Warning: session_start(): Cannot send session cookie - headers already sent by (output started at /home/dadehpar/domains/dadehpardazan.ir/public_html/index.php:10) in /home/dadehpar/domains/dadehpardazan.ir/public_html/libraries/joomla/session/session.php on line 532

Warning: session_start(): Cannot send session cache limiter - headers already sent (output started at /home/dadehpar/domains/dadehpardazan.ir/public_html/index.php:10) in /home/dadehpar/domains/dadehpardazan.ir/public_html/libraries/joomla/session/session.php on line 532

Warning: Cannot modify header information - headers already sent by (output started at /home/dadehpar/domains/dadehpardazan.ir/public_html/index.php:10) in /home/dadehpar/domains/dadehpardazan.ir/public_html/libraries/joomfish/route/jfroute.php on line 544

Warning: Cannot modify header information - headers already sent by (output started at /home/dadehpar/domains/dadehpardazan.ir/public_html/index.php:10) in /home/dadehpar/domains/dadehpardazan.ir/public_html/libraries/joomfish/route/jfroute.php on line 545

Warning: Cannot modify header information - headers already sent by (output started at /home/dadehpar/domains/dadehpardazan.ir/public_html/index.php:10) in /home/dadehpar/domains/dadehpardazan.ir/public_html/libraries/joomfish/route/jfroute.php on line 546
 DadePardazan - Remote I/O Modules
DPHI Co.

Remote I/O Modules

ADAM-4000

ADAM-4000

ADAM-4000 modules are the perfect choice for establishing a cost-effective remote I/O system. Customers can benefit from ADAM-4000 modules through its simple wiring using only two wires to communicate with their controller or other RS-485 devices. ADAM-4000 modules use the EIA RS-485 communication protocol; the industry's most widely used bi-directional, balanced transmission line suitable for industrial environments.

View items...

ADAM-6000

ADAM-6000

Advantech's ADAM-6000 accomplishes this integration easily through the latest internet technology, so that it can remotely monitor the device status more flexibly. Advantech's ADAM-6000 modules are empowered by Peer-to-Peer (P2P) and Graphic Condition Logic (GCL), and can perform as standalone products for measurement, control and automation. With Advantech's P2P and GCL technology. With the easy-to-use and intuitive graphic utility, system configurations can be done in an extremely short time. ADAM-6000 series models include: Communication Controllers, Analog Input/Output Modules and Digital Input/Output Modules.

View items...

ADAM-6100EI

ADAM-6100EI

Advantech’s ADAM-6100 series is a new line of Industrial Ethernet Remote I/O modules. Equipped with the EtherNet/IP protocol, the ADAM-6100EI series also allows daisy chain connections, making it possible to transfer data much faster during process control and other industrial automation applications. Daisy chains also provide a more scalable system and helping improve scalability and improving resistance against interference common in factory settings. Their isolated design prevents the ADAM-6100 series from breaking down and helps resist harmful field interference.

View items...

ADAM-6100PN

ADAM-6100PN

Advantech’s ADAM-6100 series is a new line of Industrial PROFINET modules. Equipped with the PROFINET protocol, the ADAM-6100PN series also allows daisy chain connections, making it possible to transfer data much faster during process control and other industrial automation applications. Daisy chains also provide a more scalable system and helping improve scalability and improving resistance against interference common in factory settings. Their isolated design prevents the ADAM-6100 series from breaking down and helps resist harmful field interference.

View items...

ADAM-6200

ADAM-6200

In order to fulfill the transition of requirements and future applications, Advantech releases ADAM-6200 series, a new selection of Ethernet I/O family comprised of analog I/O, digital I/O and relay modules. ADAM-6200 series module possesses plenty of advanced features whatever the evolution of hardware design and what’s worth expecting for user is a variety of useful software functions to make it effective in the application field. With new design and strong capabilities, ADAM-6200 can be a well-integrated I/O solution in Ethernet control system.

View items...

ADAM-2000

ADAM-2000

Integrated with wireless functionality, power management, and I/O technologies, the ADAM-2000 series are revolutionary products for data acquisition. Based on the IEEE 802.15.4 wireless standard, networks can be easily deployed and extended. Moreover, low rates and low duty cycles make it possible for them to act as standalone devices, providing cost-effective distributed I/O solutions. With the popular industrial communication protocol Modbus RTU, ADAM-2000 series products can be adapted into any SCADA or industrial system with Advantech products, such as IPCs, ADAM, EKI, or WebAccess.

View items...

Interesting to know

We have launched another attractive and multi-functional TC controller in DIN Rail format with removable socket. The E5DC with a single loop follows the outstanding control performance of the E5_C... Read more...

Robust Remote I/O Modules

Number of channels
Input
Output
Resolution
Sampling Rates
Communication Protocol
Counter Input

Robust 8-ch Analog Input Module with Modbus

• 8 differential and independent configuration channels
• Broader operating temperature range
• LED display allows to monitor the status address settings
• Higher noise immunity: 1 kV surge protection on power inputs, 3 kV EFT, and 8 kV ESD protection
• Broader power input range: 10 ~ 48VDC
• Supports 200 VDC high common mode voltage
• Supports unipolar and bipolar input
• Supports ± 15 V input range
• Supports filter auto-turning or filter-out 50 Hz / 60 Hz
• Online firmware update

Specifications

 

Display LED Indicators Status, Comm, and Ch. enable
Power Supply Power Requirement 10~48 VDC
Analog Input Channels 8 differential
Voltage Range 0~150 mV 0~500 mV 0~1V 0~5 V 0~10 V ±150 mV ±500 mV ±1 V ±5 V ±10 V ±15 V
Current Input ±20 mA 0~ 20 mA 4~20 mA
Burn-out Detection Yes (4~20 mA)
Channel Independent Configuration Yes
Sampling Rates 10/100 samples/second (total)
Resolution 16-bit
Input Impedance Voltage: 20 MOhm Current: 120 Ohm
Span Drift ±25 ppm/°C
Zero Drift ±6 µV/°C
CMR @ 50/60 Hz 92 dB
NMR @ 50/60 Hz 60 dB
High Common Mode 200 VDC
General Watchdog Timer System (1.6 second) & Communication
Connector 2 x plug-in terminal block (#14~22 AWG)
Temperature (Operating) -40~85°C (40~185 °F)
Humidity 5~95 %RH
Temperature (Storage) -40~85°C (40~185 °F)
Interface RS-485
Isolation Protection 3000 VDC
Communication Protocol ASCII command & Modbus/RTU
Communication Speed Serial: From 1,200 to 115.2 k
Comm. Distance Serial: 1.2 km
Data Flow Control Yes

Downloads

 

Datasheets

ADAM-4117 Datasheet

  • 8 differential
  • 0~150 mV 0~500 mV 0~1V 0~5 V 0~10 V ±150 mV ±500 mV ±1 V ±5 V ±10 V ±15 V ±20 mA 0~ 20 mA 4~20 mA
  • Communication Protocol
  • 16-bit
  • 10/100 samples/second (total)
  • ASCII command & Modbus/RTU
  • N/A

Robust Remote I/O Modules

Number of channels
Input
Output
Resolution
Sampling Rates
Communication Protocol
Counter Input

Robust 8-ch Thermocouple Input Module with Modbus

• 8 differential & independent thermocouple configuration channels
• Broader Operating Temperature Range
• Higher Noise Immunity: 1 kV surge protection on power inputs, 3 kV EFT, and 8 kV ESD protection
• Broader Power Input Range: +10~+48 VDC
• Supports filter auto-tuning or filter out 50 Hz / 60 Hz
• LED display allows to monitor the status address settings
• Online Firmware Update

Specifications

Display LED Indicators Status, Comm, and Ch. enable
Power Supply Power Requirement 10~48 VDC
Analog Input Channels 8 differential
Voltage Range 15 mV ±50 mV ±100 mV ±500 mV ±1 V ±2.5 V
Current Input ±20 mA 4~20 mA
Direct Sensor Input J, K, T, E, R, S, B Thermocouple
Burn-out Detection Yes (4~20 mA & all T/C)
Channel Independent Configuration Yes
Sampling Rates 10/100 samples/second (total)
Resolution 16-bit
Input Impedance Voltage: 20 MOhm Current: 120 Ohm
Span Drift ±25 ppm/°C
Zero Drift ±6 µV/°C
CMR @ 50/60 Hz 92 dB
NMR @ 50/60 Hz 60 dB
High Common Mode 200 VDC
General Watchdog Timer System (1.6 second) & Communication
Connector 2 x plug-in terminal block (#14~22 AWG)
Temperature (Operating) -40~85°C (40~185 °F)
Humidity 5~95 %RH
Temperature (Storage) -40~85°C (40~185 °F)
Interface RS-485
Isolation Protection 3000 VDC
Communication Protocol ASCII command & Modbus/RTU
Communication Speed Serial: From 1,200 to 115.2 k
Comm. Distance Serial: 1.2 km
Data Flow Control Yes

Downloads

 

Datasheets

ADAM-4118 Datasheet

  • 8 differential
  • 15 mV ±50 mV ±100 mV ±500 mV ±1 V ±2.5 V ±20 mA 4~20 mA J, K, T, E, R, S, B Thermocouple
  • Communication Protocol
  • 16-bit
  • 10/100 samples/second (total)
  • ASCII command & Modbus/RTU
  • N/A

Robust Remote I/O Modules

Number of channels
Input
Output
Resolution
Sampling Rates
Communication Protocol
Counter Input

Robust 15-ch Digital I/O Module with Modbus

• 7 input channels and 8 output channels
• Broader Operating Temperature Range
• Higher Noise Immunity: 1 kV surge protection on power inputs, 3 kV EFT, and 8 kV ESD protection
• Broader Power Input Range: +10 ~ +48 VDC
• LED display allows to monitor the status address settings
• Digital Filter Function
• DI channels can be used as 1 kVGz counters
• Over current/ short circuit protection
• DO channels support pulse output function

Specifications

 

Display LED Indicators Status, Comm, and DIO
Power Supply Power Requirement 10~48 VDC
Digital I/O Frequency Input DI counters (32-bit + 1-bit overflow, 3kHz max.)
General Watchdog Timer System (1.6 second) & Communication
Connector 2 x plug-in terminal block (#14~22 AWG)
Temperature (Operating) -40~85°C (40~185 °F)
Humidity 5~95 %RH
Temperature (Storage) -40~85°C (40~185 °F)
Interface RS-485
Isolation Protection 3000 VDC
Communication Protocol ASCII command & Modbus/RTU
Communication Speed Serial: From 1,200 to 115.2 k
Comm. Distance Serial: 1.2 km
Data Flow Control Yes
Digital Input Channles 7
Input Voltage Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 3 VDC max. Logic level 1: 10~30 VDC
Digital Output Channels 8 Open collector to 40V, 1 A max. load Support 1 kHz pulse output
Power Dissipation 1W load max

Downloads

 

Datasheets

ADAM-4150 Datasheet

  • 7 DI, 8DO
  • Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 3 VDC max. Logic level 1: 10~30 VDC
  • 8 Open collector to 40V, 1 A max. load Support 1 kHz pulse output
  • N/A
  • N/A
  • ASCII command & Modbus/RTU
  • DI counters (32-bit + 1-bit overflow, 3kHz max.)

