interface
• Email alarm function
• Built-in web server
• Built-in FTP server and client
• Supports functionally versatile I/O modules
• Full functions of standard TCP and UDP sockets
• Supports Modbus/RTU and Modbus/TCP function libraries
• 1.5 MB Flash ROM/640 KB SRAM
• 4 serial ports
• Integrated all operations in Windows utility

Specifications

Display	LED Indicators	Power, Run, Battery, Comm
Power Supply	Power Requirement	10~30 VDC
Analog Input	Channels	1
	Voltage Range	±150 mV ±500 mV ±1 V ±2.5 V ±5 V ±10 V
	Current Input	±20 mA
	Sampling Rates	10 samples/second
	Resolution	16-bit
Analog Output	Channels	1
	Voltage Range	0~10 V
	Current Output	0~20 mA
General	Watchdog Timer	Yes
	Connector	Ethernet: RJ-45 RS-485: plug-in screw terminal RS-232: RJ-48
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-232 RS-485 10/100Base-T(X)
	Isolation Protection	1,000 VDC
	Communication Protocol	Modbus/RTU, Modbus/TCP, TCP/IP, UDP, ICMP, ARP, DHCP
	Communication Speed	Serial: From 1,200 to 115.2 Ethernet: 10/100Mbps
	Comm. Distance	Serial: 1.2 km Ethernet: 100 m
	Data Flow Control	Yes
	Built-in I/O	1AI/1AO/2DI/2DO
Digital Input	Channles	2
Digital Input	Input Voltage	Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 2 VDC max. Logic level 1: 4~30 VDC
Digital Output	Channels	2 Open collector to 40V, 200 mA m

Downloads

Datasheets

ADAM-4502 Datasheet

10~30 VDC
2 Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 2 VDC max. Logic level 1: 4~30 VDC
2 Open collector to 40V, 200 mA max. load
1 Channel: ±150 mV ±500 mV ±1 V ±2.5 V ±5 V ±10 V ±20 mA
1 Channel: 0~10 V 0~20 mA
Modbus/RTU, Modbus/TCP, TCP/IP, UDP, ICMP, ARP, DHCP
Serial: From 1,200 to 115.2 Ethernet: 10/100Mbps
Serial: 1.2 km Ethernet: 100 m
N/A

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4011

1-ch Thermocouple Input Module

• Input type: Thermocouple, mV, V or mA
• Isolation voltage: 3000 VDC
• Watchdog Timer

Specifications

Analog input modules use a microprocessor-controlled integrating A/D converter to convert sensor voltage, current, thermocouple, or RTD signals into digital data. The digital data is then translated into either engineering units, twos complement hexadecimal format or percentage of full-scale range (FSR)according to the module ’s configuration. When prompted by the host computer, the data is sent through a standard RS-485 interface. The Analog Input Modules offer signal conditioning, A/D conversion, ranging, and RS-485 digital communication functions. They protect your equipment from ground loops and power surges by providing opto-isolation of the A/D input and transformer based isolation up to 3000 V DC . (ADAM-4011 has transformer-based isolation up to 500 V DC )

Downloads

Datasheets

ADAM-4011 Datasheet

10~30 VDC
N/A
2, open collector to 30 V, 30 mA max. load
±15 mV, ±50 mV, ±100 mV,±500 mV, ±1 V,±2.5 V, ±20 mA J,R,K,S,T,B,E
N/A
16-bit
10 samples/second
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4012

1-ch Thermocouple Input Module

• Input type: Input type: mV, V or mA

Specifications

Display	LED Indicators	Power
Power Supply	Power Requirement	10~30 VDC
Analog Input	Channels	1 differential
	Voltage Range	±150 mV ±500 mV ±1 V ±5 V ±10 V
	Current Input	±20 mA
	Sampling Rates	10 samples/second
	Resolution	16-bit
	Input Impedance	Voltage: 20 MOhm Current: 125 Ohm
	Span Drift	±25 ppm/°C
	Zero Drift	±6 µV/°C
	CMR @ 50/60 Hz	150 dB
	NMR @ 50/60 Hz	100 dB
General	Watchdog Timer	System (1.6 second)
	Connector	1 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	3000 VDC
	Communication Protocol	ASCII command
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes
Digital Input	Channles	1
Digital Input	Input Voltage	Logic level 0: 1 V max. Logic level 1: 3.5~30 V
Digital Output	Channels	2 Open collector to 30V, 30 mA max. load
Digital Output	Power Dissipation	300 mW

Downloads

Datasheets

ADAM-4012 Datasheet

10~30 VDC
1 Logic level 0: 1 V max. Logic level 1: 3.5~30 V
2 Open collector to 30V, 30 mA max. load
1 differential ±150 mV ±500 mV ±1 V ±5 V ±10 V ±20 mA
N/A
16-bit
10 samples/second
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4013

1-ch RTD Input Module

• Built-in Watchdog Timer
• Isolation Voltage 3000 VDC
• Sampling Rate 10 sample/sec
• Accuracy +/- 0.1% or better

Specifications

Display	LED Indicators	Power
Power Supply	Power Requirement	10~30 VDC
Analog Input	Channels	1 (2, 3, or 4-wired)
	Direct Sensor Input	RTD (Pt, or Ni)
	Sampling Rates	10 samples/second
	Resolution	16-bit
	Input Impedance	2 MOhm
	Span Drift	±25 ppm/°C
	Zero Drift	±3 µV/°C
	CMR @ 50/60 Hz	150 dB
	NMR @ 50/60 Hz	100 dB
General	Watchdog Timer	System (1.6 second)
	Connector	1 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	3000 VDC
	Communication Protocol	ASCII command
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes

Downloads

Datasheets

ADAM-4013 Datasheet

10~30 VDC
N/A
N/A
1 (2, 3, or 4-wired) RTD (Pt, or Ni)
N/A
16-bit
10 samples/second
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4015

6-ch RTD Module with Modbus

• 6-channel 2 or 3 wires RTD Input
• Accept Pt100/1000, Balco500, Ni input signals
• Channels configurable for different types of input individually
• Wiring burned-out detectable function
• 3000 VDC A/D to logic isolation

Specifications

Display	LED Indicators	Power
Power Supply	Power Requirement	10~30 VDC
Analog Input	Channels	6 (2 or 3-wired)
	Direct Sensor Input	RTD (Pt, Balco, or Ni)
	Burn-out Detection	Yes
	Sampling Rates	10 samples/second
	Resolution	16-bit
	Input Impedance	10 MOhm
	Span Drift	±25 ppm/°C
	Zero Drift	±3 µV/°C
	CMR @ 50/60 Hz	120 dB
	NMR @ 50/60 Hz	100 dB
General	Watchdog Timer	System (1.6 second) & Communication
	Connector	2 x plug-in terminal block (#14~28 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	3000 VDC
	Communication Protocol	ASCII command & Modbus/RTU
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes

Downloads

Datasheets

ADAM-4015 Datasheet

10~30 VDC
N/A
N/A
6 (2 or 3-wired) RTD (Pt, Balco, or Ni)
N/A
16-bit
10 samples/second
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4015T

6-ch Thermistor Module with Modbus

• Built-in Watchdog timer
• Individual Wire burned-out detection
• Effective Resolution: 16-bit
• Isolation Voltage: 3000Vdc
• Sampling Rate: 10 samples/sec.
• Input Connections: 2 or 3 wires

Specifications

Display	LED Indicators	Power
Power Supply	Power Requirement	10~30 VDC
Analog Input	Channels	6 (2 or 3-wired)
	Direct Sensor Input	Thermistor 3k, 10k
	Burn-out Detection	Yes
	Channel Independent Configuration	Yes
	Sampling Rates	10 samples/second
	Resolution	16-bit
	Input Impedance	10 MOhm
	Span Drift	±25 ppm/°C
	Zero Drift	±3 µV/°C
	CMR @ 50/60 Hz	120 dB
	NMR @ 50/60 Hz	100 dB
General	Watchdog Timer	System (1.6 second) & Communication
	Connector	2 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	3000 VDC
	Communication Protocol	ASCII command & Modbus/RTU
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes

Downloads

Datasheets

ADAM-4015T Datasheet

10~30 VDC
N/A
N/A
6 (2 or 3-wired) Thermistor 3k, 10k
N/A
16-bit
10 samples/second
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4016

6-ch Thermistor Module with Modbus

• Strain Gauge Input
• Watchdog Timer

Specifications

Display	LED Indicators	Power
Power Supply	Power Requirement	10~30 VDC
Analog Input	Channels	1 differential
	Voltage Range	±15 mV ±50 mV ±100 mV ±500 mV
	Current Input	±20 mA
	Sampling Rates	10 samples/second
	Resolution	16-bit
	Input Impedance	Voltage: 2 MOhm Current: 125 Ohm
	Span Drift	±25 ppm/°C
	Zero Drift	±6 µV/°C
	CMR @ 50/60 Hz	92 dB
Analog Output	Channels	1
Analog Output	Voltage Range	0~10 V (30 mA max.)
General	Watchdog Timer	System (1.6 second)
	Connector	2 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	3000 VDC
	Communication Protocol	ASCII command
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes
Digital Output	Channels	4 Open collector to 30V, 30 mA max. load
Digital Output	Power Dissipation	300 mW

