Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4011

1-ch Thermocouple Input Module

• Input type: Thermocouple, mV, V or mA
• Isolation voltage: 3000 VDC
• Watchdog Timer

Analog input modules use a microprocessor-controlled integrating A/D converter to convert sensor voltage, current, thermocouple, or RTD signals into digital data. The digital data is then translated into either engineering units, twos complement hexadecimal format or percentage of full-scale range (FSR)according to the module ’s configuration. When prompted by the host computer, the data is sent through a standard RS-485 interface. The Analog Input Modules offer signal conditioning, A/D conversion, ranging, and RS-485 digital communication functions. They protect your equipment from ground loops and power surges by providing opto-isolation of the A/D input and transformer based isolation up to 3000 V DC . (ADAM-4011 has transformer-based isolation up to 500 V DC )

Downloads

Datasheets

ADAM-4011 Datasheet

10~30 VDC
N/A
2, open collector to 30 V, 30 mA max. load
±15 mV, ±50 mV, ±100 mV,±500 mV, ±1 V,±2.5 V, ±20 mA J,R,K,S,T,B,E
N/A
16-bit
10 samples/second
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4012

1-ch Thermocouple Input Module

• Input type: Input type: mV, V or mA

Specifications

Display	LED Indicators	Power
Power Supply	Power Requirement	10~30 VDC
Analog Input	Channels	1 differential
	Voltage Range	±150 mV ±500 mV ±1 V ±5 V ±10 V
	Current Input	±20 mA
	Sampling Rates	10 samples/second
	Resolution	16-bit
	Input Impedance	Voltage: 20 MOhm Current: 125 Ohm
	Span Drift	±25 ppm/°C
	Zero Drift	±6 µV/°C
	CMR @ 50/60 Hz	150 dB
	NMR @ 50/60 Hz	100 dB
General	Watchdog Timer	System (1.6 second)
	Connector	1 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	3000 VDC
	Communication Protocol	ASCII command
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes
Digital Input	Channles	1
Digital Input	Input Voltage	Logic level 0: 1 V max. Logic level 1: 3.5~30 V
Digital Output	Channels	2 Open collector to 30V, 30 mA max. load
Digital Output	Power Dissipation	300 mW

Downloads

Datasheets

ADAM-4012 Datasheet

10~30 VDC
1 Logic level 0: 1 V max. Logic level 1: 3.5~30 V
2 Open collector to 30V, 30 mA max. load
1 differential ±150 mV ±500 mV ±1 V ±5 V ±10 V ±20 mA
N/A
16-bit
10 samples/second
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4013

1-ch RTD Input Module

• Built-in Watchdog Timer
• Isolation Voltage 3000 VDC
• Sampling Rate 10 sample/sec
• Accuracy +/- 0.1% or better

Specifications

Display	LED Indicators	Power
Power Supply	Power Requirement	10~30 VDC
Analog Input	Channels	1 (2, 3, or 4-wired)
	Direct Sensor Input	RTD (Pt, or Ni)
	Sampling Rates	10 samples/second
	Resolution	16-bit
	Input Impedance	2 MOhm
	Span Drift	±25 ppm/°C
	Zero Drift	±3 µV/°C
	CMR @ 50/60 Hz	150 dB
	NMR @ 50/60 Hz	100 dB
General	Watchdog Timer	System (1.6 second)
	Connector	1 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	3000 VDC
	Communication Protocol	ASCII command
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes

Downloads

Datasheets

ADAM-4013 Datasheet

10~30 VDC
N/A
N/A
1 (2, 3, or 4-wired) RTD (Pt, or Ni)
N/A
16-bit
10 samples/second
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4015

6-ch RTD Module with Modbus

• 6-channel 2 or 3 wires RTD Input
• Accept Pt100/1000, Balco500, Ni input signals
• Channels configurable for different types of input individually
• Wiring burned-out detectable function
• 3000 VDC A/D to logic isolation

Specifications

Display	LED Indicators	Power
Power Supply	Power Requirement	10~30 VDC
Analog Input	Channels	6 (2 or 3-wired)
	Direct Sensor Input	RTD (Pt, Balco, or Ni)
	Burn-out Detection	Yes
	Sampling Rates	10 samples/second
	Resolution	16-bit
	Input Impedance	10 MOhm
	Span Drift	±25 ppm/°C
	Zero Drift	±3 µV/°C
	CMR @ 50/60 Hz	120 dB
	NMR @ 50/60 Hz	100 dB
General	Watchdog Timer	System (1.6 second) & Communication
	Connector	2 x plug-in terminal block (#14~28 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	3000 VDC
	Communication Protocol	ASCII command & Modbus/RTU
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes

Downloads

Datasheets

ADAM-4015 Datasheet

10~30 VDC
N/A
N/A
6 (2 or 3-wired) RTD (Pt, Balco, or Ni)
N/A
16-bit
10 samples/second
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4015T

6-ch Thermistor Module with Modbus

• Built-in Watchdog timer
• Individual Wire burned-out detection
• Effective Resolution: 16-bit
• Isolation Voltage: 3000Vdc
• Sampling Rate: 10 samples/sec.
• Input Connections: 2 or 3 wires

Specifications

Display	LED Indicators	Power
Power Supply	Power Requirement	10~30 VDC
Analog Input	Channels	6 (2 or 3-wired)
	Direct Sensor Input	Thermistor 3k, 10k
	Burn-out Detection	Yes
	Channel Independent Configuration	Yes
	Sampling Rates	10 samples/second
	Resolution	16-bit
	Input Impedance	10 MOhm
	Span Drift	±25 ppm/°C
	Zero Drift	±3 µV/°C
	CMR @ 50/60 Hz	120 dB
	NMR @ 50/60 Hz	100 dB
General	Watchdog Timer	System (1.6 second) & Communication
	Connector	2 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	3000 VDC
	Communication Protocol	ASCII command & Modbus/RTU
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes

Downloads

Datasheets

ADAM-4015T Datasheet

10~30 VDC
N/A
N/A
6 (2 or 3-wired) Thermistor 3k, 10k
N/A
16-bit
10 samples/second
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4016

6-ch Thermistor Module with Modbus

• Strain Gauge Input
• Watchdog Timer

Specifications

Display	LED Indicators	Power
Power Supply	Power Requirement	10~30 VDC
Analog Input	Channels	1 differential
	Voltage Range	±15 mV ±50 mV ±100 mV ±500 mV
	Current Input	±20 mA
	Sampling Rates	10 samples/second
	Resolution	16-bit
	Input Impedance	Voltage: 2 MOhm Current: 125 Ohm
	Span Drift	±25 ppm/°C
	Zero Drift	±6 µV/°C
	CMR @ 50/60 Hz	92 dB
Analog Output	Channels	1
Analog Output	Voltage Range	0~10 V (30 mA max.)
General	Watchdog Timer	System (1.6 second)
	Connector	2 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	3000 VDC
	Communication Protocol	ASCII command
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes
Digital Output	Channels	4 Open collector to 30V, 30 mA max. load
Digital Output	Power Dissipation	300 mW

Downloads

Datasheets

ADAM-4016 Datasheet

10~30 VDC
N/A
4 Open collector to 30V, 30 mA max. load
1 differential ±15 mV ±50 mV ±100 mV ±500 mV ±20 mA
1 0~10 V (30 mA max.)
16-bit
10 samples/second
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4017

8-ch Analog Input Module

• Channels: Six differential, two single-ended
• Input type: mV, V, mA
• Sampling rate: 10 samples/sec. (total)

Specifications

Display	LED Indicators	Power
Power Supply	Power Requirement	10~30 VDC
Analog Input	Channels	8 differential
	Voltage Range	±150 mV ±500 mV ±1 V ±5 V ±10 V
	Current Input	±20 mA
	Sampling Rates	10 samples/second
	Resolution	16-bit
	Input Impedance	Voltage: 20 MOhm
	Span Drift	±25 ppm/°C
	Zero Drift	±6 µV/°C
	CMR @ 50/60 Hz	92 dB
General	Watchdog Timer	Yes
	Connector	2 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	3000 VDC
	Communication Protocol	ASCII command
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes

Downloads

Datasheets

ADAM-4017 Datasheet

10~30 VDC
N/A
N/A
8 differential ±150 mV ±500 mV ±1 V ±5 V ±10 V ±20 mA
N/A
16-bit
10 samples/second
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4017+

8-ch Analog Input Module with Modbus

• 16-bit resolution
• Eight different inputs
• Software configurable for mV, V or mA inputs
• 3000 Vdc isolation
• Supports Modbus/RTU Protocol
• Supports 4~20mA

Specifications

Display	LED Indicators	Power
Power Supply	Power Requirement	10~30 VDC
Analog Input	Channels	8 differential
	Voltage Range	±150 mV ±500 mV ±1 V ±5 V ±10 V
	Current Input	±20 mA, 4~20mA
	Channel Independent Configuration	Yes
	Sampling Rates	10 samples/second
	Resolution	16-bit
	Input Impedance	Voltage: 20 MOhm Current: 120 Ohm
	Span Drift	±25 ppm/°C
	Zero Drift	±6 µV/°C
	CMR @ 50/60 Hz	120 dB
	NMR @ 50/60 Hz	100 dB
General	Watchdog Timer	System (1.6 second) & Communication
	Connector	2 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	3000 VDC
	Communication Protocol	ASCII command & Modbus/RTU
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes

Downloads

Datasheets

ADAM-4017+ Datasheet

10~30 VDC
N/A
N/A
8 differential ±150 mV ±500 mV ±1 V ±5 V ±10 V ±20 mA, 4~20mA
N/A
16-bit
10 samples/second
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4018

8-ch Analog Input Module with Modbus

• Channels: Six differential, two single-ended
• Input type: Thermocouple, mV, V, mA
• Fault and overvoltage protection
• Watchdog Timer

Specifications

Display	LED Indicators	Power
Power Supply	Power Requirement	10~30 VDC
Analog Input	Channels	8 differential
	Voltage Range	±15 mV ±50 mV ±100 mV ±500 mV ±1 mV ±2.5 mV
	Current Input	±20 mA
	Direct Sensor Input	J, K, T, E, R, S, B Thermocouple
	Sampling Rates	10 samples/second
	Resolution	16-bit
	Input Impedance	Voltage: 20 MOhm
	Span Drift	±25 ppm/°C
	Zero Drift	±3 µV/°C
	CMR @ 50/60 Hz	92 dB
General	Watchdog Timer	Yes
	Connector	2 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	3000 VDC
	Communication Protocol	ASCII command
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes

Downloads

Datasheets

ADAM-4018 Datasheet

10~30 VDC
N/A
N/A
8 differential ±15 mV ±50 mV ±100 mV ±500 mV ±1 mV ±2.5 mV ±20 mA J, K, T, E, R, S, B Thermocouple
N/A
16-bit
10 samples/second
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4018+

8-ch Thermocouple Input Module with Modbus

• 16-bit resolution
• Eight different inputs
• Software configurable for T/C, low level voltage or mA inputs
• Wiring burned-out detectable function
• 3000 Vdc isolation
• Supports Modbus/RTU Protocol
• Supports 4~20mA

Specifications

Display	LED Indicators	Power
Power Supply	Power Requirement	10~30 VDC
Analog Input	Channels	8 differential
	Current Input	±20 mA, 4~20mA
	Direct Sensor Input	J, K, T, E, R, S, B Thermocouple
	Burn-out Detection	Yes (All T/C)
	Channel Independent Configuration	Yes
	Sampling Rates	10 samples/second
	Resolution	16-bit
	Input Impedance	Thermocouple: 20 MOhm Current: 120 Ohm
	Span Drift	±25 ppm/°C
	Zero Drift	±6 µV/°C
General	Watchdog Timer	System (1.6 second) & Communication
	Connector	2 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	3000 VDC
	Communication Protocol	ASCII command & Modbus/RTU
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes

Downloads

Datasheets

ADAM-4018+ Datasheet

10~30 VDC
N/A
N/A
8 differential ±15 mV ±50 mV ±100 mV ±500 mV ±1 mV ±2.5 mV ±20 mA J, K, T, E, R, S, B Thermocouple
N/A
16-bit
10 samples/second
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4019+

8-ch Universal Analog Input Module with Modbus

• Supports 4~20 mA
• Software configurable for mV, V, mA or Thermocouple inputs
• 16-bit resolution
• Isolation voltage 3000 VDC
• Supports Modbus/RTU Protocol
• Burn-out detection function

Specifications

Display	LED Indicators	Power
Power Supply	Power Requirement	10~30 VDC
Analog Input	Channels	8 differential
	Voltage Range	±100 mV ±500 mV ±1 V ±2.5 V ±5 V ±10 V
	Current Input	±20 mA, 4~20mA
	Direct Sensor Input	J, K, T, E, R, S, B Thermocouple
	Burn-out Detection	Yes (4~20 mA & all T/C)
	Channel Independent Configuration	Yes
	Sampling Rates	10 samples/second
	Resolution	16-bit
	Input Impedance	Voltage: 20 MOhm Current: 120 Ohm
	Span Drift	±25 ppm/°C
	Zero Drift	±6 µV/°C
	CMR @ 50/60 Hz	120 dB
	NMR @ 50/60 Hz	100 dB
General	Watchdog Timer	System (1.6 second) & Communication
	Connector	2 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	3000 VDC
	Communication Protocol	ASCII command & Modbus/RTU
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes

Downloads

Datasheets

ADAM-4019+ Datasheet

10~30 VDC
N/A
N/A
8 differential ±15 mV ±50 mV ±100 mV ±500 mV ±1 mV ±2.5 mV ±20 mA J, K, T, E, R, S, B Thermocouple
N/A
16-bit
10 samples/second
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4021