Robust Remote I/O Modules

Number of channels
Input
Output
Resolution
Sampling Rates
Communication Protocol
Counter Input

Robust 8-ch Relay Output Module with Modbus

• 8 Form A output channels
• Broader Operating Temperature Range
• Higher Noise Immunity: 1 kV surge protection on power inputs, 3 kV EFT, and 8 kV ESD Protection
• Broader Power Input Range: +10 ~ +48 VDC
• LED display allows to monitor the status address settings
• DO channels support pulse output function

Specifications

Display LED Indicators Status, Comm, and Relay
Power Supply Power Requirement 10~48 VDC
General Watchdog Timer System (1.6 second) & Communication
Connector 2 x plug-in terminal block (#14~22 AWG)
Temperature (Operating) -40~85°C (40~185 °F)
Humidity 5~95 %RH
Temperature (Storage) -40~85°C (40~185 °F)
Interface RS-485
Isolation Protection 3000 VDC
Communication Protocol ASCII command & Modbus/RTU
Communication Speed Serial: From 1,200 to 115.2 k
Comm. Distance Serial: 1.2 km
Data Flow Control Yes
Digital Output Channels 8-ch relay Support 100 Hz

Downloads

 

Datasheets

ADAM-4168 Datasheet

  • 8 DO
  • Communication Protocol N/A
  • 8-ch relay Support 100 Hz pulse output
  • N/A
  • N/A
  • ASCII command & Modbus/RTU
  • N/A

Controller Modules

Power Supply
Digital Input
Digital Output
Analog Input
Analog Output
Communication Protocol
Communication Speed
Communication Distance
Counter Input

PC-based Communication Controller

• Powerful communication controller in a small package
• Built-in Boot ROM DOS to run PC programs
• Free ROM/RAM memory for user's applications
• 2-wire, multi-drop RS-485 networking
• Communication speed up to 115.2 Kbps
• RS-232/RS-485 modes (jumper selectable)
• Automatic data fl ow control in RS-485 mode
• Built-in real-time clock and watchdog timer
• Easy mounting on a DIN-rail or panel
• Accepts unregulated power sources between 10 to 30 VDC
• Program download cable and utility included

Specifications

Power Supply Power Requirement 10~30 VDC
General Watchdog Timer Yes
Connector RS-232: DB-9 1 x plug-in terminal block (I/O and power)
Temperature (Operating) -10~70 °C (14~158 °F)
Interface RS-232 RS-485
Communication Speed Serial: From 1,200 to 115.2 k
Comm. Distance Serial: 1.2 km
Data Flow Control  

Downloads

 

Datasheets

ADAM-4500 Datasheet

  • 10~30 VDC
  • N/A
  • N/A
  • N.A
  • N/A
  • RS-232 RS-485
  • Serial: From 1,200 to 115.2 k
  • Serial: 1.2 km
  • N/A

Controller Modules

Power Supply
Digital Input
Digital Output
Analog Input
Analog Output
Communication Protocol
Communication Speed
Communication Distance
Counter Input

Ethernet-enabled Communication Controller with 8-ch DI/O

• 10/100Base-T Ethernet Interface
• Email alarm function
• Built-in Web Server
• Built-in FTP Server and Client
• Supports functionally versatile I/O modules
• Full functions of standard TCP and UDP sockets
• Optional 4 digit 7-segment LED display
• Supports Modbus/RTU and Modbus/TCP function libraries
• 1.5 MB Flash ROM/640 KB SRAM
• Four serial ports available
• Integrated all operations in Windows utility

Specifications

Display LED Indicators Power, Run, Battery, Comm
Power Supply Power Requirement 10~30 VDC
General Watchdog Timer Yes
Connector Ethernet: RJ-45
RS-485: plug-in screw terminal RS-232: RJ-48
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 5~95 %RH
Temperature (Storage) -25~85 °C (-13~185 °F)
Interface RS-232 RS-485 10/100Base-T(X)
Isolation Protection 1,000 VDC
Communication Protocol Modbus/RTU, Modbus/TCP, TCP/IP, UDP, ICMP, ARP, DHCP
Communication Speed Serial: From 1,200 to 115.2 Ethernet: 10/100Mbps
Comm. Distance Serial: 1.2 km Ethernet: 100 m
Data Flow Control Yes
Built-in I/O 4DI/4DO
Digital Input Channles 4
Input Voltage Dry contact: Logic level 1: close to GND Logic level 0: open Wet contact: Logic level 1: 2 VDC max. Logic level 0: 4~30 VDC
Digital Output Channels 4 Open collector to 40V, 2

Downloads

 

Datasheets

ADAM-4501 Datasheet

  • 10~30 VDC
  • 4 Dry contact: Logic level 1: close to GND Logic level 0: open Wet contact: Logic level 1: 2 VDC max. Logic level 0: 4~30 VDC
  • 4 Open collector to 40V, 200 mA max. load
  • N.A
  • N/A
  • Modbus/RTU, Modbus/TCP, TCP/IP, UDP, ICMP, ARP, DHCP
  • Serial: From 1,200 to 115.2 Ethernet: 10/100Mbps
  • Serial: 1.2 km Ethernet: 100 m
  • N/A

Controller Modules

Power Supply
Digital Input
Digital Output
Analog Input
Analog Output
Communication Protocol
Communication Speed
Communication Distance
Counter Input

Ethernet-enabled Communication Controller with 2-ch AI/O and 4-ch DI/O

• 10/100Base-T(X) Ethernet interface
• Email alarm function
• Built-in web server
• Built-in FTP server and client
• Supports functionally versatile I/O modules
• Full functions of standard TCP and UDP sockets
• Supports Modbus/RTU and Modbus/TCP function libraries
• 1.5 MB Flash ROM/640 KB SRAM
• 4 serial ports
• Integrated all operations in Windows utility

Specifications

Display LED Indicators Power, Run, Battery, Comm
Power Supply Power Requirement 10~30 VDC
Analog Input Channels 1
Voltage Range ±150 mV ±500 mV ±1 V ±2.5 V ±5 V ±10 V
Current Input ±20 mA
Sampling Rates 10 samples/second
Resolution 16-bit
Analog Output Channels 1
Voltage Range 0~10 V
Current Output 0~20 mA
General Watchdog Timer Yes
Connector Ethernet: RJ-45
RS-485: plug-in screw terminal RS-232: RJ-48
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 5~95 %RH
Temperature (Storage) -25~85 °C (-13~185 °F)
Interface RS-232 RS-485 10/100Base-T(X)
Isolation Protection 1,000 VDC
Communication Protocol Modbus/RTU, Modbus/TCP, TCP/IP, UDP, ICMP, ARP, DHCP
Communication Speed Serial: From 1,200 to 115.2 Ethernet: 10/100Mbps
Comm. Distance Serial: 1.2 km Ethernet: 100 m
Data Flow Control Yes
Built-in I/O 1AI/1AO/2DI/2DO
Digital Input Channles 2
Input Voltage Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 2 VDC max. Logic level 1: 4~30 VDC
Digital Output Channels 2 Open collector to 40V, 200 mA m

Downloads

 

Datasheets

ADAM-4502 Datasheet

  • 10~30 VDC
  • 2 Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 2 VDC max. Logic level 1: 4~30 VDC
  • 2 Open collector to 40V, 200 mA max. load
  • 1 Channel: ±150 mV ±500 mV ±1 V ±2.5 V ±5 V ±10 V ±20 mA
  • 1 Channel: 0~10 V 0~20 mA
  • Modbus/RTU, Modbus/TCP, TCP/IP, UDP, ICMP, ARP, DHCP
  • Serial: From 1,200 to 115.2 Ethernet: 10/100Mbps
  • Serial: 1.2 km Ethernet: 100 m
  • N/A

Analog I/O Modules

Power Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input

1-ch Thermocouple Input Module

• Input type: Input type: mV, V or mA

Specifications

Display LED Indicators Power
Power Supply Power Requirement 10~30 VDC
Analog Input Channels 1 differential
Voltage Range ±150 mV ±500 mV ±1 V ±5 V ±10 V
Current Input ±20 mA
Sampling Rates 10 samples/second
Resolution 16-bit
Input Impedance Voltage: 20 MOhm Current: 125 Ohm
Span Drift ±25 ppm/°C
Zero Drift ±6 µV/°C
CMR @ 50/60 Hz 150 dB
NMR @ 50/60 Hz 100 dB
General Watchdog Timer System (1.6 second)
Connector 1 x plug-in terminal block (#14~22 AWG)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 5~95 %RH
Temperature (Storage) -25~85 °C (-13~185 °F)
Interface RS-485
Isolation Protection 3000 VDC
Communication Protocol ASCII command
Communication Speed Serial: From 1,200 to 115.2 k
Comm. Distance Serial: 1.2 km
Data Flow Control Yes
Digital Input Channles 1
Input Voltage Logic level 0: 1 V max. Logic level 1: 3.5~30 V
Digital Output Channels 2 Open collector to 30V, 30 mA max. load
Power Dissipation 300 mW

Downloads

 

Datasheets

ADAM-4012 Datasheet

  • 10~30 VDC
  • 1 Logic level 0: 1 V max. Logic level 1: 3.5~30 V
  • 2 Open collector to 30V, 30 mA max. load
  • 1 differential ±150 mV ±500 mV ±1 V ±5 V ±10 V ±20 mA
  • N/A
  • 16-bit
  • 10 samples/second
  • ASCII command
  • Serial: From 1,200 to 115.2 k
  • Serial: 1.2 km
  • N/A

Analog I/O Modules

Power Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input

1-ch RTD Input Module

• Built-in Watchdog Timer
• Isolation Voltage 3000 VDC
• Sampling Rate 10 sample/sec
• Accuracy +/- 0.1% or better

Specifications

Display LED Indicators Power
Power Supply Power Requirement 10~30 VDC
Analog Input Channels 1 (2, 3, or 4-wired)
Direct Sensor Input RTD (Pt, or Ni)
Sampling Rates 10 samples/second
Resolution 16-bit
Input Impedance 2 MOhm
Span Drift ±25 ppm/°C
Zero Drift ±3 µV/°C
CMR @ 50/60 Hz 150 dB
NMR @ 50/60 Hz 100 dB
General Watchdog Timer System (1.6 second)
Connector 1 x plug-in terminal block (#14~22 AWG)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 5~95 %RH
Temperature (Storage) -25~85 °C (-13~185 °F)
Interface RS-485
Isolation Protection 3000 VDC
Communication Protocol ASCII command
Communication Speed Serial: From 1,200 to 115.2 k
Comm. Distance Serial: 1.2 km
Data Flow Control Yes

Downloads

 

Datasheets

ADAM-4013 Datasheet

  • 10~30 VDC
  • N/A
  • N/A
  • 1 (2, 3, or 4-wired) RTD (Pt, or Ni)
  • N/A
  • 16-bit
  • 10 samples/second
  • ASCII command
  • Serial: From 1,200 to 115.2 k
  • Serial: 1.2 km
  • N/A

Analog I/O Modules

Power Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input

6-ch RTD Module with Modbus

• 6-channel 2 or 3 wires RTD Input
• Accept Pt100/1000, Balco500, Ni input signals
• Channels configurable for different types of input individually
• Wiring burned-out detectable function
• 3000 VDC A/D to logic isolation


Specifications

Display LED Indicators Power
Power Supply Power Requirement 10~30 VDC
Analog Input Channels 6 (2 or 3-wired)
Direct Sensor Input RTD (Pt, Balco, or Ni)
Burn-out Detection Yes
Sampling Rates 10 samples/second
Resolution 16-bit
Input Impedance 10 MOhm
Span Drift ±25 ppm/°C
Zero Drift ±3 µV/°C
CMR @ 50/60 Hz 120 dB
NMR @ 50/60 Hz 100 dB
General Watchdog Timer System (1.6 second) & Communication
Connector 2 x plug-in terminal block (#14~28 AWG)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 5~95 %RH
Temperature (Storage) -25~85 °C (-13~185 °F)
Interface RS-485
Isolation Protection 3000 VDC
Communication Protocol ASCII command & Modbus/RTU
Communication Speed Serial: From 1,200 to 115.2 k
Comm. Distance Serial: 1.2 km
Data Flow Control Yes

Downloads

 

Datasheets

ADAM-4015 Datasheet

  • 10~30 VDC
  • N/A
  • N/A
  • 6 (2 or 3-wired) RTD (Pt, Balco, or Ni)
  • N/A
  • 16-bit
  • 10 samples/second
  • ASCII command
  • Serial: From 1,200 to 115.2 k
  • Serial: 1.2 km
  • N/A

Analog I/O Modules

Power Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input

6-ch Thermistor Module with Modbus

• Built-in Watchdog timer
• Individual Wire burned-out detection
• Effective Resolution: 16-bit
• Isolation Voltage: 3000Vdc
• Sampling Rate: 10 samples/sec.
• Input Connections: 2 or 3 wires