Downloads

Datasheets

ADAM-4016 Datasheet

10~30 VDC
N/A
4 Open collector to 30V, 30 mA max. load
1 differential ±15 mV ±50 mV ±100 mV ±500 mV ±20 mA
1 0~10 V (30 mA max.)
16-bit
10 samples/second
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4017

8-ch Analog Input Module

• Channels: Six differential, two single-ended
• Input type: mV, V, mA
• Sampling rate: 10 samples/sec. (total)

Specifications

Display	LED Indicators	Power
Power Supply	Power Requirement	10~30 VDC
Analog Input	Channels	8 differential
	Voltage Range	±150 mV ±500 mV ±1 V ±5 V ±10 V
	Current Input	±20 mA
	Sampling Rates	10 samples/second
	Resolution	16-bit
	Input Impedance	Voltage: 20 MOhm
	Span Drift	±25 ppm/°C
	Zero Drift	±6 µV/°C
	CMR @ 50/60 Hz	92 dB
General	Watchdog Timer	Yes
	Connector	2 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	3000 VDC
	Communication Protocol	ASCII command
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes

Downloads

Datasheets

ADAM-4017 Datasheet

10~30 VDC
N/A
N/A
8 differential ±150 mV ±500 mV ±1 V ±5 V ±10 V ±20 mA
N/A
16-bit
10 samples/second
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4017+

8-ch Analog Input Module with Modbus

• 16-bit resolution
• Eight different inputs
• Software configurable for mV, V or mA inputs
• 3000 Vdc isolation
• Supports Modbus/RTU Protocol
• Supports 4~20mA

Specifications

Display	LED Indicators	Power
Power Supply	Power Requirement	10~30 VDC
Analog Input	Channels	8 differential
	Voltage Range	±150 mV ±500 mV ±1 V ±5 V ±10 V
	Current Input	±20 mA, 4~20mA
	Channel Independent Configuration	Yes
	Sampling Rates	10 samples/second
	Resolution	16-bit
	Input Impedance	Voltage: 20 MOhm Current: 120 Ohm
	Span Drift	±25 ppm/°C
	Zero Drift	±6 µV/°C
	CMR @ 50/60 Hz	120 dB
	NMR @ 50/60 Hz	100 dB
General	Watchdog Timer	System (1.6 second) & Communication
	Connector	2 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	3000 VDC
	Communication Protocol	ASCII command & Modbus/RTU
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes

Downloads

Datasheets

ADAM-4017+ Datasheet

10~30 VDC
N/A
N/A
8 differential ±150 mV ±500 mV ±1 V ±5 V ±10 V ±20 mA, 4~20mA
N/A
16-bit
10 samples/second
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4018

8-ch Analog Input Module with Modbus

• Channels: Six differential, two single-ended
• Input type: Thermocouple, mV, V, mA
• Fault and overvoltage protection
• Watchdog Timer

Specifications

Display	LED Indicators	Power
Power Supply	Power Requirement	10~30 VDC
Analog Input	Channels	8 differential
	Voltage Range	±15 mV ±50 mV ±100 mV ±500 mV ±1 mV ±2.5 mV
	Current Input	±20 mA
	Direct Sensor Input	J, K, T, E, R, S, B Thermocouple
	Sampling Rates	10 samples/second
	Resolution	16-bit
	Input Impedance	Voltage: 20 MOhm
	Span Drift	±25 ppm/°C
	Zero Drift	±3 µV/°C
	CMR @ 50/60 Hz	92 dB
General	Watchdog Timer	Yes
	Connector	2 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	3000 VDC
	Communication Protocol	ASCII command
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes

Downloads

Datasheets

ADAM-4018 Datasheet

10~30 VDC
N/A
N/A
8 differential ±15 mV ±50 mV ±100 mV ±500 mV ±1 mV ±2.5 mV ±20 mA J, K, T, E, R, S, B Thermocouple
N/A
16-bit
10 samples/second
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4018+

8-ch Thermocouple Input Module with Modbus

• 16-bit resolution
• Eight different inputs
• Software configurable for T/C, low level voltage or mA inputs
• Wiring burned-out detectable function
• 3000 Vdc isolation
• Supports Modbus/RTU Protocol
• Supports 4~20mA

Specifications

Display	LED Indicators	Power
Power Supply	Power Requirement	10~30 VDC
Analog Input	Channels	8 differential
	Current Input	±20 mA, 4~20mA
	Direct Sensor Input	J, K, T, E, R, S, B Thermocouple
	Burn-out Detection	Yes (All T/C)
	Channel Independent Configuration	Yes
	Sampling Rates	10 samples/second
	Resolution	16-bit
	Input Impedance	Thermocouple: 20 MOhm Current: 120 Ohm
	Span Drift	±25 ppm/°C
	Zero Drift	±6 µV/°C
General	Watchdog Timer	System (1.6 second) & Communication
	Connector	2 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	3000 VDC
	Communication Protocol	ASCII command & Modbus/RTU
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes

Downloads

Datasheets

ADAM-4018+ Datasheet

10~30 VDC
N/A
N/A
8 differential ±15 mV ±50 mV ±100 mV ±500 mV ±1 mV ±2.5 mV ±20 mA J, K, T, E, R, S, B Thermocouple
N/A
16-bit
10 samples/second
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4019+

8-ch Universal Analog Input Module with Modbus

• Supports 4~20 mA
• Software configurable for mV, V, mA or Thermocouple inputs
• 16-bit resolution
• Isolation voltage 3000 VDC
• Supports Modbus/RTU Protocol
• Burn-out detection function

Specifications

Display	LED Indicators	Power
Power Supply	Power Requirement	10~30 VDC
Analog Input	Channels	8 differential
	Voltage Range	±100 mV ±500 mV ±1 V ±2.5 V ±5 V ±10 V
	Current Input	±20 mA, 4~20mA
	Direct Sensor Input	J, K, T, E, R, S, B Thermocouple
	Burn-out Detection	Yes (4~20 mA & all T/C)
	Channel Independent Configuration	Yes
	Sampling Rates	10 samples/second
	Resolution	16-bit
	Input Impedance	Voltage: 20 MOhm Current: 120 Ohm
	Span Drift	±25 ppm/°C
	Zero Drift	±6 µV/°C
	CMR @ 50/60 Hz	120 dB
	NMR @ 50/60 Hz	100 dB
General	Watchdog Timer	System (1.6 second) & Communication
	Connector	2 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	3000 VDC
	Communication Protocol	ASCII command & Modbus/RTU
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes

Downloads

Datasheets

ADAM-4019+ Datasheet

10~30 VDC
N/A
N/A
8 differential ±15 mV ±50 mV ±100 mV ±500 mV ±1 mV ±2.5 mV ±20 mA J, K, T, E, R, S, B Thermocouple
N/A
16-bit
10 samples/second
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4021

1-ch Analog Output Module

• Output type: mA, V
• Output range: 0 ~ 20 mA, 4 ~ 20 mA, 0 ~ 10 V
• Isolation voltage: 3000 V DC

Specifications

Display	LED Indicators	Power
Power Supply	Power Requirement	10~30 VDC
Analog Output	Channels	1
	Voltage Range	0~10 V
	Current Output	0~20 mA, 4~20mA
General	Watchdog Timer	System (1.6 second)
	Connector	1 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	3000 VDC
	Communication Protocol	ASCII command
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes

Downloads

Datasheets

ADAM-4021 Datasheet

10~30 VDC
N/A
N/A
N/A
1 0~10 V 0~20 mA, 4~20mA
12-bit
N/A
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4022T

2-ch Serial Based Dual Loop PID Controller with Modbus

• Channels: 4
• Input Type: mA, V, Thermistor, RTD
• Input Range: 0 to 20 mA, 4 to 20 mA, 0 to 10 V
• Watchdog Timer

Specifications

Display	LED Indicators	Power
Power Supply	Power Requirement	10~30 VDC
Analog Input	Channels	4 differential
	Voltage Range	0~10 V
	Current Input	0~20 mA, 4~20mA
	Direct Sensor Input	Thermistor 3k, 10k RTD (Pt100, 1000)
	Burn-out Detection	Yes
	Channel Independent Configuration	Yes
	Sampling Rates	10 samples/second (total)
	Resolution	16-bit
	CMR @ 50/60 Hz	92 dB
Analog Output	Channels	2
	Voltage Range	0~10 V
	Current Output	0~20 mA, 4~20mA
General	Watchdog Timer	System (1.6 second)
	Connector	2 x plug-in terminal block (#14~28 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	3000 VDC
	Communication Protocol	ASCII command & Modbus/RTU
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes
Digital Input	Channles	2
Digital Input	Input Voltage	Logic level 0: close to GND Logic level 1: open
Digital Output	Channels	2 Open collector to 30V, 30 mA max. load
Digital Output	Power Dissipation	300 m

Downloads

Datasheets

ADAM-4022T Datasheet

10~30 VDC
2 Logic level 0: close to GND Logic level 1: open
2 Open collector to 30V, 30 mA max. load
4 differential 0~10 V 0~20 mA, 4~20mA Thermistor 3k, 10k RTD (Pt100, 1000)
2 0~10 V 0~20 mA, 4~20mA
12-bit
10 samples/second (total)
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4024

4-ch Analog Output Module with Modbus

• 12-bit resolution
• Software configurable for mA or V output in individual channels
• 4 digital inputs for latch output
• 3000 VDC D/A to Logic isolation
• Programmable output slope: 0.125 - 128.0 mA/sec. 0.0625 - 64 V/sec.