1-ch Analog Output Module

• Output type: mA, V
• Output range: 0 ~ 20 mA, 4 ~ 20 mA, 0 ~ 10 V
• Isolation voltage: 3000 V DC

Specifications

Display	LED Indicators	Power
Power Supply	Power Requirement	10~30 VDC
Analog Output	Channels	1
	Voltage Range	0~10 V
	Current Output	0~20 mA, 4~20mA
General	Watchdog Timer	System (1.6 second)
	Connector	1 x plug-in terminal block (#14~22 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	3000 VDC
	Communication Protocol	ASCII command
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes

Downloads

Datasheets

ADAM-4021 Datasheet

10~30 VDC
N/A
N/A
N/A
1 0~10 V 0~20 mA, 4~20mA
12-bit
N/A
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4022T

2-ch Serial Based Dual Loop PID Controller with Modbus

• Channels: 4
• Input Type: mA, V, Thermistor, RTD
• Input Range: 0 to 20 mA, 4 to 20 mA, 0 to 10 V
• Watchdog Timer

Specifications

Display	LED Indicators	Power
Power Supply	Power Requirement	10~30 VDC
Analog Input	Channels	4 differential
	Voltage Range	0~10 V
	Current Input	0~20 mA, 4~20mA
	Direct Sensor Input	Thermistor 3k, 10k RTD (Pt100, 1000)
	Burn-out Detection	Yes
	Channel Independent Configuration	Yes
	Sampling Rates	10 samples/second (total)
	Resolution	16-bit
	CMR @ 50/60 Hz	92 dB
Analog Output	Channels	2
	Voltage Range	0~10 V
	Current Output	0~20 mA, 4~20mA
General	Watchdog Timer	System (1.6 second)
	Connector	2 x plug-in terminal block (#14~28 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	3000 VDC
	Communication Protocol	ASCII command & Modbus/RTU
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes
Digital Input	Channles	2
Digital Input	Input Voltage	Logic level 0: close to GND Logic level 1: open
Digital Output	Channels	2 Open collector to 30V, 30 mA max. load
Digital Output	Power Dissipation	300 m

Downloads

Datasheets

ADAM-4022T Datasheet

10~30 VDC
2 Logic level 0: close to GND Logic level 1: open
2 Open collector to 30V, 30 mA max. load
4 differential 0~10 V 0~20 mA, 4~20mA Thermistor 3k, 10k RTD (Pt100, 1000)
2 0~10 V 0~20 mA, 4~20mA
12-bit
10 samples/second (total)
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Analog I/O Modules

Power Supply

Digital Input

Digital Output

Analog Input

Analog Output

Resolution

Sampling Rates

Communication Protocol

Communication Speed

Communication Distance

Counter Input

ADAM-4024

4-ch Analog Output Module with Modbus

• 12-bit resolution
• Software configurable for mA or V output in individual channels
• 4 digital inputs for latch output
• 3000 VDC D/A to Logic isolation
• Programmable output slope: 0.125 - 128.0 mA/sec. 0.0625 - 64 V/sec.

Specifications

Display	LED Indicators	Power
Power Supply	Power Requirement	10~30 VDC
Analog Output	Channels	4
	Voltage Range	±10 V
	Current Output	0~20 mA, 4~20mA
General	Watchdog Timer	System (1.6 second) & Communication
	Connector	2 x plug-in terminal block (#14~28 AWG)
	Temperature (Operating)	-10~70 °C (14~158 °F)
	Humidity	5~95 %RH
	Temperature (Storage)	-25~85 °C (-13~185 °F)
	Interface	RS-485
	Isolation Protection	3000 VDC
	Communication Protocol	ASCII command & Modbus/RTU
	Communication Speed	Serial: From 1,200 to 115.2 k
	Comm. Distance	Serial: 1.2 km
	Data Flow Control	Yes
Digital Input	Channles	4
Digital Input	Input Voltage	Logic level

Downloads

Datasheets

ADAM-4024T Datasheet

10~30 VDC
4 Logic level 0: 1 VDC max. Logic level 1: 10~30 VDC
N/A
N/A
4 0~10 V 0~20 mA, 4~20mA
12-bit
N/A
ASCII command
Serial: From 1,200 to 115.2 k
Serial: 1.2 km
N/A

Analog I/O Modules

Interesting to know

Analog I/O Modules

Analog I/O Modules

Analog I/O Modules

Analog I/O Modules

Analog I/O Modules

Analog I/O Modules

Analog I/O Modules

Analog I/O Modules

Analog I/O Modules

Analog I/O Modules

Analog I/O Modules

Analog I/O Modules

Analog I/O Modules

Analog I/O Modules