Specifications

Display LED Indicators Power
Power Supply Power Requirement 10~30 VDC
Analog Input Channels 6 (2 or 3-wired)
Direct Sensor Input Thermistor 3k, 10k
Burn-out Detection Yes
Channel Independent Configuration Yes
Sampling Rates 10 samples/second
Resolution 16-bit
Input Impedance 10 MOhm
Span Drift ±25 ppm/°C
Zero Drift ±3 µV/°C
CMR @ 50/60 Hz 120 dB
NMR @ 50/60 Hz 100 dB
General Watchdog Timer System (1.6 second) & Communication
Connector 2 x plug-in terminal block (#14~22 AWG)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 5~95 %RH
Temperature (Storage) -25~85 °C (-13~185 °F)
Interface RS-485
Isolation Protection 3000 VDC
Communication Protocol ASCII command & Modbus/RTU
Communication Speed Serial: From 1,200 to 115.2 k
Comm. Distance Serial: 1.2 km
Data Flow Control Yes

Downloads

 

Datasheets

ADAM-4015T Datasheet

  • 10~30 VDC
  • N/A
  • N/A
  • 6 (2 or 3-wired) Thermistor 3k, 10k
  • N/A
  • 16-bit
  • 10 samples/second
  • ASCII command
  • Serial: From 1,200 to 115.2 k
  • Serial: 1.2 km
  • N/A

Analog I/O Modules

Power Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input

6-ch Thermistor Module with Modbus

• Strain Gauge Input
• Watchdog Timer


Specifications

Display LED Indicators Power
Power Supply Power Requirement 10~30 VDC
Analog Input Channels 1 differential
Voltage Range ±15 mV ±50 mV ±100 mV ±500 mV
Current Input ±20 mA
Sampling Rates 10 samples/second
Resolution 16-bit
Input Impedance Voltage: 2 MOhm Current: 125 Ohm
Span Drift ±25 ppm/°C
Zero Drift ±6 µV/°C
CMR @ 50/60 Hz 92 dB
Analog Output Channels 1
Voltage Range 0~10 V (30 mA max.)
General Watchdog Timer System (1.6 second)
Connector 2 x plug-in terminal block (#14~22 AWG)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 5~95 %RH
Temperature (Storage) -25~85 °C (-13~185 °F)
Interface RS-485
Isolation Protection 3000 VDC
Communication Protocol ASCII command
Communication Speed Serial: From 1,200 to 115.2 k
Comm. Distance Serial: 1.2 km
Data Flow Control Yes
Digital Output Channels 4 Open collector to 30V, 30 mA max. load
Power Dissipation 300 mW

Downloads

 

Datasheets

ADAM-4016 Datasheet

  • 10~30 VDC
  • N/A
  • 4 Open collector to 30V, 30 mA max. load
  • 1 differential ±15 mV ±50 mV ±100 mV ±500 mV ±20 mA
  • 1 0~10 V (30 mA max.)
  • 16-bit
  • 10 samples/second
  • ASCII command
  • Serial: From 1,200 to 115.2 k
  • Serial: 1.2 km
  • N/A

Analog I/O Modules

Power Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input

8-ch Analog Input Module with Modbus

• 16-bit resolution
• Eight different inputs
• Software configurable for mV, V or mA inputs
• 3000 Vdc isolation
• Supports Modbus/RTU Protocol
• Supports 4~20mA

Specifications

Display LED Indicators Power
Power Supply Power Requirement 10~30 VDC
Analog Input Channels 8 differential
Voltage Range ±150 mV ±500 mV ±1 V ±5 V ±10 V
Current Input ±20 mA, 4~20mA
Channel Independent Configuration Yes
Sampling Rates 10 samples/second
Resolution 16-bit
Input Impedance Voltage: 20 MOhm Current: 120 Ohm
Span Drift ±25 ppm/°C
Zero Drift ±6 µV/°C
CMR @ 50/60 Hz 120 dB
NMR @ 50/60 Hz 100 dB
General Watchdog Timer System (1.6 second) & Communication
Connector 2 x plug-in terminal block (#14~22 AWG)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 5~95 %RH
Temperature (Storage) -25~85 °C (-13~185 °F)
Interface RS-485
Isolation Protection 3000 VDC
Communication Protocol ASCII command & Modbus/RTU
Communication Speed Serial: From 1,200 to 115.2 k
Comm. Distance Serial: 1.2 km
Data Flow Control Yes

Downloads

 

Datasheets

ADAM-4017+ Datasheet

  • 10~30 VDC
  • N/A
  • N/A
  • 8 differential ±150 mV ±500 mV ±1 V ±5 V ±10 V ±20 mA, 4~20mA
  • N/A
  • 16-bit
  • 10 samples/second
  • ASCII command
  • Serial: From 1,200 to 115.2 k
  • Serial: 1.2 km
  • N/A

Analog I/O Modules

Power Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input

8-ch Analog Input Module with Modbus

• Channels: Six differential, two single-ended
• Input type: Thermocouple, mV, V, mA
• Fault and overvoltage protection
• Watchdog Timer

Specifications

Display LED Indicators Power
Power Supply Power Requirement 10~30 VDC
Analog Input Channels 8 differential
Voltage Range ±15 mV ±50 mV ±100 mV ±500 mV ±1 mV ±2.5 mV
Current Input ±20 mA
Direct Sensor Input J, K, T, E, R, S, B Thermocouple
Sampling Rates 10 samples/second
Resolution 16-bit
Input Impedance Voltage: 20 MOhm
Span Drift ±25 ppm/°C
Zero Drift ±3 µV/°C
CMR @ 50/60 Hz 92 dB
General Watchdog Timer Yes
Connector 2 x plug-in terminal block (#14~22 AWG)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 5~95 %RH
Temperature (Storage) -25~85 °C (-13~185 °F)
Interface RS-485
Isolation Protection 3000 VDC
Communication Protocol ASCII command
Communication Speed Serial: From 1,200 to 115.2 k
Comm. Distance Serial: 1.2 km
Data Flow Control Yes

Downloads

 

Datasheets

ADAM-4018 Datasheet

  • 10~30 VDC
  • N/A
  • N/A
  • 8 differential ±15 mV ±50 mV ±100 mV ±500 mV ±1 mV ±2.5 mV ±20 mA J, K, T, E, R, S, B Thermocouple
  • N/A
  • 16-bit
  • 10 samples/second
  • ASCII command
  • Serial: From 1,200 to 115.2 k
  • Serial: 1.2 km
  • N/A

Analog I/O Modules

Power Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input

8-ch Thermocouple Input Module with Modbus

• 16-bit resolution
• Eight different inputs
• Software configurable for T/C, low level voltage or mA inputs
• Wiring burned-out detectable function
• 3000 Vdc isolation
• Supports Modbus/RTU Protocol
• Supports 4~20mA

Specifications

Display LED Indicators Power
Power Supply Power Requirement 10~30 VDC
Analog Input Channels 8 differential
Current Input ±20 mA, 4~20mA
Direct Sensor Input J, K, T, E, R, S, B Thermocouple
Burn-out Detection Yes (All T/C)
Channel Independent Configuration Yes
Sampling Rates 10 samples/second
Resolution 16-bit
Input Impedance Thermocouple: 20 MOhm Current: 120 Ohm
Span Drift ±25 ppm/°C
Zero Drift ±6 µV/°C
General Watchdog Timer System (1.6 second) & Communication
Connector 2 x plug-in terminal block (#14~22 AWG)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 5~95 %RH
Temperature (Storage) -25~85 °C (-13~185 °F)
Interface RS-485
Isolation Protection 3000 VDC
Communication Protocol ASCII command & Modbus/RTU
Communication Speed Serial: From 1,200 to 115.2 k
Comm. Distance Serial: 1.2 km
Data Flow Control Yes

Downloads

 

Datasheets

ADAM-4018+ Datasheet

  • 10~30 VDC
  • N/A
  • N/A
  • 8 differential ±15 mV ±50 mV ±100 mV ±500 mV ±1 mV ±2.5 mV ±20 mA J, K, T, E, R, S, B Thermocouple
  • N/A
  • 16-bit
  • 10 samples/second
  • ASCII command
  • Serial: From 1,200 to 115.2 k
  • Serial: 1.2 km
  • N/A

Analog I/O Modules

Power Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input

8-ch Universal Analog Input Module with Modbus

• Supports 4~20 mA
• Software configurable for mV, V, mA or Thermocouple inputs
• 16-bit resolution
• Isolation voltage 3000 VDC
• Supports Modbus/RTU Protocol
• Burn-out detection function

Specifications

Display LED Indicators Power
Power Supply Power Requirement 10~30 VDC
Analog Input Channels 8 differential
Voltage Range ±100 mV ±500 mV ±1 V ±2.5 V ±5 V ±10 V
Current Input ±20 mA, 4~20mA
Direct Sensor Input J, K, T, E, R, S, B Thermocouple
Burn-out Detection Yes (4~20 mA & all T/C)
Channel Independent Configuration Yes
Sampling Rates 10 samples/second
Resolution 16-bit
Input Impedance Voltage: 20 MOhm Current: 120 Ohm
Span Drift ±25 ppm/°C
Zero Drift ±6 µV/°C
CMR @ 50/60 Hz 120 dB
NMR @ 50/60 Hz 100 dB
General Watchdog Timer System (1.6 second) & Communication
Connector 2 x plug-in terminal block (#14~22 AWG)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 5~95 %RH
Temperature (Storage) -25~85 °C (-13~185 °F)
Interface RS-485
Isolation Protection 3000 VDC
Communication Protocol ASCII command & Modbus/RTU
Communication Speed Serial: From 1,200 to 115.2 k
Comm. Distance Serial: 1.2 km
Data Flow Control Yes

Downloads

 

Datasheets

ADAM-4019+ Datasheet

  • 10~30 VDC
  • N/A
  • N/A
  • 8 differential ±15 mV ±50 mV ±100 mV ±500 mV ±1 mV ±2.5 mV ±20 mA J, K, T, E, R, S, B Thermocouple
  • N/A
  • 16-bit
  • 10 samples/second
  • ASCII command
  • Serial: From 1,200 to 115.2 k
  • Serial: 1.2 km
  • N/A

Analog I/O Modules

Power Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input

1-ch Analog Output Module

• Output type: mA, V
• Output range: 0 ~ 20 mA, 4 ~ 20 mA, 0 ~ 10 V
• Isolation voltage: 3000 V DC

Specifications

Display LED Indicators Power
Power Supply Power Requirement 10~30 VDC
Analog Output Channels 1
Voltage Range 0~10 V
Current Output 0~20 mA, 4~20mA
General Watchdog Timer System (1.6 second)
Connector 1 x plug-in terminal block (#14~22 AWG)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 5~95 %RH
Temperature (Storage) -25~85 °C (-13~185 °F)
Interface RS-485
Isolation Protection 3000 VDC
Communication Protocol ASCII command
Communication Speed Serial: From 1,200 to 115.2 k
Comm. Distance Serial: 1.2 km
Data Flow Control Yes

Downloads

 

Datasheets

ADAM-4021 Datasheet

  • 10~30 VDC
  • N/A
  • N/A
  • N/A
  • 1 0~10 V 0~20 mA, 4~20mA
  • 12-bit
  • N/A
  • ASCII command
  • Serial: From 1,200 to 115.2 k
  • Serial: 1.2 km
  • N/A

Analog I/O Modules

Power Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input

2-ch Serial Based Dual Loop PID Controller with Modbus

• Channels: 4
• Input Type: mA, V, Thermistor, RTD
• Input Range: 0 to 20 mA, 4 to 20 mA, 0 to 10 V
• Watchdog Timer

Specifications

Display LED Indicators Power
Power Supply Power Requirement 10~30 VDC
Analog Input Channels 4 differential
Voltage Range 0~10 V
Current Input 0~20 mA, 4~20mA
Direct Sensor Input Thermistor 3k, 10k RTD (Pt100, 1000)
Burn-out Detection Yes
Channel Independent Configuration Yes
Sampling Rates 10 samples/second (total)
Resolution 16-bit
CMR @ 50/60 Hz 92 dB
Analog Output Channels 2
Voltage Range 0~10 V
Current Output 0~20 mA, 4~20mA
General Watchdog Timer System (1.6 second)
Connector 2 x plug-in terminal block (#14~28 AWG)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 5~95 %RH
Temperature (Storage) -25~85 °C (-13~185 °F)
Interface RS-485
Isolation Protection 3000 VDC
Communication Protocol ASCII command & Modbus/RTU
Communication Speed Serial: From 1,200 to 115.2 k
Comm. Distance Serial: 1.2 km
Data Flow Control Yes
Digital Input Channles 2
Input Voltage Logic level 0: close to GND Logic level 1: open
Digital Output Channels 2 Open collector to 30V, 30 mA max. load
Power Dissipation 300 m

Downloads

 

Datasheets

ADAM-4022T Datasheet

  • 10~30 VDC
  • 2 Logic level 0: close to GND Logic level 1: open
  • 2 Open collector to 30V, 30 mA max. load
  • 4 differential 0~10 V 0~20 mA, 4~20mA Thermistor 3k, 10k RTD (Pt100, 1000)
  • 2 0~10 V 0~20 mA, 4~20mA
  • 12-bit
  • 10 samples/second (total)
  • ASCII command
  • Serial: From 1,200 to 115.2 k
  • Serial: 1.2 km
  • N/A

Analog I/O Modules

Power Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input

4-ch Analog Output Module with Modbus

• 12-bit resolution
• Software configurable for mA or V output in individual channels
• 4 digital inputs for latch output
• 3000 VDC D/A to Logic isolation
• Programmable output slope: 0.125 - 128.0 mA/sec. 0.0625 - 64 V/sec.