Specifications

Display	LED Indicators	Power
Power Supply	Power Requirement	10~30 VDC
Analog Output	Channels	4
	Voltage Range	±10 V
	Current Output	0~20 mA, 4~20mA
General	Watchdog Timer	System (1.6 second) & Communication
	Connector	2 x plug-in terminal block (#14~28 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	3000 VDC
	Communication Protocol	ASCII command & Modbus/RTU
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes
Digital Input	Channles	4
Digital Input	Input Voltage	Logic level

Downloads

Datasheets

ADAM-4024T Datasheet

10~30 VDC
4 Logic level 0: 1 VDC max. Logic level 1: 10~30 VDC
N/A
N/A
4 0~10 V 0~20 mA, 4~20mA
12-bit
N/A
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Digital I/O Modules

Power Supply

Digital Input

Digital Output

Data Flow Control

Connector

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4050

15-ch Digital I/O Module

• 7 input channels, 8 output channels
• Watchdog Timer

Specifications

Display	LED Indicators	Power
Power Supply	Power Requirement	10~30 VDC
General	Watchdog Timer	System (1.6 second)
	Connector	2 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Communication Protocol	ASCII command
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes
Digital Input	Channles	7
Digital Input	Input Voltage	Logic level 0: 1 VDC max. Logic level 1: 3.5~30 VDC
Digital Output	Channels	8 Open collector to 30V, 30 mA max. load
Digital Output	Power Dissipation	300 mW

Downloads

Datasheets

ADAM-4050 Datasheet

10~30 VDC
7 Logic level 0: 1 VDC max. Logic level 1: 3.5~30 VDC
8 Open collector to 30V, 30 mA max. load
Yes
2 x plug-in terminal block (#14~22 AWG)
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Digital I/O Modules

Power Supply

Digital Input

Digital Output

Data Flow Control

Connector

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4051

16-ch Isolated Digital Input Module with Modbus

• 16 digital input channels
• Digital input for dry contact or wet contact
• Input Voltage level: 10~50V
• Over voltage protection: 70 Vdc
• 2,500 Vdc optical isolation

Specifications

Display	LED Indicators	Power, DI
Power Supply	Power Requirement	10~30 VDC
General	Watchdog Timer	System (1.6 second)
	Connector	2 x plug-in terminal block (#14~28 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	2,500 VDC
	Communication Protocol	ASCII command & Modbus/RTU
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes
Digital Input	Channles	16
Digital Input	Input Voltage	Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 3 VDC max. Logic level 1: 10~50 VDC

Downloads

Datasheets

ADAM-4051 Datasheet

10~30 VDC
16 Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 3 VDC max. Logic level 1: 10~50 VDC
N/A
Yes
2 x plug-in terminal block (#14~22 AWG)
ASCII command & Modbus/RTU
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Digital I/O Modules

Power Supply

Digital Input

Digital Output

Data Flow Control

Connector

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4052

8-ch Isolated Digital Input Module

• Six fully independent isolated channels
• Two isolated channels with common ground
• Isolation voltage: 5000 V RMS

Specifications

Display	LED Indicators	Power
Power Supply	Power Requirement	10~30 VDC
General	Watchdog Timer	System (1.6 second)
	Connector	2 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	5,000 VRMS
	Communication Protocol	ASCII command
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes
Digital Input	Channles	8
Digital Input	Input Voltage	Logic level 0: 1 VDC max. Logic level 1: 3~30 VDC

Downloads

Datasheets

ADAM-4052 Datasheet

10~30 VDC
8 Logic level 0: 1 VDC max. Logic level 1: 3~30 VDC
N/A
Yes
2 x plug-in terminal block (#14~22 AWG)
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Digital I/O Modules

Power Supply

Digital Input

Digital Output

Data Flow Control

Connector

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4053

16-ch Digital Input Module

• 16 input channels
• Watchdog Timer

Specifications

Display	LED Indicators	Power
Power Supply	Power Requirement	10~30 VDC
General	Watchdog Timer	System (1.6 second)
	Connector	2 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Communication Protocol	ASCII command
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes
Digital Input	Channles	16
Digital Input	Input Voltage	Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 2 VDC max. Logic level 1: 4~30 VDC

Downloads

Datasheets

ADAM-4053 Datasheet

10~30 VDC
16 Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 2 VDC max. Logic level 1: 4~30 VDC
N/A
Yes
2 x plug-in terminal block (#14~22 AWG)
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Digital I/O Modules

Power Supply

Digital Input

Digital Output

Data Flow Control

Connector

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4055

16-ch Isolated Digital I/O Module with Modbus

• I/O type: 8 DO/DI
• Input Voltage level: 10~50 VDC
• Open Collector to 40 VDC
• Over voltage protection: 70 VDC
• 2,500 VDC optical isolation

Specifications

Display	LED Indicators	Power, DIO
Power Supply	Power Requirement	10~30 VDC
General	Watchdog Timer	System (1.6 second) & Communication
	Connector	2 x plug-in terminal block (#14~28 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	2,500 VDC
	Communication Protocol	ASCII command & Modbus/RTU
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes
Digital Input	Channles	8
Digital Output	Channels	8 Open collector to 40V, 200 mA max. load
Digital Output	Power Dissipation	Chanel: 1 W max Total: 2.2 W (8 Channels)

Downloads

Datasheets

ADAM-4055 Datasheet

10~30 VDC
16
8 Open collector to 40V, 200 mA max. load Chanel: 1 W max Total: 2.2 W (8 Channels)
Yes
2 x plug-in terminal block (#14~28 AWG)
ASCII command & Modbus/RTU
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Digital I/O Modules

Power Supply

Digital Input

Digital Output

Data Flow Control

Connector

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4056S

12-ch Sink Type Isolated Digital Output Module with Modbus

• Sink Type: Digital Output
• Digital Output: Open collector to 40V (200 mA max. load)
• 12 Channels
• I/O Type: Sink Type Output

Specifications

Display	LED Indicators	Power, DO
Power Supply	Power Requirement	10~30 VDC
General	Watchdog Timer	System (1.6 second) & Communication
	Connector	2 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	5,000 VDC
	Communication Protocol	ASCII command & Modbus/RTU
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes
Digital Output	Channels	12 (Sink type) Open collector to 40V, 200 mA max. load
Digital Output	Power Dissipation	Chanel: 1 W max Total: 2.2 W (8 Channels)

Downloads

Datasheets

ADAM-4056S Datasheet

10~30 VDC
N/A
12 (Sink type) Open collector to 40V, 200 mA max. load Chanel: 1 W max Total: 2.2 W (8 Channels)
Yes
2 x plug-in terminal block (#14~22 AWG)
ASCII command & Modbus/RTU
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Digital I/O Modules

Power Supply

Digital Input

Digital Output

Data Flow Control

Connector

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4056SO

12-ch Source Type Isolated Digital Output Module with Modbus

• DO Source Power Failure Detection
• I/O Type: Source Type Output
• 12 Channels
• Digital Output: VCC: 1-~35 Vdc, Current: 1A (per ch.)
• Over Current Detection

Specifications

Display	LED Indicators	Power, DO
Power Supply	Power Requirement	10~30 VDC
General	Watchdog Timer	System (1.6 second) & Communication
	Connector	2 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	5,000 VDC
	Communication Protocol	ASCII command & Modbus/RTU
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes
Digital Output	Channels	12 (Source type) VCC: 10~35 VDC, Current: 1 A (per channel) Over current detection and protection

Downloads

Datasheets

ADAM-4056SO Datasheet

10~30 VDC
N/A
12 (Source type) VCC: 10~35 VDC, Current: 1 A (per channel) Over current detection and protection
Yes
2 x plug-in terminal block (#14~22 AWG)
ASCII command & Modbus/RTU
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Digital I/O Modules

Power Supply

Digital Input

Digital Output

Data Flow Control

Connector

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4060

4-ch Relay Output Module

• 4-channels relay, two Form A and two Form C
• Breakdown voltage: 500 VAC (50/60 Hz)
• Insulation resistance: 1000 M ohms minimum at 500 V DC

Specifications

Display	LED Indicators	Power
Power Supply	Power Requirement	10~30 VDC
General	Watchdog Timer	System (1.6 second)
	Connector	2 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	Breakdown voltage: 500 VAC (50/60 Hz)
	Communication Protocol	ASCII command
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes
Digital Output	Channels	4-ch relay

Downloads

Datasheets

ADAM-4060 Datasheet

10~30 VDC
N/A
4-ch relay
Yes
2 x plug-in terminal block (#14~22 AWG)
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Digital I/O Modules

Power Supply

Digital Input

Digital Output

Data Flow Control

Connector

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4068

8-ch Relay Output Module with Modbus

• I/O type: 8 channels from C (NO/NC selectable)
• Contact rating: AC: 125 V @ 0.6 A; 250 V @ 0.3 A, DC: 30 V @ 2 A; 110 V @ 0.6 A
• Switch Time: Relay on time (typical): 3 msec, relay off time (typical): 1 msec.
• LED Indicators
• Supports Modbus/RTU protocol

Specifications

Display	LED Indicators	Power, Relay
Power Supply	Power Requirement	10~30 VDC
General	Watchdog Timer	System (1.6 second) & Communication
	Connector	2 x plug-in terminal block (#14~28 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	Breakdown voltage: 500 VAC (50/60 Hz)
	Communication Protocol	ASCII command & Modbus/RTU
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes
Digital Output	Channels	8-ch relay

Downloads

Datasheets

ADAM-4068 Datasheet

10~30 VDC
N/A
8-ch relay
Yes
2 x plug-in terminal block (#14~28 AWG)
ASCII command & Modbus/RTU
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Digital I/O Modules

Power Supply

Digital Input

Digital Output

Data Flow Control

Connector

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4069

8-ch Power Relay Output Module with Modbus

• High Power Relay Output : 240Vac@5A, 30Vdc@5A
• 8-channel Relay Output
• 4 form A channels and 4 form C channels
• Supports Modbus/RTU protocol and ADAM ASCII commands

Specifications

Display	LED Indicators	Power
Power Supply	Power Requirement	10~30 VDC
General	Watchdog Timer	System (1.6 second) & Communication
	Connector	2 x plug-in terminal block (#14~28 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	Breakdown voltage: 1000 VAC (50/60 Hz)
	Communication Protocol	ASCII command & Modbus/RTU
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes
Digital Output	Channels	8-ch power relay

Downloads

Datasheets

ADAM-4069 Datasheet

10~30 VDC
N/A
8-ch power relay
Yes
2 x plug-in terminal block (#14~28 AWG)
ASCII command & Modbus/RTU
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-6015

7-ch Isolated RTD Input Modbus TCP Module

• I/O Type: 7 RTD
• 10/100Based-T Ethernet
• Supports multi-channel/multi-range
• Pt 100/1000, Ni, Balco 500
• Wiring burn-out detect function

Specifications

Display	LED Indicators	Status, Comm, Link, Speed
Power Supply	Power Requirement	10~30 VDC
Analog Input	Channels	7 (2 or 3-wired)
	Direct Sensor Input	RTD (Pt, Balco, or Ni)
	Burn-out Detection	Yes
	Channel Independent Configuration	Yes
	Sampling Rates	10 samples/second
	Resolution	16-bit
	Input Impedance	>10 MOhm
	Span Drift	±25 ppm/°C
	Zero Drift	±6 µV/°C
	CMR @ 50/60 Hz	90 dB
	NMR @ 50/60 Hz	60 dB
General	Watchdog Timer	System (1.6 second) & Communication (programmable)
	Connector	1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	20~95 %RH
	Temperature (Storage)	-20~80 °C (-4~176 °F)
	Interface	10/100Base-T(X)
	Peer-to-Peer	Yes
	GCL	Yes
	Isolation Protection	2000 VDC
	Communication Protocol	Modbus/TCP, TCP/IP, UDP, and HTTP
	Communication Speed	Ethernet: 10/100Mbps
	Comm. Distance	Ethernet: 100 m

Downloads

Datasheets

ADAM-6015 Datasheet

10~30 VDC
N/A
N/A
7 (2 or 3-wired)
N/A
16-bit
10 samples/second
Modbus/TCP, TCP/IP, UDP, and HTTP
Ethernet: 10/100Mbps
Ethernet: 100 m
N/A

Digital I/O Modules

Power Supply

Digital Input

Digital Output

Data Flow Control

Connector

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4080

2-ch Counter/Frequency Module

• 2 digital outputs or high/low alarms
• 8-channel Relay Output2 independent 32-bit counters
• 2500 VRMS isolation
• Counter preset selection

Specifications

Display	LED Indicators	Power
Power Supply	Power Requirement	10~30 VDC
Digital I/O	Frequency Input	2 independent counters (32-bit + 1-bit overflow, 5~50kHz)
General	Watchdog Timer	System (1.6 second)
	Connector	2 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	2,500 VRMS
	Communication Protocol	ASCII command
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes
Digital Output	Channels	2 Open collector to 30V, 30 mA max. load
Digital Output	Power Dissipation	300 mW for each channel

Downloads

Datasheets

ADAM-4080 Datasheet

10~30 VDC
N/A
2 Open collector to 30V, 30 mA max. load 300 mW for each channel
Yes
2 x plug-in terminal block (#14~22 AWG)
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
2 independent counters (32-bit + 1-bit overflow, 5~50kHz)

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-6018

8-ch Isolated Thermocouple Input Modbus TCP Module with 8-ch DO

• I/O Type: 8 T/C & 8 DO
• 10/100Based-T Ethernet
• Supports multi-channel/multi-range
• Provides default/customized web page
• 2,500 VDC optical isolation

Specifications

Display	LED Indicators	Status, Comm, Link, Speed
Power Supply	Power Requirement	10~30 VDC
Analog Input	Channels	8 differential
	Direct Sensor Input	J, K, T, E, R, S, B Thermocouple
	Burn-out Detection	Yes
	Channel Independent Configuration	Yes
	Sampling Rates	10 samples/second
	Resolution	16-bit
	Input Impedance	>10 MOhm
	Span Drift	±25 ppm/°C
	Zero Drift	±6 µV/°C
	CMR @ 50/60 Hz	90 dB
	NMR @ 50/60 Hz	60 dB
General	Watchdog Timer	System (1.6 second) & Communication (programmable)
	Connector	1 x RJ-45 (LAN) & 1 x plug-in terminal block (DO and power) & 1 x 20-pin connector to daughterboard (TC)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	20~95 %RH
	Temperature (Storage)	-20~80 °C (-4~176 °F)
	Interface	10/100Base-T(X)
	Peer-to-Peer	Yes
	GCL	Yes
	Isolation Protection	2000 VDC
	Communication Protocol	Modbus/TCP, TCP/IP, UDP, and HTTP
	Communication Speed	Ethernet: 10/100Mbps
	Comm. Distance	Ethernet: 100 m
Digital Output	Channels	8 Open collector to 30V, 100 mA max. load
Digital Output	Power Dissipation	300 mW for each module

Downloads

Datasheets

ADAM-6018 Datasheet

10~30 VDC
N/A
8 Open collector to 30V, 100 mA max. load 300 mW for each module
8 differential
N/A
16-bit
10 samples/second
Modbus/TCP, TCP/IP, UDP, and HTTP
Ethernet: 10/100Mbps
Ethernet: 100 m
N/A

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-6024

12-ch Isolated Universal Input/Output Modbus TCP Module

• 6 differential channels
• 16-bit effective resolution
• Isolation Voltage: 2,000 VDC
• Provides default/customized web pageSampling Rate: 10 samples/sec

Specifications

Display	LED Indicators	Status, Comm, Link, Speed
Power Supply	Power Requirement	10~30 VDC
Analog Input	Channels	6 differential
	Voltage Range	±10 V
	Current Input	0~20 mA 4~20 mA
	Channel Independent Configuration	Yes
	Sampling Rates	10 samples/second
	Resolution	16-bit
	Input Impedance	20 MOhm
	Span Drift	±25 ppm/°C
	Zero Drift	±6 µV/°C
	CMR @ 50/60 Hz	90 dB
	NMR @ 50/60 Hz	60 dB
Analog Output	Channels	2
	Voltage Range	0~10 V
	Current Output	0~20 mA 4~20 mA
General	Watchdog Timer	System (1.6 second) & Communication (programmable)
	Connector	1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	20~95 %RH
	Temperature (Storage)	-20~80 °C (-4~176 °F)
	Interface	10/100Base-T(X)
	Peer-to-Peer	Receiver Only
	GCL	Receiver Only
	Isolation Protection	2000 VDC
	Communication Protocol	Modbus/TCP, TCP/IP, UDP, and HTTP
	Communication Speed	Ethernet: 10/100Mbps
	Comm. Distance	Ethernet: 100 m
Digital Input	Channels	2
Digital Input	Input Voltage	Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
Digital Output	Channels	2 Open collector to 30V, 100 mA max. load
Digital Output	Power Dissipation	300 mW for each module