Specifications

Display LED Indicators Power
Power Supply Power Requirement 10~30 VDC
Analog Output Channels 4
Voltage Range ±10 V
Current Output 0~20 mA, 4~20mA
General Watchdog Timer System (1.6 second) & Communication
Connector 2 x plug-in terminal block (#14~28 AWG)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 5~95 %RH
Temperature (Storage) -25~85 °C (-13~185 °F)
Interface RS-485
Isolation Protection 3000 VDC
Communication Protocol ASCII command & Modbus/RTU
Communication Speed Serial: From 1,200 to 115.2 k
Comm. Distance Serial: 1.2 km
Data Flow Control Yes
Digital Input Channles 4
Input Voltage Logic level

Downloads

 

Datasheets

ADAM-4024T Datasheet

  • 10~30 VDC
  • 4 Logic level 0: 1 VDC max. Logic level 1: 10~30 VDC
  • N/A
  • N/A
  • 4 0~10 V 0~20 mA, 4~20mA
  • 12-bit
  • N/A
  • ASCII command
  • Serial: From 1,200 to 115.2 k
  • Serial: 1.2 km
  • N/A

Digital I/O Modules

Power Supply
Digital Input
Digital Output
Data Flow Control
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input

15-ch Digital I/O Module

• 7 input channels, 8 output channels
• Watchdog Timer

Specifications

Display LED Indicators Power
Power Supply Power Requirement 10~30 VDC
General Watchdog Timer System (1.6 second)
Connector 2 x plug-in terminal block (#14~22 AWG)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 5~95 %RH
Temperature (Storage) -25~85 °C (-13~185 °F)
Interface RS-485
Communication Protocol ASCII command
Communication Speed Serial: From 1,200 to 115.2 k
Comm. Distance Serial: 1.2 km
Data Flow Control Yes
Digital Input Channles 7
Input Voltage Logic level 0: 1 VDC max. Logic level 1: 3.5~30 VDC
Digital Output Channels 8 Open collector to 30V, 30 mA max. load
Power Dissipation 300 mW

Downloads

 

Datasheets

ADAM-4050 Datasheet

  • 10~30 VDC
  • 7 Logic level 0: 1 VDC max. Logic level 1: 3.5~30 VDC
  • 8 Open collector to 30V, 30 mA max. load
  • Yes
  • 2 x plug-in terminal block (#14~22 AWG)
  • ASCII command
  • Serial: From 1,200 to 115.2 k
  • Serial: 1.2 km
  • N/A

Digital I/O Modules

Power Supply
Digital Input
Digital Output
Data Flow Control
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input

16-ch Isolated Digital Input Module with Modbus

• 16 digital input channels
• Digital input for dry contact or wet contact
• Input Voltage level: 10~50V
• Over voltage protection: 70 Vdc
• 2,500 Vdc optical isolation

Specifications

Display LED Indicators Power, DI
Power Supply Power Requirement 10~30 VDC
General Watchdog Timer System (1.6 second)
Connector 2 x plug-in terminal block (#14~28 AWG)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 5~95 %RH
Temperature (Storage) -25~85 °C (-13~185 °F)
Interface RS-485
Isolation Protection 2,500 VDC
Communication Protocol ASCII command & Modbus/RTU
Communication Speed Serial: From 1,200 to 115.2 k
Comm. Distance Serial: 1.2 km
Data Flow Control Yes
Digital Input Channles 16
Input Voltage Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 3 VDC max. Logic level 1: 10~50 VDC

Downloads

 

Datasheets

ADAM-4051 Datasheet

  • 10~30 VDC
  • 16 Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 3 VDC max. Logic level 1: 10~50 VDC
  • N/A
  • Yes
  • 2 x plug-in terminal block (#14~22 AWG)
  • ASCII command & Modbus/RTU
  • Serial: From 1,200 to 115.2 k
  • Serial: 1.2 km
  • N/A

Digital I/O Modules

Power Supply
Digital Input
Digital Output
Data Flow Control
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input

8-ch Isolated Digital Input Module

• Six fully independent isolated channels
• Two isolated channels with common ground
• Isolation voltage: 5000 V RMS

Specifications

Display LED Indicators Power
Power Supply Power Requirement 10~30 VDC
General Watchdog Timer System (1.6 second)
Connector 2 x plug-in terminal block (#14~22 AWG)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 5~95 %RH
Temperature (Storage) -25~85 °C (-13~185 °F)
Interface RS-485
Isolation Protection 5,000 VRMS
Communication Protocol ASCII command
Communication Speed Serial: From 1,200 to 115.2 k
Comm. Distance Serial: 1.2 km
Data Flow Control Yes
Digital Input Channles 8
Input Voltage Logic level 0: 1 VDC max. Logic level 1: 3~30 VDC

Downloads

 

Datasheets

ADAM-4052 Datasheet

  • 10~30 VDC
  • 8 Logic level 0: 1 VDC max. Logic level 1: 3~30 VDC
  • N/A
  • Yes
  • 2 x plug-in terminal block (#14~22 AWG)
  • ASCII command
  • Serial: From 1,200 to 115.2 k
  • Serial: 1.2 km
  • N/A

Digital I/O Modules

Power Supply
Digital Input
Digital Output
Data Flow Control
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input

16-ch Digital Input Module

• 16 input channels
• Watchdog Timer


Specifications

Display LED Indicators Power
Power Supply Power Requirement 10~30 VDC
General Watchdog Timer System (1.6 second)
Connector 2 x plug-in terminal block (#14~22 AWG)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 5~95 %RH
Temperature (Storage) -25~85 °C (-13~185 °F)
Interface RS-485
Communication Protocol ASCII command
Communication Speed Serial: From 1,200 to 115.2 k
Comm. Distance Serial: 1.2 km
Data Flow Control Yes
Digital Input Channles 16
Input Voltage Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 2 VDC max. Logic level 1: 4~30 VDC

Downloads

 

Datasheets

ADAM-4053 Datasheet

  • 10~30 VDC
  • 16 Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 2 VDC max. Logic level 1: 4~30 VDC
  • N/A
  • Yes
  • 2 x plug-in terminal block (#14~22 AWG)
  • ASCII command
  • Serial: From 1,200 to 115.2 k
  • Serial: 1.2 km
  • N/A

Digital I/O Modules

Power Supply
Digital Input
Digital Output
Data Flow Control
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input

16-ch Isolated Digital I/O Module with Modbus

• I/O type: 8 DO/DI
• Input Voltage level: 10~50 VDC
• Open Collector to 40 VDC
• Over voltage protection: 70 VDC
• 2,500 VDC optical isolation

Specifications

Display LED Indicators Power, DIO
Power Supply Power Requirement 10~30 VDC
General Watchdog Timer System (1.6 second) & Communication
Connector 2 x plug-in terminal block (#14~28 AWG)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 5~95 %RH
Temperature (Storage) -25~85 °C (-13~185 °F)
Interface RS-485
Isolation Protection 2,500 VDC
Communication Protocol ASCII command & Modbus/RTU
Communication Speed Serial: From 1,200 to 115.2 k
Comm. Distance Serial: 1.2 km
Data Flow Control Yes
Digital Input Channles 8
Digital Output Channels 8 Open collector to 40V, 200 mA max. load
Power Dissipation Chanel: 1 W max Total: 2.2 W (8 Channels)

Downloads

 

Datasheets

ADAM-4055 Datasheet

  • 10~30 VDC
  • 16
  • 8 Open collector to 40V, 200 mA max. load Chanel: 1 W max Total: 2.2 W (8 Channels)
  • Yes
  • 2 x plug-in terminal block (#14~28 AWG)
  • ASCII command & Modbus/RTU
  • Serial: From 1,200 to 115.2 k
  • Serial: 1.2 km
  • N/A

Digital I/O Modules

Power Supply
Digital Input
Digital Output
Data Flow Control
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input

12-ch Sink Type Isolated Digital Output Module with Modbus

• Sink Type: Digital Output
• Digital Output: Open collector to 40V (200 mA max. load)
• 12 Channels
• I/O Type: Sink Type Output

Specifications

Display LED Indicators Power, DO
Power Supply Power Requirement 10~30 VDC
General Watchdog Timer System (1.6 second) & Communication
Connector 2 x plug-in terminal block (#14~22 AWG)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 5~95 %RH
Temperature (Storage) -25~85 °C (-13~185 °F)
Interface RS-485
Isolation Protection 5,000 VDC
Communication Protocol ASCII command & Modbus/RTU
Communication Speed Serial: From 1,200 to 115.2 k
Comm. Distance Serial: 1.2 km
Data Flow Control Yes
Digital Output Channels 12 (Sink type) Open collector to 40V, 200 mA max. load
Power Dissipation Chanel: 1 W max Total: 2.2 W (8 Channels)

Downloads

 

Datasheets

ADAM-4056S Datasheet

  • 10~30 VDC
  • N/A
  • 12 (Sink type) Open collector to 40V, 200 mA max. load Chanel: 1 W max Total: 2.2 W (8 Channels)
  • Yes
  • 2 x plug-in terminal block (#14~22 AWG)
  • ASCII command & Modbus/RTU
  • Serial: From 1,200 to 115.2 k
  • Serial: 1.2 km
  • N/A

Digital I/O Modules

Power Supply
Digital Input
Digital Output
Data Flow Control
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input

12-ch Source Type Isolated Digital Output Module with Modbus

• DO Source Power Failure Detection
• I/O Type: Source Type Output
• 12 Channels
• Digital Output: VCC: 1-~35 Vdc, Current: 1A (per ch.)
• Over Current Detection

Specifications

Display LED Indicators Power, DO
Power Supply Power Requirement 10~30 VDC
General Watchdog Timer System (1.6 second) & Communication
Connector 2 x plug-in terminal block (#14~22 AWG)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 5~95 %RH
Temperature (Storage) -25~85 °C (-13~185 °F)
Interface RS-485
Isolation Protection 5,000 VDC
Communication Protocol ASCII command & Modbus/RTU
Communication Speed Serial: From 1,200 to 115.2 k
Comm. Distance Serial: 1.2 km
Data Flow Control Yes
Digital Output Channels 12 (Source type) VCC: 10~35 VDC, Current: 1 A (per channel) Over current detection and protection

Downloads

 

Datasheets

ADAM-4056SO Datasheet

  • 10~30 VDC
  • N/A
  • 12 (Source type) VCC: 10~35 VDC, Current: 1 A (per channel) Over current detection and protection
  • Yes
  • 2 x plug-in terminal block (#14~22 AWG)
  • ASCII command & Modbus/RTU
  • Serial: From 1,200 to 115.2 k
  • Serial: 1.2 km
  • N/A

Digital I/O Modules

Power Supply
Digital Input
Digital Output
Data Flow Control
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input

4-ch Relay Output Module

• 4-channels relay, two Form A and two Form C
• Breakdown voltage: 500 VAC (50/60 Hz)
• Insulation resistance: 1000 M ohms minimum at 500 V DC

Specifications

Display LED Indicators Power
Power Supply Power Requirement 10~30 VDC
General Watchdog Timer System (1.6 second)
Connector 2 x plug-in terminal block (#14~22 AWG)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 5~95 %RH
Temperature (Storage) -25~85 °C (-13~185 °F)
Interface RS-485
Isolation Protection Breakdown voltage: 500 VAC (50/60 Hz)
Communication Protocol ASCII command
Communication Speed Serial: From 1,200 to 115.2 k
Comm. Distance Serial: 1.2 km
Data Flow Control Yes
Digital Output Channels 4-ch relay

Downloads

 

Datasheets

ADAM-4060 Datasheet

  • 10~30 VDC
  • N/A
  • 4-ch relay
  • Yes
  • 2 x plug-in terminal block (#14~22 AWG)
  • ASCII command
  • Serial: From 1,200 to 115.2 k
  • Serial: 1.2 km
  • N/A

Digital I/O Modules

Power Supply
Digital Input
Digital Output
Data Flow Control
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input

8-ch Relay Output Module with Modbus

• I/O type: 8 channels from C (NO/NC selectable)
• Contact rating: AC: 125 V @ 0.6 A; 250 V @ 0.3 A, DC: 30 V @ 2 A; 110 V @ 0.6 A
• Switch Time: Relay on time (typical): 3 msec, relay off time (typical): 1 msec.
• LED Indicators
• Supports Modbus/RTU protocol

Specifications

Display LED Indicators Power, Relay
Power Supply Power Requirement 10~30 VDC
General Watchdog Timer System (1.6 second) & Communication
Connector 2 x plug-in terminal block (#14~28 AWG)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 5~95 %RH
Temperature (Storage) -25~85 °C (-13~185 °F)
Interface RS-485
Isolation Protection Breakdown voltage: 500 VAC (50/60 Hz)
Communication Protocol ASCII command & Modbus/RTU
Communication Speed Serial: From 1,200 to 115.2 k
Comm. Distance Serial: 1.2 km
Data Flow Control Yes
Digital Output Channels 8-ch relay

Downloads

 

Datasheets

ADAM-4068 Datasheet

  • 10~30 VDC
  • N/A
  • 8-ch relay
  • Yes
  • 2 x plug-in terminal block (#14~28 AWG)
  • ASCII command & Modbus/RTU
  • Serial: From 1,200 to 115.2 k
  • Serial: 1.2 km
  • N/A

Digital I/O Modules

Power Supply
Digital Input
Digital Output
Data Flow Control
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input

8-ch Power Relay Output Module with Modbus

• High Power Relay Output : 240Vac@5A, 30Vdc@5A
• 8-channel Relay Output
• 4 form A channels and 4 form C channels
• Supports Modbus/RTU protocol and ADAM ASCII commands

Specifications

Display LED Indicators Power
Power Supply Power Requirement 10~30 VDC
General Watchdog Timer System (1.6 second) & Communication
Connector 2 x plug-in terminal block (#14~28 AWG)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 5~95 %RH
Temperature (Storage) -25~85 °C (-13~185 °F)
Interface RS-485
Isolation Protection Breakdown voltage: 1000 VAC (50/60 Hz)
Communication Protocol ASCII command & Modbus/RTU
Communication Speed Serial: From 1,200 to 115.2 k
Comm. Distance Serial: 1.2 km
Data Flow Control Yes
Digital Output Channels 8-ch power relay

Downloads

 

Datasheets

ADAM-4069 Datasheet

  • 10~30 VDC
  • N/A
  • 8-ch power relay
  • Yes
  • 2 x plug-in terminal block (#14~28 AWG)
  • ASCII command & Modbus/RTU
  • Serial: From 1,200 to 115.2 k
  • Serial: 1.2 km
  • N/A

Analog I/O Modules

Power Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input

7-ch Isolated RTD Input Modbus TCP Module


• I/O Type: 7 RTD
• 10/100Based-T Ethernet
• Supports multi-channel/multi-range
• Pt 100/1000, Ni, Balco 500
• Wiring burn-out detect function

Specifications

Display LED Indicators Status, Comm, Link, Speed
Power Supply Power Requirement 10~30 VDC
Analog Input Channels 7 (2 or 3-wired)
Direct Sensor Input RTD (Pt, Balco, or Ni)
Burn-out Detection Yes
Channel Independent Configuration Yes
Sampling Rates 10 samples/second
Resolution 16-bit
Input Impedance >10 MOhm
Span Drift ±25 ppm/°C
Zero Drift ±6 µV/°C
CMR @ 50/60 Hz 90 dB
NMR @ 50/60 Hz 60 dB
General Watchdog Timer System (1.6 second) & Communication (programmable)
Connector 1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 20~95 %RH
Temperature (Storage) -20~80 °C (-4~176 °F)
Interface 10/100Base-T(X)
Peer-to-Peer Yes
GCL Yes
Isolation Protection 2000 VDC
Communication Protocol Modbus/TCP, TCP/IP, UDP, and HTTP
Communication Speed Ethernet: 10/100Mbps
Comm. Distance Ethernet: 100 m

Downloads

 

Datasheets

ADAM-6015 Datasheet

  • 10~30 VDC
  • N/A
  • N/A
  • 7 (2 or 3-wired)
  • N/A
  • 16-bit
  • 10 samples/second
  • Modbus/TCP, TCP/IP, UDP, and HTTP
  • Ethernet: 10/100Mbps
  • Ethernet: 100 m
  • N/A

Digital I/O Modules

Power Supply
Digital Input
Digital Output
Data Flow Control
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input

2-ch Counter/Frequency Module

• 2 digital outputs or high/low alarms
• 8-channel Relay Output2 independent 32-bit counters
• 2500 VRMS isolation
• Counter preset selection

Specifications

Display LED Indicators Power
Power Supply Power Requirement 10~30 VDC
Digital I/O Frequency Input 2 independent counters (32-bit + 1-bit overflow, 5~50kHz)
General Watchdog Timer System (1.6 second)
Connector 2 x plug-in terminal block (#14~22 AWG)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 5~95 %RH
Temperature (Storage) -25~85 °C (-13~185 °F)
Interface RS-485
Isolation Protection 2,500 VRMS
Communication Protocol ASCII command
Communication Speed Serial: From 1,200 to 115.2 k
Comm. Distance Serial: 1.2 km
Data Flow Control Yes
Digital Output Channels 2 Open collector to 30V, 30 mA max. load
Power Dissipation 300 mW for each channel

Downloads

 

Datasheets

ADAM-4080 Datasheet

  • 10~30 VDC
  • N/A
  • 2 Open collector to 30V, 30 mA max. load 300 mW for each channel
  • Yes
  • 2 x plug-in terminal block (#14~22 AWG)
  • ASCII command
  • Serial: From 1,200 to 115.2 k
  • Serial: 1.2 km
  • 2 independent counters (32-bit + 1-bit overflow, 5~50kHz)

Analog I/O Modules

Power Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input

8-ch Isolated Thermocouple Input Modbus TCP Module with 8-ch DO


• I/O Type: 8 T/C & 8 DO
• 10/100Based-T Ethernet
• Supports multi-channel/multi-range
• Provides default/customized web page
• 2,500 VDC optical isolation


Specifications

Display LED Indicators Status, Comm, Link, Speed
Power Supply Power Requirement 10~30 VDC
Analog Input Channels 8 differential
Direct Sensor Input J, K, T, E, R, S, B Thermocouple
Burn-out Detection Yes
Channel Independent Configuration Yes
Sampling Rates 10 samples/second
Resolution 16-bit
Input Impedance >10 MOhm
Span Drift ±25 ppm/°C
Zero Drift ±6 µV/°C
CMR @ 50/60 Hz 90 dB
NMR @ 50/60 Hz 60 dB
General Watchdog Timer System (1.6 second) & Communication (programmable)
Connector 1 x RJ-45 (LAN) & 1 x plug-in terminal block (DO and power) & 1 x 20-pin connector to daughterboard (TC)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 20~95 %RH
Temperature (Storage) -20~80 °C (-4~176 °F)
Interface 10/100Base-T(X)
Peer-to-Peer Yes
GCL Yes
Isolation Protection 2000 VDC
Communication Protocol Modbus/TCP, TCP/IP, UDP, and HTTP
Communication Speed Ethernet: 10/100Mbps
Comm. Distance Ethernet: 100 m
Digital Output Channels 8 Open collector to 30V, 100 mA max. load
Power Dissipation 300 mW for each module

Downloads

 

Datasheets

ADAM-6018 Datasheet

  • 10~30 VDC
  • N/A
  • 8 Open collector to 30V, 100 mA max. load 300 mW for each module
  • 8 differential
  • N/A
  • 16-bit
  • 10 samples/second
  • Modbus/TCP, TCP/IP, UDP, and HTTP
  • Ethernet: 10/100Mbps
  • Ethernet: 100 m
  • N/A

Analog I/O Modules

Power Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input

12-ch Isolated Universal Input/Output Modbus TCP Module


• 6 differential channels
• 16-bit effective resolution
• Isolation Voltage: 2,000 VDC
• Provides default/customized web pageSampling Rate: 10 samples/sec


Specifications

Display LED Indicators Status, Comm, Link, Speed
Power Supply Power Requirement 10~30 VDC
Analog Input Channels 6 differential
Voltage Range ±10 V
Current Input 0~20 mA 4~20 mA
Channel Independent Configuration Yes
Sampling Rates 10 samples/second
Resolution 16-bit
Input Impedance 20 MOhm
Span Drift ±25 ppm/°C
Zero Drift ±6 µV/°C
CMR @ 50/60 Hz 90 dB
NMR @ 50/60 Hz 60 dB
Analog Output Channels 2
Voltage Range 0~10 V
Current Output 0~20 mA 4~20 mA
General Watchdog Timer System (1.6 second) & Communication (programmable)
Connector 1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 20~95 %RH
Temperature (Storage) -20~80 °C (-4~176 °F)
Interface 10/100Base-T(X)
Peer-to-Peer Receiver Only
GCL Receiver Only
Isolation Protection 2000 VDC
Communication Protocol Modbus/TCP, TCP/IP, UDP, and HTTP
Communication Speed Ethernet: 10/100Mbps
Comm. Distance Ethernet: 100 m
Digital Input Channels 2
Input Voltage Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
Digital Output Channels 2 Open collector to 30V, 100 mA max. load
Power Dissipation 300 mW for each module

Downloads

 

Datasheets

ADAM-6024 Datasheet

  • 10~30 VDC
  • 2 Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
  • 2 Open collector to 30V, 100 mA max. load 300 mW for each module
  • 6 differential
  • 2 0~10 V
  • 16-bit
  • 10 samples/second
  • Modbus/TCP, TCP/IP, UDP, and HTTP
  • Ethernet: 10/100Mbps
  • Ethernet: 100 m
  • N/A

Digital I/O Modules

Power Supply
Digital Input
Digital Output
Peer-to-Peer
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input

18-ch Isolated Digital I/O Modbus TCP Module


• 12-ch DI, 6-ch DO, Ethernet-based smart I/O
• Remote monitoring and control with mobile devices
• Group configuration capability for multiple module setup
• Flexible user-defined Modbus address