Downloads

Datasheets

ADAM-6024 Datasheet

10~30 VDC
2 Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
2 Open collector to 30V, 100 mA max. load 300 mW for each module
6 differential
2 0~10 V
16-bit
10 samples/second
Modbus/TCP, TCP/IP, UDP, and HTTP
Ethernet: 10/100Mbps
Ethernet: 100 m
N/A

Digital I/O Modules

Power Supply

Digital Input

Digital Output

Peer-to-Peer

Connector

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-6050

18-ch Isolated Digital I/O Modbus TCP Module

• 12-ch DI, 6-ch DO, Ethernet-based smart I/O
• Remote monitoring and control with mobile devices
• Group configuration capability for multiple module setup
• Flexible user-defined Modbus address

Specifications

General	Description	18-ch Isolated Digital I/O Modbus TCP Module
Display	LED Indicators	Status, Comm, Link, Speed
Power Supply	Power Requirement	10~30 VDC
General	Watchdog Timer	System (1.6 second) & Communication (programmable)
	Connector	1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power)
	Temperature (Operating)	-20 ~ 70°C (-4 ~ 158°F)
	Humidity	20~95 %RH
	Temperature (Storage)	-30 ~ 80°C (-22 ~ 176°F)
	Interface	10/100Base-T(X)
	Peer-to-Peer	Yes
	GCL	Yes
	Isolation Protection	2000 VDC
	Communication Protocol	Modbus/TCP, TCP/IP, UDP, and HTTP
	Communication Speed	Ethernet: 10/100Mbps
	Comm. Distance	Ethernet: 100 m
Digital Input	Channels	12
Digital Input	Input Voltage	Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 3 VDC max. Logic level 1: 10~30 VDC
Digital Output	Channels	6 (Sink type) Open collector to 30V, 100 mA max. load Support 5 kHz pulse output

Downloads

Datasheets

ADAM-6050 Datasheet

10~30 VDC
12 Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 3 VDC max. Logic level 1: 10~30 VDC
Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 3 VDC max. Logic level 1: 10~30 VDC
YES
1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power)
Modbus/TCP, TCP/IP, UDP, and HTTP
Ethernet: 10/100Mbps
Ethernet: 100 m
N/A

Digital I/O Modules

Power Supply

Digital Input

Digital Output

Peer-to-Peer

Connector

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-6051

14-ch Isolated Digital I/O Modbus TCP Module with 2-ch Counter

• 12-ch DI, 2-ch DO, 2-ch counter, Ethernet-based smart I/O
• Remote monitoring and control with mobile devicesRemote monitoring and control with mobile devices
• Group configuration capability for multiple module setup
• Flexible user-defined Modbus addressFlexible user-defined Modbus address

Specifications

Display	LED Indicators	Status, Comm, Link, Speed
Power Supply	Power Requirement	10~30 VDC
Digital I/O	Frequency Input	2 independent counters (32-bit + 1-bit overflow, 0~4.5kHz) DI counters (32-bit + 1-bit overflow, 3kHz max.)
General	Watchdog Timer	System (1.6 second) & Communication (programmable)
	Connector	1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power)
	Temperature (Operating)	-20 ~ 70°C (-4 ~ 158°F)
	Humidity	20~95 %RH
	Temperature (Storage)	-30 ~ 80°C (-22 ~ 176°F)
	Interface	10/100Base-T(X)
	Peer-to-Peer	Yes
	GCL	Yes
	Isolation Protection	2000 VDC
	Communication Protocol	Modbus/TCP, TCP/IP, UDP, and HTTP
	Communication Speed	Ethernet: 10/100Mbps
	Comm. Distance	Ethernet: 100 m
Digital Input	Channels	12
Digital Input	Input Voltage	Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
Digital Output	Channels	2 (Sink type) Open collector to 30V, 100 mA max. load Support 5 kHz pulse output

Downloads

Datasheets

ADAM-6051 Datasheet

10~30 VDC
12 Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
2 (Sink type) Open collector to 30V, 100 mA max. load Support 5 kHz pulse output
YES
1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power)
Modbus/TCP, TCP/IP, UDP, and HTTP
Ethernet: 10/100Mbps
Ethernet: 100 m
2 independent counters (32-bit + 1-bit overflow, 0~4.5kHz) DI counters (32-bit + 1-bit overflow, 3kHz max.)

Digital I/O Modules

Power Supply

Digital Input

Digital Output

Peer-to-Peer

Connector

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-6052

16-ch Source-type Isolated Digital I/O Modbus TCP Module

• 8-ch DI, 8-ch DO, Ethernet-based smart I/O
• Remote monitoring and control with mobile devices
• Remote monitoring and control with mobile devices
• Flexible user-defined Modbus address
• Intelligent control ability by Peer-to-Peer and GCL function
• Active I/O message by data stream or event trigger function
• Multiple protocol support: Modbus TCP, TCP/IP, UDP, HTTP, DHCP
• Web language support: XML, HTML 5, Java Script

Specifications

Display	LED Indicators	Status, Comm, Link, Speed
Power Supply	Power Requirement	10~30 VDC
Digital I/O	Frequency Input	DI counters (32-bit + 1-bit overflow, 3kHz max.)
General	Watchdog Timer	System (1.6 second) & Communication (programmable)
	Connector	1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power)
	Temperature (Operating)	-20 ~ 70°C (-4 ~ 158°F)
	Humidity	20~95 %RH
	Temperature (Storage)	-30 ~ 80°C (-22 ~ 176°F)
	Interface	10/100Base-T(X)
	Peer-to-Peer	Yes
	GCL	Yes
	Isolation Protection	2000 VDC
	Communication Protocol	Modbus/TCP, TCP/IP, UDP, and HTTP
	Communication Speed	Ethernet: 10/100Mbps
	Comm. Distance	Ethernet: 100 m
Digital Input	Channels	8
Digital Input	Input Voltage	Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
Digital Output	Channels	8 (Source type) 10~35 VDC, 1 A per ch. Support 5 kHz pulse outpu

Downloads

Datasheets

ADAM-6052 Datasheet

10~30 VDC
8 Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
8 (Source type) 10~35 VDC, 1 A per ch. Support 5 kHz pulse output
YES
1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power)
Modbus/TCP, TCP/IP, UDP, and HTTP
Ethernet: 10/100Mbps
Ethernet: 100 m
DI counters (32-bit + 1-bit overflow, 3kHz max.)

Digital I/O Modules

Power Supply

Digital Input

Digital Output

Peer-to-Peer

Connector

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-6060

6-ch Digital Input and 6-ch Relay Modbus TCP Module

• 6-ch DI, 6-ch RL, Ethernet-based smart I/O
• Remote monitoring and control with mobile devices
• Group configuration capability for multiple module setup
• Flexible user-defined Modbus address
• Intelligent control ability by Peer-to-Peer and GCL function
• Active I/O message by data stream or event trigger function
• Multiple protocol support: Modbus TCP, TCP/IP, UDP, HTTP, DHCP
• Web language support: XML, HTML 5, Java Script

Specifications

Display	LED Indicators	Status, Comm, Link, Speed
Power Supply	Power Requirement	10~30 VDC
Digital I/O	Frequency Input	DI counters (32-bit + 1-bit overflow, 3kHz max.)
General	Watchdog Timer	System (1.6 second) & Communication (programmable)
	Connector	1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power)
	Temperature (Operating)	-20 ~ 70°C (-4 ~ 158°F)
	Humidity	20~95 %RH
	Temperature (Storage)	-30 ~ 80°C (-22 ~ 176°F)
	Interface	10/100Base-T(X)
	Peer-to-Peer	Yes
	GCL	Yes
	Isolation Protection	2000 VDC
	Communication Protocol	Modbus/TCP, TCP/IP, UDP, and HTTP
	Communication Speed	Ethernet: 10/100Mbps
	Comm. Distance	Ethernet: 100 m
Digital Input	Channels	6
Digital Input	Input Voltage	Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
Digital Output	Channels	6-ch relay Support pulse output

Downloads

Datasheets

ADAM-6060 Datasheet

10~30 VDC
6 Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
6-ch relay Support pulse output
YES
1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power)
Modbus/TCP, TCP/IP, UDP, and HTTP
Ethernet: 10/100Mbps
Ethernet: 100 m
DI counters (32-bit + 1-bit overflow, 3kHz max.)