Specifications

General Description 18-ch Isolated Digital I/O Modbus TCP Module
Display LED Indicators Status, Comm, Link, Speed
Power Supply Power Requirement 10~30 VDC
General Watchdog Timer System (1.6 second) & Communication (programmable)
Connector 1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power)
Temperature (Operating) -20 ~ 70°C (-4 ~ 158°F)
Humidity 20~95 %RH
Temperature (Storage) -30 ~ 80°C (-22 ~ 176°F)
Interface 10/100Base-T(X)
Peer-to-Peer Yes
GCL Yes
Isolation Protection 2000 VDC
Communication Protocol Modbus/TCP, TCP/IP, UDP, and HTTP
Communication Speed Ethernet: 10/100Mbps
Comm. Distance Ethernet: 100 m
Digital Input Channels 12
Input Voltage Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 3 VDC max. Logic level 1: 10~30 VDC
Digital Output Channels 6 (Sink type) Open collector to 30V, 100 mA max. load Support 5 kHz pulse output

Downloads

 

Datasheets

ADAM-6050 Datasheet

  • 10~30 VDC
  • 12 Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 3 VDC max. Logic level 1: 10~30 VDC
  • Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 3 VDC max. Logic level 1: 10~30 VDC
  • YES
  • 1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power)
  • Modbus/TCP, TCP/IP, UDP, and HTTP
  • Ethernet: 10/100Mbps
  • Ethernet: 100 m
  • N/A

Digital I/O Modules

Power Supply
Digital Input
Digital Output
Peer-to-Peer
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input

14-ch Isolated Digital I/O Modbus TCP Module with 2-ch Counter


• 12-ch DI, 2-ch DO, 2-ch counter, Ethernet-based smart I/O
• Remote monitoring and control with mobile devicesRemote monitoring and control with mobile devices
• Group configuration capability for multiple module setup
• Flexible user-defined Modbus addressFlexible user-defined Modbus address

Specifications

Display LED Indicators Status, Comm, Link, Speed
Power Supply Power Requirement 10~30 VDC
Digital I/O Frequency Input 2 independent counters (32-bit + 1-bit overflow, 0~4.5kHz) DI counters (32-bit + 1-bit overflow, 3kHz max.)
General Watchdog Timer System (1.6 second) & Communication (programmable)
Connector 1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power)
Temperature (Operating) -20 ~ 70°C (-4 ~ 158°F)
Humidity 20~95 %RH
Temperature (Storage) -30 ~ 80°C (-22 ~ 176°F)
Interface 10/100Base-T(X)
Peer-to-Peer Yes
GCL Yes
Isolation Protection 2000 VDC
Communication Protocol Modbus/TCP, TCP/IP, UDP, and HTTP
Communication Speed Ethernet: 10/100Mbps
Comm. Distance Ethernet: 100 m
Digital Input Channels 12
Input Voltage Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
Digital Output Channels 2 (Sink type) Open collector to 30V, 100 mA max. load Support 5 kHz pulse output

Downloads

 

Datasheets

ADAM-6051 Datasheet

  • 10~30 VDC
  • 12 Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
  • 2 (Sink type) Open collector to 30V, 100 mA max. load Support 5 kHz pulse output
  • YES
  • 1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power)
  • Modbus/TCP, TCP/IP, UDP, and HTTP
  • Ethernet: 10/100Mbps
  • Ethernet: 100 m
  • 2 independent counters (32-bit + 1-bit overflow, 0~4.5kHz) DI counters (32-bit + 1-bit overflow, 3kHz max.)

Digital I/O Modules

Power Supply
Digital Input
Digital Output
Peer-to-Peer
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input

16-ch Source-type Isolated Digital I/O Modbus TCP Module


• 8-ch DI, 8-ch DO, Ethernet-based smart I/O
• Remote monitoring and control with mobile devices
• Remote monitoring and control with mobile devices
• Flexible user-defined Modbus address
• Intelligent control ability by Peer-to-Peer and GCL function
• Active I/O message by data stream or event trigger function
• Multiple protocol support: Modbus TCP, TCP/IP, UDP, HTTP, DHCP
• Web language support: XML, HTML 5, Java Script

Specifications

Display LED Indicators Status, Comm, Link, Speed
Power Supply Power Requirement 10~30 VDC
Digital I/O Frequency Input DI counters (32-bit + 1-bit overflow, 3kHz max.)
General Watchdog Timer System (1.6 second) & Communication (programmable)
Connector 1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power)
Temperature (Operating) -20 ~ 70°C (-4 ~ 158°F)
Humidity 20~95 %RH
Temperature (Storage) -30 ~ 80°C (-22 ~ 176°F)
Interface 10/100Base-T(X)
Peer-to-Peer Yes
GCL Yes
Isolation Protection 2000 VDC
Communication Protocol Modbus/TCP, TCP/IP, UDP, and HTTP
Communication Speed Ethernet: 10/100Mbps
Comm. Distance Ethernet: 100 m
Digital Input Channels 8
Input Voltage Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
Digital Output Channels 8 (Source type) 10~35 VDC, 1 A per ch. Support 5 kHz pulse outpu

Downloads

 

Datasheets

ADAM-6052 Datasheet

  • 10~30 VDC
  • 8 Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
  • 8 (Source type) 10~35 VDC, 1 A per ch. Support 5 kHz pulse output
  • YES
  • 1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power)
  • Modbus/TCP, TCP/IP, UDP, and HTTP
  • Ethernet: 10/100Mbps
  • Ethernet: 100 m
  • DI counters (32-bit + 1-bit overflow, 3kHz max.)

Digital I/O Modules

Power Supply
Digital Input
Digital Output
Peer-to-Peer
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input

6-ch Digital Input and 6-ch Relay Modbus TCP Module


• 6-ch DI, 6-ch RL, Ethernet-based smart I/O
• Remote monitoring and control with mobile devices
• Group configuration capability for multiple module setup
• Flexible user-defined Modbus address
• Intelligent control ability by Peer-to-Peer and GCL function
• Active I/O message by data stream or event trigger function
• Multiple protocol support: Modbus TCP, TCP/IP, UDP, HTTP, DHCP
• Web language support: XML, HTML 5, Java Script

Specifications

Display LED Indicators Status, Comm, Link, Speed
Power Supply Power Requirement 10~30 VDC
Digital I/O Frequency Input DI counters (32-bit + 1-bit overflow, 3kHz max.)
General Watchdog Timer System (1.6 second) & Communication (programmable)
Connector 1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power)
Temperature (Operating) -20 ~ 70°C (-4 ~ 158°F)
Humidity 20~95 %RH
Temperature (Storage) -30 ~ 80°C (-22 ~ 176°F)
Interface 10/100Base-T(X)
Peer-to-Peer Yes
GCL Yes
Isolation Protection 2000 VDC
Communication Protocol Modbus/TCP, TCP/IP, UDP, and HTTP
Communication Speed Ethernet: 10/100Mbps
Comm. Distance Ethernet: 100 m
Digital Input Channels 6
Input Voltage Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
Digital Output Channels 6-ch relay Support pulse output

Downloads

 

Datasheets

ADAM-6060 Datasheet

  • 10~30 VDC
  • 6 Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
  • 6-ch relay Support pulse output
  • YES
  • 1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power)
  • Modbus/TCP, TCP/IP, UDP, and HTTP
  • Ethernet: 10/100Mbps
  • Ethernet: 100 m
  • DI counters (32-bit + 1-bit overflow, 3kHz max.)

Digital I/O Modules

Power Supply
Digital Input
Digital Output
Peer-to-Peer
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input

6-ch Digital Input and 6-ch Power Relay Modbus TCP Module


• 6-ch DI, 6-ch RL, Ethernet-based smart I/O
• Remote monitoring and control with mobile devices
• Group configuration capability for multiple module setup
• Flexible user-defined Modbus address
• Intelligent control ability by Peer-to-Peer and GCL function
• Active I/O message by data stream or event trigger function
• Multiple protocol support: Modbus TCP, TCP/IP, UDP, HTTP, DHCP
• Web language support: XML, HTML 5, Java Script

Specifications

Display LED Indicators Status, Comm, Link, Speed
Power Supply Power Requirement 10~30 VDC
Digital I/O Frequency Input DI counters (32-bit + 1-bit overflow, 3kHz max.)
General Watchdog Timer System (1.6 second) & Communication (programmable)
Connector 1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power)
Temperature (Operating) -20 ~ 70°C (-4 ~ 158°F)
Humidity 20~95 %RH
Temperature (Storage) -30 ~ 80°C (-22 ~ 176°F)
Interface 10/100Base-T(X)
Peer-to-Peer Yes
GCL Yes
Isolation Protection 2000 VDC
Communication Protocol Modbus/TCP, TCP/IP, UDP, and HTTP
Communication Speed Ethernet: 10/100Mbps
Comm. Distance Ethernet: 100 m
Digital Input Channels 6
Input Voltage Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
Digital Output Channels 6-ch power relay Support pulse output

Downloads

 

Datasheets

ADAM-6066 Datasheet

  • 10~30 VDC
  • 6 Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
  • 6-ch power relay Support pulse output
  • YES
  • 1 x RJ-45 (LAN) & 2 x plug-in terminal block (I/O and power)
  • Modbus/TCP, TCP/IP, UDP, and HTTP
  • Ethernet: 10/100Mbps
  • Ethernet: 100 m
  • DI counters (32-bit + 1-bit overflow, 3kHz max.)

Analog I/O Modules

Power Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input

8-ch Isolated Analog Input EtherNet/IP Module


• EtherNet/IP protocol
• High common mode voltage 200 VDC
• Isolation Protection: 2,500 VDC
• 2 x RJ-45 LAN (daisy chain)


Specifications

Display LED Indicators Status, Comm, Link, Speed
Power Supply Power Requirement 10~30 VDC
Analog Input Channels 8 differential
Voltage Range ±150 mV ±500 mV ±1 V ±5 V ±10 V
Current Input ±20 mA 0~ 20 mA 4~20 mA
Channel Independent Configuration Yes
Sampling Rates 12 sample/second (total)
Resolution 16-bit
Input Impedance Voltage: >10 MOhm Current: 120 Ohm
Span Drift ± 30 ppm/°C
Zero Drift ± 6 µV/° C
CMR @ 50/60 Hz 92 dB
NMR @ 50/60 Hz 60 dB
High Common Mode 200 VDC
General Watchdog Timer System (1.6 second) & Communication (programmable)
Connector 2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 20~95 %RH
Temperature (Storage) -20~80 °C (-4~176 °F)
Interface 10/100Base-T(X)
Peer-to-Peer No
GCL No
Isolation Protection 2500 VDC
Communication Protocol EtherNet/IP
Communication Speed Ethernet: 10/100Mbps
Comm. Distance Ethernet: 100 m

Downloads

 

Datasheets

ADAM-6117EI Datasheet

  • 10~30 VDC
  • N/A
  • N/A
  • 8 differential ±150 mV ±500 mV ±1 V ±5 V ±10 V
  • N/A
  • 16-bit
  • 12 sample/second (total)
  • EtherNet/IP
  • Ethernet: 10/100Mbps
  • Ethernet: 100 m
  • C

Digital I/O Modules

Power Supply
Digital Input
Digital Output
Peer-to-Peer
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input

15-ch Isolated Digital I/O EtherNet/IP Module


• EtherNet/IP protocol
• 8-ch digital input and 7-ch digital output (sink)
• Normal output current: 0.1 A (per channel)
• 2 x RJ-45 LAN (daisy chain)


Specifications

Display LED Indicators Status, Comm, Link, Speed
Power Supply Power Requirement 10~30 VDC
General Watchdog Timer System (1.6 second) & Communication (programmable)
Connector 2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 20~95 %RH
Temperature (Storage) -20~80 °C (-4~176 °F)
Interface 10/100Base-T(X)
Peer-to-Peer No
GCL No
Isolation Protection 2500 VDC
Communication Protocol EtherNet/IP
Communication Speed Ethernet: 10/100Mbps
Comm. Distance Ethernet: 100 m
Digital Input Channles 8
Input Voltage Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
Digital Output Channels 7 (Sink type) 8~35V, 100 mA per channel

Downloads

 

Datasheets

ADAM-6150EI Datasheet

  • 10~30 VDC
  • 8 Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
  • 7 (Sink type) 8~35V, 100 mA per channel
  • NO
  • 2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
  • EtherNet/IP
  • Ethernet: 10/100Mbps
  • Ethernet: 100 m
  • N/A

Digital I/O Modules

Power Supply
Digital Input
Digital Output
Peer-to-Peer
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input

16-ch Isolated Digital Input EtherNet/IP Module


• EtherNet/IP protocol
• 16-ch digital input
• Normal output current: 0.1 A (per channel)
• 2 x RJ-45 LAN (daisy chain)


Specifications

Display LED Indicators Status, Comm, Link, Speed
Power Supply Power Requirement 10~30 VDC
General Watchdog Timer System (1.6 second) & Communication (programmable)
Connector 2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 20~95 %RH
Temperature (Storage) -20~80 °C (-4~176 °F)
Interface 10/100Base-T(X)
Peer-to-Peer No
GCL No
Isolation Protection 2500 VDC
Communication Protocol EtherNet/IP
Communication Speed Ethernet: 10/100Mbps
Comm. Distance Ethernet: 100 m
Digital Input Channles 16
Input Voltage Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC

Downloads

 

Datasheets

ADAM-6151EI Datasheet

  • 10~30 VDC
  • 16 Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
  • N/A
  • NO
  • 2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
  • EtherNet/IP
  • Ethernet: 10/100Mbps
  • Ethernet: 100 m
  • N/A

Digital I/O Modules

Power Supply
Digital Input
Digital Output
Peer-to-Peer
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input

16-ch Isolated Digital Output EtherNet/IP Module


• EtherNet/IP protocol
• 16-ch digital output
• Normal output current: 0.1 A (per channel)
• 2 x RJ-45 LAN (daisy chain)


Specifications

Display LED Indicators Status, Comm, Link, Speed
Power Supply Power Requirement 10~30 VDC
General Watchdog Timer System (1.6 second) & Communication (programmable)
Connector 2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 20~95 %RH
Temperature (Storage) -20~80 °C (-4~176 °F)
Interface 10/100Base-T(X)
Peer-to-Peer No
GCL No
Isolation Protection 2500 VDC
Communication Protocol EtherNet/IP
Communication Speed Ethernet: 10/100Mbps
Comm. Distance Ethernet: 100 m
Digital Output Channels 16 (Sink type) 8~35V, 100 mA per channel

Downloads

 

Datasheets

ADAM-6156EI Datasheet

  • 10~30 VDC
  • N/A
  • 16 (Sink type) 8~35V, 100 mA per channel
  • NO
  • 2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
  • EtherNet/IP
  • Ethernet: 10/100Mbps
  • Ethernet: 100 m
  • N/A

Digital I/O Modules

Power Supply
Digital Input
Digital Output
Peer-to-Peer
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input

6-ch Relay Output EtherNet/IP Module


• EtherNet/IP protocol
• 5 Form C and 1 Form A/B relay output
• Breakdown voltage: 500 VAC (50/60 Hz)
• 2 x RJ-45 LAN (daisy chain)
• Contact Rating: 5 A @ 250 VAC; 5 A @ 30 VDC


Specifications

Display LED Indicators Status, Comm, Link, Speed
Power Supply Power Requirement 10~30 VDC
General Watchdog Timer System (1.6 second) & Communication (programmable)
Connector 2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 20~95 %RH
Temperature (Storage) -20~80 °C (-4~176 °F)
Interface 10/100Base-T(X)
Peer-to-Peer No
GCL No
Isolation Protection 2500 VDC
Communication Protocol EtherNet/IP
Communication Speed Ethernet: 10/100Mbps
Comm. Distance Ethernet: 100 m
Digital Output Channels 5 Form C 1 Form A

Downloads

 

Datasheets

ADAM-6160EI Datasheet

  • 10~30 VDC
  • N/A
  • 5 Form C 1 Form A
  • NO
  • 2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
  • EtherNet/IP
  • Ethernet: 10/100Mbps
  • Ethernet: 100 m
  • N/A

Analog I/O Modules

Power Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input

8-ch Isolated Analog Input PROFINET Module


• PROFINET protocol
• High common mode voltage 200 VDC
• Isolation Protection: 2,500 VDC
• 2 x RJ-45 LAN (daisy chain)


Specifications

Display LED Indicators Status, Comm, Link, Speed
Power Supply Power Requirement 10~30 VDC
Analog Input Channels 8 differential
Voltage Range ±150 mV ±500 mV ±1 V ±5 V ±10 V
Current Input ±20 mA 0~ 20 mA 4~20 mA
Channel Independent Configuration Yes
Sampling Rates 12 sample/second (total)
Resolution 16-bit
Input Impedance Voltage: >10 MOhm Current: 120 Ohm
Span Drift ± 30 ppm/°C
Zero Drift ± 6 µV/° C
CMR @ 50/60 Hz 92 dB
NMR @ 50/60 Hz 60 dB
High Common Mode 200 VDC
General Watchdog Timer System (1.6 second) & Communication (programmable)
Connector 2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 20~95 %RH
Temperature (Storage) -20~80 °C (-4~176 °F)
Interface 10/100Base-T(X)
Peer-to-Peer No
GCL No
Isolation Protection 2500 VDC
Communication Protocol PROFINET
Communication Speed Ethernet: 10/100Mbps
Comm. Distance Ethernet: 100 m

Downloads

 

Datasheets

ADAM-6117PN Datasheet

  • 10~30 VDC
  • N/A
  • N/A
  • 8 differential ±150 mV ±500 mV ±1 V ±5 V ±10 V
  • N/A
  • 16-bit
  • 12 sample/second (total)
  • PROFINET
  • Ethernet: 10/100Mbps
  • Ethernet: 100 m
  • N/A

Digital I/O Modules

Power Supply
Digital Input
Digital Output
Peer-to-Peer
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input

16-ch Isolated Digital Input PROFINET Module


• PROFINET protocol
• 16-ch digital input
• Normal output current: 0.1 A (per channel)
• 2 x RJ-45 LAN (daisy chain)


Specifications

Display LED Indicators Status, Comm, Link, Speed
Power Supply Power Requirement 10~30 VDC
General Watchdog Timer System (1.6 second) & Communication (programmable)
Connector 2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 20~95 %RH
Temperature (Storage) -20~80 °C (-4~176 °F)
Interface 10/100Base-T(X)
Peer-to-Peer No
GCL No
Isolation Protection 2500 VDC
Communication Protocol PROFINET
Communication Speed Ethernet: 10/100Mbps
Comm. Distance Ethernet: 100 m
Digital Input Channles 16
Input Voltage Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC

Downloads

 

Datasheets

ADAM-6151PN Datasheet

  • 10~30 VDC
  • 16 Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
  • N/A
  • NO
  • 2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
  • PROFINET
  • Ethernet: 10/100Mbps
  • Ethernet: 100 m
  • N/A

Digital I/O Modules

Power Supply
Digital Input
Digital Output
Peer-to-Peer
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input

16-ch Isolated Digital Output PROFINET Module


• PROFINET protocol
• 16-ch digital output
• Normal output current: 0.1 A (per channel)
• 2 x RJ-45 LAN (daisy chain)

Specifications

Display LED Indicators Status, Comm, Link, Speed
Power Supply Power Requirement 10~30 VDC
General Watchdog Timer System (1.6 second) & Communication (programmable)
Connector 2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 20~95 %RH
Temperature (Storage) -20~80 °C (-4~176 °F)
Interface 10/100Base-T(X)
Peer-to-Peer No
GCL No
Isolation Protection 2500 VDC
Communication Protocol PROFINET
Communication Speed Ethernet: 10/100Mbps
Comm. Distance Ethernet: 100 m
Digital Output Channels 16 (Sink type) 8~35V, 100 mA per channel

Downloads

 

Datasheets

ADAM-6156PN Datasheet

  • 10~30 VDC
  • N/A
  • 16 (Sink type) 8~35V, 100 mA per channel
  • NO
  • 2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
  • PROFINET
  • Ethernet: 10/100Mbps
  • Ethernet: 100 m
  • N/A

Digital I/O Modules

Power Supply
Digital Input
Digital Output
Peer-to-Peer
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input

6-ch Relay PROFINET Module
• PROFINET protocol
• 16-ch digital outputPROFINET protocol
• Normal output current: 0.1 A (per channel)
• 2 x RJ-45 LAN (daisy chain)
• Contact Rating: 5 A @ 250 VAC; 5 A @ 30 VDC

Specifications

Display LED Indicators Status, Comm, Link, Speed
Power Supply Power Requirement 10~30 VDC
General Watchdog Timer System (1.6 second) & Communication (programmable)
Connector 2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 20~95 %RH
Temperature (Storage) -20~80 °C (-4~176 °F)
Interface 10/100Base-T(X)
Peer-to-Peer No
GCL No
Isolation Protection 2500 VDC
Communication Protocol PROFINET
Communication Speed Ethernet: 10/100Mbps
Comm. Distance Ethernet: 100 m
Digital Output Channels 5 Form C 1 Form A

Downloads

 

Datasheets

ADAM-6160PN Datasheet

  • 10~30 VDC
  • N/A
  • 5 Form C 1 Form A
  • NO
  • 2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
  • PROFINET
  • Ethernet: 10/100Mbps
  • Ethernet: 100 m
  • N/A

Analog I/O Modules

Power Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input

4-ch Isolated Analog Output PROFINET Module
• Channel: 4-ch AO
• Output Type: V, mA
• Voltage Range 5V, 10 V, ±5 V, ±10 V
• Current Range 0~20 mA, 4~20 mA
• Input type Dry Contact (Close to GND)

Specifications

Display LED Indicators Status, Comm, Link, Speed
Power Supply Power Requirement 10~30 VDC
Analog Output Channels 4
Voltage Range 0~5 V 0~10 V ±5 V ±10 V
Current Output 0~20 mA 4~20 mA
General Watchdog Timer System (1.6 second) & Communication (programmable)
Connector 2 x RJ-45 (LAN, Daisy Chain)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 20~95 %RH
Temperature (Storage) -20~80 °C (-4~176 °F)
Interface 10/100Base-T(X)
Peer-to-Peer No
GCL No
Isolation Protection 2500 VDC
Communication Protocol PROFINET
Communication Speed Ethernet: 10/100Mbps
Comm. Distance Ethernet: 100 m
Digital Input Channles 4
Input Voltage Dry contact only: Logic level 0: close to GND Logic level 1: open

Downloads

 

Datasheets

ADAM-6124PN Datasheet

  • 10~30 VDC
  • 4 Dry contact only: Logic level 0: close to GND Logic level 1: open
  • N/A
  • N/A
  • 4 0~5 V 0~10 V ±5 V ±10 V
  • 16-bit
  • 10 sample/secend(total)
  • PROFINET
  • Ethernet: 10/100Mbps
  • Ethernet: 100 m
  • N/A

Digital I/O Modules

Power Supply
Digital Input
Digital Output
Peer-to-Peer
Connector
Communication Protocol
Communication Speed
Communication Distance
Counter Input

15-ch Isolated Digital I/O PROFINET Module
• PROFINET protocol
• 8-ch digital input and 7-ch digital output (sink)
•  Normal output current: 0.1 A (per channel)
• 2 x RJ-45 LAN (daisy chain)

Specifications

Display LED Indicators Status, Comm, Link, Speed
Power Supply Power Requirement 10~30 VDC
General Watchdog Timer System (1.6 second) & Communication (programmable)
Connector 2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 20~95 %RH
Temperature (Storage) -20~80 °C (-4~176 °F)
Interface 10/100Base-T(X)
Peer-to-Peer No
GCL No
Isolation Protection 2500 VDC
Communication Protocol PROFINET
Communication Speed Ethernet: 10/100Mbps
Comm. Distance Ethernet: 100 m
Digital Input Channles 8
Input Voltage Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
Digital Output Channels 7 (Sink type) 8~35V, 100 mA per channel

Downloads

 

Datasheets

ADAM-6150PN Datasheet

  • 10~30 VDC
  • 8 Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
  • 7 (Sink type) 8~35V, 100 mA per channel
  • NO
  • 2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
  • PROFINET
  • Ethernet: 10/100Mbps
  • Ethernet: 100 m
  • N/A