Digital I/O Modules

Power Supply

Digital Input

Digital Output

Peer-to-Peer

Connector

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-6066

6-ch Digital Input and 6-ch Power Relay Modbus TCP Module

• 6-ch DI, 6-ch RL, Ethernet-based smart I/O
• Remote monitoring and control with mobile devices
• Group configuration capability for multiple module setup
• Flexible user-defined Modbus address
• Intelligent control ability by Peer-to-Peer and GCL function
• Active I/O message by data stream or event trigger function
• Multiple protocol support: Modbus TCP, TCP/IP, UDP, HTTP, DHCP
• Web language support: XML, HTML 5, Java Script

Specifications

Display	LED Indicators	Status, Comm, Link, Speed
Power Supply	Power Requirement	10~30 VDC
Digital I/O	Frequency Input	DI counters (32-bit + 1-bit overflow, 3kHz max.)
General	Watchdog Timer	System (1.6 second) & Communication (programmable)
	Connector	1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power)
	Temperature (Operating)	-20 ~ 70°C (-4 ~ 158°F)
	Humidity	20~95 %RH
	Temperature (Storage)	-30 ~ 80°C (-22 ~ 176°F)
	Interface	10/100Base-T(X)
	Peer-to-Peer	Yes
	GCL	Yes
	Isolation Protection	2000 VDC
	Communication Protocol	Modbus/TCP, TCP/IP, UDP, and HTTP
	Communication Speed	Ethernet: 10/100Mbps
	Comm. Distance	Ethernet: 100 m
Digital Input	Channels	6
Digital Input	Input Voltage	Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
Digital Output	Channels	6-ch power relay Support pulse output

Downloads

Datasheets

ADAM-6066 Datasheet

10~30 VDC
6 Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
6-ch power relay Support pulse output
YES
1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power)
Modbus/TCP, TCP/IP, UDP, and HTTP
Ethernet: 10/100Mbps
Ethernet: 100 m
DI counters (32-bit + 1-bit overflow, 3kHz max.)

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-6117EI

8-ch Isolated Analog Input EtherNet/IP Module

• EtherNet/IP protocol
• High common mode voltage 200 VDC
• Isolation Protection: 2,500 VDC
• 2 x RJ-45 LAN (daisy chain)

Specifications

Display	LED Indicators	Status, Comm, Link, Speed
Power Supply	Power Requirement	10~30 VDC
Analog Input	Channels	8 differential
	Voltage Range	±150 mV ±500 mV ±1 V ±5 V ±10 V
	Current Input	±20 mA 0~ 20 mA 4~20 mA
	Channel Independent Configuration	Yes
	Sampling Rates	12 sample/second (total)
	Resolution	16-bit
	Input Impedance	Voltage: >10 MOhm Current: 120 Ohm
	Span Drift	± 30 ppm/°C
	Zero Drift	± 6 µV/° C
	CMR @ 50/60 Hz	92 dB
	NMR @ 50/60 Hz	60 dB
	High Common Mode	200 VDC
General	Watchdog Timer	System (1.6 second) & Communication (programmable)
	Connector	2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	20~95 %RH
	Temperature (Storage)	-20~80 °C (-4~176 °F)
	Interface	10/100Base-T(X)
	Peer-to-Peer	No
	GCL	No
	Isolation Protection	2500 VDC
	Communication Protocol	EtherNet/IP
	Communication Speed	Ethernet: 10/100Mbps
	Comm. Distance	Ethernet: 100 m

Downloads

Datasheets

ADAM-6117EI Datasheet

10~30 VDC
N/A
N/A
8 differential ±150 mV ±500 mV ±1 V ±5 V ±10 V
N/A
16-bit
12 sample/second (total)
EtherNet/IP
Ethernet: 10/100Mbps
Ethernet: 100 m
C

Digital I/O Modules

Power Supply

Digital Input

Digital Output

Peer-to-Peer

Connector

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-6150EI

15-ch Isolated Digital I/O EtherNet/IP Module

• EtherNet/IP protocol
• 8-ch digital input and 7-ch digital output (sink)
• Normal output current: 0.1 A (per channel)
• 2 x RJ-45 LAN (daisy chain)

Specifications

Display	LED Indicators	Status, Comm, Link, Speed
Power Supply	Power Requirement	10~30 VDC
General	Watchdog Timer	System (1.6 second) & Communication (programmable)
	Connector	2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	20~95 %RH
	Temperature (Storage)	-20~80 °C (-4~176 °F)
	Interface	10/100Base-T(X)
	Peer-to-Peer	No
	GCL	No
	Isolation Protection	2500 VDC
	Communication Protocol	EtherNet/IP
	Communication Speed	Ethernet: 10/100Mbps
	Comm. Distance	Ethernet: 100 m
Digital Input	Channles	8
Digital Input	Input Voltage	Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
Digital Output	Channels	7 (Sink type) 8~35V, 100 mA per channel

Downloads

Datasheets

ADAM-6150EI Datasheet

10~30 VDC
8 Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
7 (Sink type) 8~35V, 100 mA per channel
NO
2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
EtherNet/IP
Ethernet: 10/100Mbps
Ethernet: 100 m
N/A

Digital I/O Modules

Power Supply

Digital Input

Digital Output

Peer-to-Peer

Connector

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-6151EI

16-ch Isolated Digital Input EtherNet/IP Module

• EtherNet/IP protocol
• 16-ch digital input
• Normal output current: 0.1 A (per channel)
• 2 x RJ-45 LAN (daisy chain)

Specifications

Display	LED Indicators	Status, Comm, Link, Speed
Power Supply	Power Requirement	10~30 VDC
General	Watchdog Timer	System (1.6 second) & Communication (programmable)
	Connector	2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	20~95 %RH
	Temperature (Storage)	-20~80 °C (-4~176 °F)
	Interface	10/100Base-T(X)
	Peer-to-Peer	No
	GCL	No
	Isolation Protection	2500 VDC
	Communication Protocol	EtherNet/IP
	Communication Speed	Ethernet: 10/100Mbps
	Comm. Distance	Ethernet: 100 m
Digital Input	Channles	16
Digital Input	Input Voltage	Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC

Downloads

Datasheets

ADAM-6151EI Datasheet

10~30 VDC
16 Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
N/A
NO
2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
EtherNet/IP
Ethernet: 10/100Mbps
Ethernet: 100 m
N/A

Digital I/O Modules

Power Supply

Digital Input

Digital Output

Peer-to-Peer

Connector

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-6156EI

16-ch Isolated Digital Output EtherNet/IP Module

• EtherNet/IP protocol
• 16-ch digital output
• Normal output current: 0.1 A (per channel)
• 2 x RJ-45 LAN (daisy chain)

Specifications

Display	LED Indicators	Status, Comm, Link, Speed
Power Supply	Power Requirement	10~30 VDC
General	Watchdog Timer	System (1.6 second) & Communication (programmable)
	Connector	2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	20~95 %RH
	Temperature (Storage)	-20~80 °C (-4~176 °F)
	Interface	10/100Base-T(X)
	Peer-to-Peer	No
	GCL	No
	Isolation Protection	2500 VDC
	Communication Protocol	EtherNet/IP
	Communication Speed	Ethernet: 10/100Mbps
	Comm. Distance	Ethernet: 100 m
Digital Output	Channels	16 (Sink type) 8~35V, 100 mA per channel

Downloads

Datasheets

ADAM-6156EI Datasheet

10~30 VDC
N/A
16 (Sink type) 8~35V, 100 mA per channel
NO
2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
EtherNet/IP
Ethernet: 10/100Mbps
Ethernet: 100 m
N/A

Digital I/O Modules

Power Supply

Digital Input

Digital Output

Peer-to-Peer

Connector

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-6160EI

6-ch Relay Output EtherNet/IP Module

• EtherNet/IP protocol
• 5 Form C and 1 Form A/B relay output
• Breakdown voltage: 500 VAC (50/60 Hz)
• 2 x RJ-45 LAN (daisy chain)
• Contact Rating: 5 A @ 250 VAC; 5 A @ 30 VDC

Specifications

Display	LED Indicators	Status, Comm, Link, Speed
Power Supply	Power Requirement	10~30 VDC
General	Watchdog Timer	System (1.6 second) & Communication (programmable)
	Connector	2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	20~95 %RH
	Temperature (Storage)	-20~80 °C (-4~176 °F)
	Interface	10/100Base-T(X)
	Peer-to-Peer	No
	GCL	No
	Isolation Protection	2500 VDC
	Communication Protocol	EtherNet/IP
	Communication Speed	Ethernet: 10/100Mbps
	Comm. Distance	Ethernet: 100 m
Digital Output	Channels	5 Form C 1 Form A

Downloads

Datasheets

ADAM-6160EI Datasheet

10~30 VDC
N/A
5 Form C 1 Form A
NO
2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
EtherNet/IP
Ethernet: 10/100Mbps
Ethernet: 100 m
N/A