Analog I/O Modules

Power Supply
Digital Input
Digital Output
Analog Input
Resolution
Analog Output
Sampling Rates
Communication Protocol
Counter Input
Outdoor Range
Topologies
Battery Input
Frequency Band
Modulation Type
Channels
RF Data Rate
Transmit Power

Wireless 6-ch Analog Input Node with Power Amplifier
• IEEE 802.15.4 Wireless Standard
• Supports Star/Tree/Mesh Network Topologies
• Modbus Communication Protocol
• LED Indicators

Specifications

Accuracy Voltage: +/-0.1% or better (Current) at 25°C, Current: +/-0.2% or better (Current) at 25°C
Channels 6 Non-Isolation (Differential)
CMR @ 50/60 Hz 100 dB
Common Mode Volts 10 VDC
Input Impedance >10 MΩ (Voltage), 120Ω (Current)
Input Max Voltage +/-15V
Input Type mV, V, mA
lnput Range ±150mV, ±500mV, ±1V, ±5V, ±10V, ±20mA, 0~20mA, 4~20 mA
NMR @ 50/60 Hz 65 dB
Protection 16-bit
Sampling Rates 12 sample/second (total)
Span Drift ±25 ppm/°C
Zero Drift ±6 µV/°C
Wireless Network Frequency Band ISM 2.4 GHz (2.4 GHz ~ 2.4835 GHz)
Function End Device
IEEE Standard 802.15.4
Outdoor Range 1000 m
Transmit Power 15 ± 1 dBm

Downloads

 

Datasheets

ADAM-2017PZ Datasheet

  • 10~30 VDC
  • N/A
  • N/A
  • 6 Non-Isolation (Differential) +/-15V
  • 16-bit
  • N/A
  • 12 sample/second (total)
  • Modbus
  • N/A
  • 1000 m
  • Star/Tree/Mesh
  • 2*AA Alkaline
  • ISM 2.4 GHz (2.4 GHz ~ 2.4835 GHz)
  • DSSS(OQPSK)
  • 6 Non-Isolation (Differential)
  • 250 Kbps
  • 3±1 dBm(ADAM-2017PZ)

Analog I/O Modules

Power Supply
Digital Input
Digital Output
Analog Input
Resolution
Analog Output
Sampling Rates
Communication Protocol
Counter Input
Outdoor Range
Topologies
Battery Input
Frequency Band
Modulation Type
Channels
RF Data Rate
Transmit Power

Wireless Temperature & Humidity Sensor Node
• 2.4 GHz IEEE 802.15.4 compliant RF
• Low duty cycle and low power consumption
• Outdoor range up to 110 m
• 2.4 GHz IEEE 802.15.4 compliant RF
• Built-in temperature / humidity sensor input

Specifications

Display LED Indicators Ext PWR, Error, Status, Level Index
Power Supply Power Requirement Power Input: Unregulated 10~30 VDC Battery Input: 2 x AA Alkaline 3 VDC
Analog Input Channels 1 Temperature Sensor 1 Humidity Sensor
Sampling Rates Respond Time: Temperature Sensor:±1 °C/min Humidity Sensor: 8 sec. (Achiving 63% of a step function)
Resolution Temperature Sensor: 0.02°C (0.04°F) Humidity Sensor: 0.15%RH
Span Drift Long term drift: Temperature Sensor: 0.04°C (0.07°F)/year Humidity Sensor: 0.5%RH/year
General Connector 1 x plug-in terminal block (#14~22 AWG)
Temperature (Operating) External power: -20~70 °C (-4~158 °F) Battery power: 0~50 °C (32~122 °F)
Humidity 20~95 %RH
Temperature (Storage) -40~85 °C (-40~184 °F)
Wireless Network IEEE Standard 802.15.4
Frequency Band ISM 2.4 GHz (2.4 GHz ~ 2.4835 GHz)
Channels 11 - 26
Topology Star / Tree / Mesh
Transmit Power 3±1 dBm
Outdoor Range 110 m
Modulation Type DSSS (OQPSK)
Receiver Sensitivity -97 dBm
RF Data Rate 250 kbps
Function End Device

Downloads

 

Datasheets

ADAM-2031Z Datasheet

  • 10~30 VDC
  • N/A
  • N/A
  • +/-15V
  • 16-bit
  • N/A
  • 12 sample/second (total)
  • Modbus
  • N/A
  • 110 m
  • Star / Tree / Mesh
  • 2 x AA Alkaline 3 VDC
  • ISM 2.4 GHz (2.4 GHz ~ 2.4835 GHz)
  • DSSS(OQPSK)
  • 6 Non-Isolation (Differential)
  • 250 Kbps
  • 3±1 dBm(ADAM-2031PZ)

Digital I/O Modules

Power Supply
Digital Input
Digital Output
Connector
Communication Protocol
Counter Input
Outdoor Range
Topologies
Battery Input
Frequency Band
Modulation Type
Channels
RF Data Rate
Transmit Power

Wireless 8-ch Digital Input Nodee
• 2.4 GHz IEEE 802.15.4 compliant RF
• Low duty cycle and low power consumption
• Outdoor range up to 110 m
• Supports battery input with 2 x AA alkaline batteries
• 10K Ω input resistance

Specifications

Display LED Indicators Ext PWR, Error, Status, Level Index
Power Supply Power Requirement Power Input: Unregulated 10~30 VDC Battery Input: 2 x AA Alkaline 3 VDC
General Connector 1 x plug-in terminal block (#14~22 AWG)
Temperature (Operating) External power: -20~70 °C (-4~158 °F) Battery power: 0~50 °C (32~122 °F)
Humidity 20~95 %RH
Temperature (Storage) -40~85 °C (-40~184 °F)
Digital Input Channles 8
Input Voltage Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~0.8 VDC max. Logic level 1: 2~5 VDC
Wireless Network IEEE Standard 802.15.4
Frequency Band ISM 2.4 GHz (2.4 GHz ~ 2.4835 GHz)
Channels 11 - 26
Topology Star / Tree / Mesh
Transmit Power 3±1 dBm
Outdoor Range 110 m
Modulation Type DSSS (OQPSK)
Receiver Sensitivity -97 dBm
RF Data Rate 250 kbps
Function End Device

Downloads

 

Datasheets

ADAM-2051Z Datasheet

  • 10~30 VDC
  • 8 Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~0.8 VDC max. Logic level 1: 2~5 VDC
  • N/A
  • 1*plug-in terminal block(#14~22AWG)
  • Modbus
  • N/A
  • 110 m
  • Star / Tree / Mesh
  • 2 x AA Alkaline 3 VDC
  • ISM 2.4 GHz (2.4 GHz ~ 2.4835 GHz)
  • DSSS(OQPSK)
  • 8
  • 250 Kbps
  • 3±1 dBm(ADAM-2051Z)

Digital I/O Modules

Power Supply
Digital Input
Digital Output
Connector
Communication Protocol
Counter Input
Outdoor Range
Topologies
Battery Input
Frequency Band
Modulation Type
Channels
RF Data Rate
Transmit Power

Wireless 8-ch Digital Input Node with Power Amplifier
• 2.4 GHz IEEE 802.15.4 compliant RF
• Low duty cycle and low power consumption
• With high RF output power
• Outdoor range up to 1,000 m
• Supports battery input with 2 x AA alkaline batteries

Specifications

Display LED Indicators Ext PWR, Error, Status, Level Index
Power Supply Power Requirement Power Input: Unregulated 10~30 VDC Battery Input: 2 x AA Alkaline 3 VDC
General Connector 1 x plug-in terminal block (#14~22 AWG)
Temperature (Operating) External power: -20~70 °C (-4~158 °F) Battery power: 0~50 °C (32~122 °F)
Humidity 20~95 %RH
Temperature (Storage) -40~85 °C (-40~184 °F)
Digital Input Channles 8
Input Voltage Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~0.8 VDC max. Logic level 1: 2~5 VDC
Wireless Network IEEE Standard 802.15.4
Frequency Band ISM 2.4 GHz (2.4 GHz ~ 2.4835 GHz)
Channels 11 - 26
Topology Star / Tree / Mesh
Transmit Power 19±1 dBm
Outdoor Range 1000 m
Modulation Type DSSS (OQPSK)
Receiver Sensitivity -97 dBm
RF Data Rate 250 kbps
Function End Device

Downloads

 

Datasheets

ADAM-2051PZ Datasheet

  • 10~30 VDC
  • 8 Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~0.8 VDC max. Logic level 1: 2~5 VDC
  • N/A
  • 1*plug-in terminal block(#14~22AWG)
  • Modbus
  • N/A
  • 1000 m
  • Star / Tree / Mesh
  • 2 x AA Alkaline 3 VDC
  • ISM 2.4 GHz (2.4 GHz ~ 2.4835 GHz)
  • DSSS(OQPSK)
  • 11 - 26
  • 250 Kbps
  • 19±1 dBm

Analog I/O Modules

Power Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input

1-ch Thermocouple Input Module

• Input type: Thermocouple, mV, V or mA
• Isolation voltage: 3000 VDC
• Watchdog Timer

Specifications

Analog input modules use a microprocessor-controlled integrating A/D converter to convert sensor voltage, current, thermocouple, or RTD signals into digital data. The digital data is then translated into either engineering units, twos complement hexadecimal format or percentage of full-scale range (FSR)according to the module ’s configuration. When prompted by the host computer, the data is sent through a standard RS-485 interface. The Analog Input Modules offer signal conditioning, A/D conversion, ranging, and RS-485 digital communication functions. They protect your equipment from ground loops and power surges by providing opto-isolation of the A/D input and transformer based isolation up to 3000 V DC . (ADAM-4011 has transformer-based isolation up to 500 V DC )

Downloads

Datasheets

ADAM-4011 Datasheet

  • 10~30 VDC
  • N/A
  • 2 Open collector to 30V, 30 mA max. load
  • ±15 mV, ±50 mV, ±100 mV,±500 mV, ±1 V,±2.5 V, ±20 mA J,R,K,S,T,B,E
  • N/A
  • 16-bit
  • 10 samples/second
  • ASCII command
  • Serial: From 1,200 to 115.2 k
  • Serial: 1.2 km
  • N/A

Analog I/O Modules

Power Supply
Digital Input
Digital Output
Analog Input
Analog Output
Resolution
Sampling Rates
Communication Protocol
Communication Speed
Communication Distance
Counter Input

8-ch Analog Input Module

• Channels: Six differential, two single-ended
• Input type: mV, V, mA
• Sampling rate: 10 samples/sec. (total)

Specifications

Display LED Indicators Power
Power Supply Power Requirement 10~30 VDC
Analog Input Channels 8 differential
Voltage Range ±150 mV ±500 mV ±1 V ±5 V ±10 V
Current Input ±20 mA
Sampling Rates 10 samples/second
Resolution 16-bit
Input Impedance Voltage: 20 MOhm
Span Drift ±25 ppm/°C
Zero Drift ±6 µV/°C
CMR @ 50/60 Hz 92 dB
General Watchdog Timer Yes
Connector 2 x plug-in terminal block (#14~22 AWG)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 5~95 %RH
Temperature (Storage) -25~85 °C (-13~185 °F)
Interface RS-485
Isolation Protection 3000 VDC
Communication Protocol ASCII command
Communication Speed Serial: From 1,200 to 115.2 k
Comm. Distance Serial: 1.2 km
Data Flow Control Yes

Downloads

 

Datasheets

ADAM-4017 Datasheet

  • 10~30 VDC
  • N/A
  • N/A
  • 8 differential ±150 mV ±500 mV ±1 V ±5 V ±10 V ±20 mA
  • N/A
  • 16-bit
  • 10 samples/second
  • ASCII command
  • Serial: From 1,200 to 115.2 k
  • Serial: 1.2 km
  • N/A

Copyright © Dadeh Pardazan Corporation 2013. All rights reserved.

dadehpardazan.ir
dadehpardazan.ir
dadehpardazan.ir