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-6117PN

8-ch Isolated Analog Input PROFINET Module

• PROFINET protocol
• High common mode voltage 200 VDC
• Isolation Protection: 2,500 VDC
• 2 x RJ-45 LAN (daisy chain)

Specifications

Display	LED Indicators	Status, Comm, Link, Speed
Power Supply	Power Requirement	10~30 VDC
Analog Input	Channels	8 differential
	Voltage Range	±150 mV ±500 mV ±1 V ±5 V ±10 V
	Current Input	±20 mA 0~ 20 mA 4~20 mA
	Channel Independent Configuration	Yes
	Sampling Rates	12 sample/second (total)
	Resolution	16-bit
	Input Impedance	Voltage: >10 MOhm Current: 120 Ohm
	Span Drift	± 30 ppm/°C
	Zero Drift	± 6 µV/° C
	CMR @ 50/60 Hz	92 dB
	NMR @ 50/60 Hz	60 dB
	High Common Mode	200 VDC
General	Watchdog Timer	System (1.6 second) & Communication (programmable)
	Connector	2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	20~95 %RH
	Temperature (Storage)	-20~80 °C (-4~176 °F)
	Interface	10/100Base-T(X)
	Peer-to-Peer	No
	GCL	No
	Isolation Protection	2500 VDC
	Communication Protocol	PROFINET
	Communication Speed	Ethernet: 10/100Mbps
	Comm. Distance	Ethernet: 100 m

Downloads

Datasheets

ADAM-6117PN Datasheet

10~30 VDC
N/A
N/A
8 differential ±150 mV ±500 mV ±1 V ±5 V ±10 V
N/A
16-bit
12 sample/second (total)
PROFINET
Ethernet: 10/100Mbps
Ethernet: 100 m
N/A

Digital I/O Modules

Power Supply

Digital Input

Digital Output

Peer-to-Peer

Connector

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-6151PN

16-ch Isolated Digital Input PROFINET Module

• PROFINET protocol
• 16-ch digital input
• Normal output current: 0.1 A (per channel)
• 2 x RJ-45 LAN (daisy chain)

Specifications

Display	LED Indicators	Status, Comm, Link, Speed
Power Supply	Power Requirement	10~30 VDC
General	Watchdog Timer	System (1.6 second) & Communication (programmable)
	Connector	2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	20~95 %RH
	Temperature (Storage)	-20~80 °C (-4~176 °F)
	Interface	10/100Base-T(X)
	Peer-to-Peer	No
	GCL	No
	Isolation Protection	2500 VDC
	Communication Protocol	PROFINET
	Communication Speed	Ethernet: 10/100Mbps
	Comm. Distance	Ethernet: 100 m
Digital Input	Channles	16
Digital Input	Input Voltage	Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC

Downloads

Datasheets

ADAM-6151PN Datasheet

10~30 VDC
16 Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
N/A
NO
2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
PROFINET
Ethernet: 10/100Mbps
Ethernet: 100 m
N/A

Digital I/O Modules

Power Supply

Digital Input

Digital Output

Peer-to-Peer

Connector

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-6156PN

16-ch Isolated Digital Output PROFINET Module

• PROFINET protocol
• 16-ch digital output
• Normal output current: 0.1 A (per channel)
• 2 x RJ-45 LAN (daisy chain)

Specifications

Display	LED Indicators	Status, Comm, Link, Speed
Power Supply	Power Requirement	10~30 VDC
General	Watchdog Timer	System (1.6 second) & Communication (programmable)
	Connector	2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	20~95 %RH
	Temperature (Storage)	-20~80 °C (-4~176 °F)
	Interface	10/100Base-T(X)
	Peer-to-Peer	No
	GCL	No
	Isolation Protection	2500 VDC
	Communication Protocol	PROFINET
	Communication Speed	Ethernet: 10/100Mbps
	Comm. Distance	Ethernet: 100 m
Digital Output	Channels	16 (Sink type) 8~35V, 100 mA per channel

Downloads

Datasheets

ADAM-6156PN Datasheet

10~30 VDC
N/A
16 (Sink type) 8~35V, 100 mA per channel
NO
2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
PROFINET
Ethernet: 10/100Mbps
Ethernet: 100 m
N/A

Digital I/O Modules

Power Supply

Digital Input

Digital Output

Peer-to-Peer

Connector

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-6160PN

6-ch Relay PROFINET Module
• PROFINET protocol
• 16-ch digital outputPROFINET protocol
• Normal output current: 0.1 A (per channel)
• 2 x RJ-45 LAN (daisy chain)
• Contact Rating: 5 A @ 250 VAC; 5 A @ 30 VDC

Specifications

Display	LED Indicators	Status, Comm, Link, Speed
Power Supply	Power Requirement	10~30 VDC
General	Watchdog Timer	System (1.6 second) & Communication (programmable)
	Connector	2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	20~95 %RH
	Temperature (Storage)	-20~80 °C (-4~176 °F)
	Interface	10/100Base-T(X)
	Peer-to-Peer	No
	GCL	No
	Isolation Protection	2500 VDC
	Communication Protocol	PROFINET
	Communication Speed	Ethernet: 10/100Mbps
	Comm. Distance	Ethernet: 100 m
Digital Output	Channels	5 Form C 1 Form A

Downloads

Datasheets

ADAM-6160PN Datasheet

10~30 VDC
N/A
5 Form C 1 Form A
NO
2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
PROFINET
Ethernet: 10/100Mbps
Ethernet: 100 m
N/A

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-6124PN

4-ch Isolated Analog Output PROFINET Module
• Channel: 4-ch AO
• Output Type: V, mA
• Voltage Range 5V, 10 V, ±5 V, ±10 V
• Current Range 0~20 mA, 4~20 mA
• Input type Dry Contact (Close to GND)

Specifications

Display	LED Indicators	Status, Comm, Link, Speed
Power Supply	Power Requirement	10~30 VDC
Analog Output	Channels	4
	Voltage Range	0~5 V 0~10 V ±5 V ±10 V
	Current Output	0~20 mA 4~20 mA
General	Watchdog Timer	System (1.6 second) & Communication (programmable)
	Connector	2 x RJ-45 (LAN, Daisy Chain)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	20~95 %RH
	Temperature (Storage)	-20~80 °C (-4~176 °F)
	Interface	10/100Base-T(X)
	Peer-to-Peer	No
	GCL	No
	Isolation Protection	2500 VDC
	Communication Protocol	PROFINET
	Communication Speed	Ethernet: 10/100Mbps
	Comm. Distance	Ethernet: 100 m
Digital Input	Channles	4
Digital Input	Input Voltage	Dry contact only: Logic level 0: close to GND Logic level 1: open

Downloads

Datasheets

ADAM-6124PN Datasheet

10~30 VDC
4 Dry contact only: Logic level 0: close to GND Logic level 1: open
N/A
N/A
4 0~5 V 0~10 V ±5 V ±10 V
16-bit
10 sample/secend(total)
PROFINET
Ethernet: 10/100Mbps
Ethernet: 100 m
N/A

Digital I/O Modules

Power Supply

Digital Input

Digital Output

Peer-to-Peer

Connector

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-6150PN

15-ch Isolated Digital I/O PROFINET Module
• PROFINET protocol
• 8-ch digital input and 7-ch digital output (sink)
• Normal output current: 0.1 A (per channel)
• 2 x RJ-45 LAN (daisy chain)

Specifications

Display	LED Indicators	Status, Comm, Link, Speed
Power Supply	Power Requirement	10~30 VDC
General	Watchdog Timer	System (1.6 second) & Communication (programmable)
	Connector	2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	20~95 %RH
	Temperature (Storage)	-20~80 °C (-4~176 °F)
	Interface	10/100Base-T(X)
	Peer-to-Peer	No
	GCL	No
	Isolation Protection	2500 VDC
	Communication Protocol	PROFINET
	Communication Speed	Ethernet: 10/100Mbps
	Comm. Distance	Ethernet: 100 m
Digital Input	Channles	8
Digital Input	Input Voltage	Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
Digital Output	Channels	7 (Sink type) 8~35V, 100 mA per channel

Downloads

Datasheets

ADAM-6150PN Datasheet

10~30 VDC
8 Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
7 (Sink type) 8~35V, 100 mA per channel
NO
2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
PROFINET
Ethernet: 10/100Mbps
Ethernet: 100 m
N/A

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Resolution

Analog Output

Sampling Rates

Communication Protocol

Counter Input

Outdoor Range

Topologies

Battery Input

Frequency Band

Modulation Type

Channels

RF Data Rate

Transmit Power

ADAM-2017PZ

Wireless 6-ch Analog Input Node with Power Amplifier
• IEEE 802.15.4 Wireless Standard
• Supports Star/Tree/Mesh Network Topologies
• Modbus Communication Protocol
• LED Indicators

Specifications

Accuracy	Voltage: +/-0.1% or better (Current) at 25°C, Current: +/-0.2% or better (Current) at 25°C
Channels	6 Non-Isolation (Differential)
CMR @ 50/60 Hz	100 dB
Common Mode Volts	10 VDC
Input Impedance	>10 MΩ (Voltage), 120Ω (Current)
Input Max Voltage	+/-15V
Input Type	mV, V, mA
lnput Range	±150mV, ±500mV, ±1V, ±5V, ±10V, ±20mA, 0~20mA, 4~20 mA
NMR @ 50/60 Hz	65 dB
Protection	16-bit
Sampling Rates	12 sample/second (total)
Span Drift	±25 ppm/°C
Zero Drift	±6 µV/°C
Wireless Network	Frequency Band	ISM 2.4 GHz (2.4 GHz ~ 2.4835 GHz)
	Function	End Device
	IEEE Standard	802.15.4
	Outdoor Range	1000 m
	Transmit Power	15 ± 1 dBm

Downloads

Datasheets

ADAM-2017PZ Datasheet

10~30 VDC
N/A
N/A
6 Non-Isolation (Differential) +/-15V
16-bit
N/A
12 sample/second (total)
Modbus
N/A
1000 m
Star/Tree/Mesh
2*AA Alkaline
ISM 2.4 GHz (2.4 GHz ~ 2.4835 GHz)
DSSS(OQPSK)
6 Non-Isolation (Differential)
250 Kbps
3±1 dBm(ADAM-2017PZ)

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Resolution

Analog Output

Sampling Rates

Communication Protocol

Counter Input

Outdoor Range

Topologies

Battery Input

Frequency Band

Modulation Type

Channels

RF Data Rate

Transmit Power

ADAM-2031Z

Wireless Temperature & Humidity Sensor Node
• 2.4 GHz IEEE 802.15.4 compliant RF
• Low duty cycle and low power consumption
• Outdoor range up to 110 m
• 2.4 GHz IEEE 802.15.4 compliant RF
• Built-in temperature / humidity sensor input

Specifications

Display	LED Indicators	Ext PWR, Error, Status, Level Index
Power Supply	Power Requirement	Power Input: Unregulated 10~30 VDC Battery Input: 2 x AA Alkaline 3 VDC
Analog Input	Channels	1 Temperature Sensor 1 Humidity Sensor
	Sampling Rates	Respond Time: Temperature Sensor:±1 °C/min Humidity Sensor: 8 sec. (Achiving 63% of a step function)
	Resolution	Temperature Sensor: 0.02°C (0.04°F) Humidity Sensor: 0.15%RH
	Span Drift	Long term drift: Temperature Sensor: 0.04°C (0.07°F)/year Humidity Sensor: 0.5%RH/year
General	Connector	1 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	External power: -20~70 °C (-4~158 °F) Battery power: 0~50 °C (32~122 °F)
	Humidity	20~95 %RH
	Temperature (Storage)	-40~85 °C (-40~184 °F)
Wireless Network	IEEE Standard	802.15.4
	Frequency Band	ISM 2.4 GHz (2.4 GHz ~ 2.4835 GHz)
	Channels	11 - 26
	Topology	Star / Tree / Mesh
	Transmit Power	3±1 dBm
	Outdoor Range	110 m
	Modulation Type	DSSS (OQPSK)
	Receiver Sensitivity	-97 dBm
	RF Data Rate	250 kbps
	Function	End Device

Downloads

Datasheets

ADAM-2031Z Datasheet

10~30 VDC
N/A
N/A
+/-15V
16-bit
N/A
12 sample/second (total)
Modbus
N/A
110 m
Star / Tree / Mesh
2 x AA Alkaline 3 VDC
ISM 2.4 GHz (2.4 GHz ~ 2.4835 GHz)
DSSS(OQPSK)
6 Non-Isolation (Differential)
250 Kbps
3±1 dBm(ADAM-2031PZ)

Digital I/O Modules

Power Supply

Digital Input

Digital Output

Connector

Communication Protocol

Counter Input

Outdoor Range

Topologies

Battery Input

Frequency Band

Modulation Type

Channels

RF Data Rate

Transmit Power

ADAM-2051Z

Wireless 8-ch Digital Input Nodee
• 2.4 GHz IEEE 802.15.4 compliant RF
• Low duty cycle and low power consumption
• Outdoor range up to 110 m
• Supports battery input with 2 x AA alkaline batteries
• 10K Ω input resistance

Specifications

Display	LED Indicators	Ext PWR, Error, Status, Level Index
Power Supply	Power Requirement	Power Input: Unregulated 10~30 VDC Battery Input: 2 x AA Alkaline 3 VDC
General	Connector	1 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	External power: -20~70 °C (-4~158 °F) Battery power: 0~50 °C (32~122 °F)
	Humidity	20~95 %RH
	Temperature (Storage)	-40~85 °C (-40~184 °F)
Digital Input	Channles	8
Digital Input	Input Voltage	Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~0.8 VDC max. Logic level 1: 2~5 VDC
Wireless Network	IEEE Standard	802.15.4
	Frequency Band	ISM 2.4 GHz (2.4 GHz ~ 2.4835 GHz)
	Channels	11 - 26
	Topology	Star / Tree / Mesh
	Transmit Power	3±1 dBm
	Outdoor Range	110 m
	Modulation Type	DSSS (OQPSK)
	Receiver Sensitivity	-97 dBm
	RF Data Rate	250 kbps
	Function	End Device

Downloads

Datasheets

ADAM-2051Z Datasheet

10~30 VDC
8 Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~0.8 VDC max. Logic level 1: 2~5 VDC
N/A
1*plug-in terminal block(#14~22AWG)
Modbus
N/A
110 m
Star / Tree / Mesh
2 x AA Alkaline 3 VDC
ISM 2.4 GHz (2.4 GHz ~ 2.4835 GHz)
DSSS(OQPSK)
8
250 Kbps
3±1 dBm(ADAM-2051Z)

Digital I/O Modules

Power Supply

Digital Input

Digital Output

Connector

Communication Protocol

Counter Input

Outdoor Range

Topologies

Battery Input

Frequency Band

Modulation Type

Channels

RF Data Rate

Transmit Power

ADAM-2051PZ

Wireless 8-ch Digital Input Node with Power Amplifier
• 2.4 GHz IEEE 802.15.4 compliant RF
• Low duty cycle and low power consumption
• With high RF output power
• Outdoor range up to 1,000 m
• Supports battery input with 2 x AA alkaline batteries

Specifications

Display	LED Indicators	Ext PWR, Error, Status, Level Index
Power Supply	Power Requirement	Power Input: Unregulated 10~30 VDC Battery Input: 2 x AA Alkaline 3 VDC
General	Connector	1 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	External power: -20~70 °C (-4~158 °F) Battery power: 0~50 °C (32~122 °F)
	Humidity	20~95 %RH
	Temperature (Storage)	-40~85 °C (-40~184 °F)
Digital Input	Channles	8
Digital Input	Input Voltage	Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~0.8 VDC max. Logic level 1: 2~5 VDC
Wireless Network	IEEE Standard	802.15.4
	Frequency Band	ISM 2.4 GHz (2.4 GHz ~ 2.4835 GHz)
	Channels	11 - 26
	Topology	Star / Tree / Mesh
	Transmit Power	19±1 dBm
	Outdoor Range	1000 m
	Modulation Type	DSSS (OQPSK)
	Receiver Sensitivity	-97 dBm
	RF Data Rate	250 kbps
	Function	End Device

Downloads

Datasheets

ADAM-2051PZ Datasheet

10~30 VDC
8 Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~0.8 VDC max. Logic level 1: 2~5 VDC
N/A
1*plug-in terminal block(#14~22AWG)
Modbus
N/A
1000 m
Star / Tree / Mesh
2 x AA Alkaline 3 VDC
ISM 2.4 GHz (2.4 GHz ~ 2.4835 GHz)
DSSS(OQPSK)
11 - 26
250 Kbps
19±1 dBm

Remote I/O Modules

Interesting to know

Robust Remote I/O Modules

Robust Remote I/O Modules

Robust Remote I/O Modules

Robust Remote I/O Modules

Controller Modules

Controller Modules

Controller Modules

Analog I/O Modules

Analog I/O Modules

Analog I/O Modules

Analog I/O Modules

Analog I/O Modules

Analog I/O Modules

Analog I/O Modules

Analog I/O Modules

Analog I/O Modules

Analog I/O Modules

Analog I/O Modules

Analog I/O Modules

Analog I/O Modules

Analog I/O Modules

Digital I/O Modules

Digital I/O Modules

Digital I/O Modules

Digital I/O Modules

Digital I/O Modules

Digital I/O Modules

Digital I/O Modules

Digital I/O Modules

Digital I/O Modules

Digital I/O Modules

Analog I/O Modules

Digital I/O Modules

Analog I/O Modules

Analog I/O Modules

Digital I/O Modules