داده پردازان هوشمند ایلیا

AC Inverter Drives

Basic Solution

Basic Solution

Basic Solution Our solution is designed to be compact and complete to a whole range of simple applications like conveyors, fans and pumps with small power ratings up to 7,5kW. New features like built in EMC Filter & RS485 modbus have been added to make these basic solutions easier to install and integrate into today's systems.

مشاهده اطلاعات...

General Purpose

General Purpose

این گروه با محدوده گسترده تا توان 300 کیلو وات و با گشتاوری راه اندازی بسیار عالی برای کنترل هر نوع دستگاه مناسب هستند. امکانات بسیار زیاد نظیر انواع کارتهای شبکه، درجه حفاظت های گوناگون، نرم افزارهای اختصاصی و ورودی و خروجی های استاندارد و سفارشی این مدل ها را به یکی از محبوب ترین اینورترهای دنیا تبدیل نموده است.

مشاهده اطلاعات...

Lift Applications

Lift Applications

The YASKAWA L1000A is a special purpose lift inverter drive designed for 3 Million starts at 165% output current. It provides advanced control functions to run induction and PM motor applications in geared or gearless elevator systems.

مشاهده اطلاعات...

Textile

Textile

The T1000A is the high performance vector control AC Drive specially developed for textile applications. Special hardware and software features make this inverter drive specifically adapted to the needs of the textile industries.

مشاهده اطلاعات...

Pump & Fan Solution

Pump & Fan Solution

The E1000A is Best Solution for your HVAC, Pump & Fan applications!

مشاهده اطلاعات...

Interesting to know

شرکت Omron مدل دیگری از کنترل کننده های دما با قابلیت نصب بر روی ریل و ترمینال های قابل جدا شدن را ارائه نمود. ادامه مطلب...

Basic Solution

200V Single-Phase
200V Three-Phase
400V Three-Phase
Application
Control method
Torque features
Connectivity

The basic inverter

The new J1000 inverter has been designed to become the basic inverter in applications like conveyors, fans and pumps with small power ratings. It’s so easy to install, set-up, operate run but at same time covering all the needs for such a kinds of applications.
● V/F controlled inverter
● Good torque performance (150% / 3 Hz)
● Double rating ND 120%/1min and HD 150%/1 min
● Overload detection function (150% during 60s)
● Optional RS-232C/485 communication - Modbus
● Programming software: CX-drive for parameter configuration



Downloads

 

en fa Title

 

Documents

- YASKAWA AC Drive J1000, Compact V/f Control Drive, Quick Start Guide
- Installation Manual
- Technical Manual Manual
- Compact Inverter SERIES J1000
- Flyer Compact Inverter Drive J1000

  • 0.1kW to 1.5kW
  • 0.1kW to 4.0kW
  • 0.2kW to 4.0kW
  • Simple speed control
  • V/F control
  • 150% at 3 Hz
  • Memobus

Basic Solution

200V Single-Phase
200V Three-Phase
400V Three-Phase
Application
Control method
Torque features
Connectivity

Compact Vector Control Inverter Drive

YASKAWA V1000 is a general purpose inverter drive covering the demands of a wide field of applications including Open-Loop-Vector functionality and the usage of PM motor without feedback.

● High flux braking for 50% reduction of braking time
● Quick response on load and speed changes to improve machine performance
● Online Auto-Tuning to optimise for improved motor performance at low speed
● Open Loop Vector Control for PM motor operation
● Safe Disable Inputs for Safe Torque OFF




Downloads

en fa Title

 

Documents

- V1000 Quick-Start-Guide Manual
- YASKAWA AC Drive V1000, Compact Vector Control Drive, Technical Manual
- Brochure Inverter Series V1000
- Flyer Inverter Series V1000

  • 0.1kW to 4.0kW
  • 0.1kW to 15kW
  • 0.2kW to 15kW
  • High speed accuracy and high starting torque for compact general purpose
  • Open loop for Vector and Open and Speed feedback for V/F control
  • 150% at 0.6 Hz
  • Memobus, DeviceNet, Profibus, CANopen, CompoNet, LONworks

General Purpose

200V Single-Phase
200V Three-Phase
400V Three-Phase
Application
Control method
Torque features
Connectivity

Compact Vector Control Inverter Drive

YASKAWA V1000 is a general purpose inverter drive covering the demands of a wide field of applications including Open-Loop-Vector functionality and the usage of PM motor without feedback.

● High flux braking for 50% reduction of braking time
● Quick response on load and speed changes to improve machine performance
● Online Auto-Tuning to optimise for improved motor performance at low speed
● Open Loop Vector Control for PM motor operation
● Safe Disable Inputs for Safe Torque OFF




Downloads

en fa Title

 

Documents

- V1000 Quick-Start-Guide Manual
- YASKAWA AC Drive V1000, Compact Vector Control Drive, Technical Manual
- Brochure Inverter Series V1000
- Flyer Inverter Series V1000

  • 0.1kW to 4.0kW
  • 0.1kW to 15kW
  • 0.2kW to 15kW
  • High speed accuracy and high starting torque for compact general purpose
  • Open loop for Vector and Open and Speed feedback for V/F control
  • 150% at 0.6 Hz
  • Memobus, DeviceNet, Profibus, CANopen, CompoNet, LONworks

General Purpose

200V Single-Phase
200V Three-Phase
400V Three-Phase
Application
Control method
Torque features
Connectivity

The basic inverter

The new J1000 inverter has been designed to become the basic inverter in applications like conveyors, fans and pumps with small power ratings. It’s so easy to install, set-up, operate run but at same time covering all the needs for such a kinds of applications.
● V/F controlled inverter
● Good torque performance (150% / 3 Hz)
● Double rating ND 120%/1min and HD 150%/1 min
● Overload detection function (150% during 60s)
● Optional RS-232C/485 communication - Modbus
● Programming software: CX-drive for parameter configuration



Downloads

en fa Title

 

Documents

- YASKAWA AC Drive J1000, Compact V/f Control Drive, Quick Start Guide
- Installation Manual
- Technical Manual Manual
- Compact Inverter SERIES J1000
- Flyer Compact Inverter Drive J1000

  • N/A
  • 0.4 kW to 110 kW
  • 0.4 kW to 630 kW
  • High Performance Motor Control
  • Open and close loop for Vector and V/F control
  • 200% at 0.0Hz (CLV) 200% at 0.3Hz (OLV)
  • EtherCAT, EtherNet/IP, PROFINET, Modbus, DeviceNet, PROFIBUS, CANopen, MECHATROLINK-II

Lift Applications

200V Single-Phase
200V Three-Phase
400V Three-Phase
Application
Control method
Torque features
Connectivity

The basic inverter

The new J1000 inverter has been designed to become the basic inverter in applications like conveyors, fans and pumps with small power ratings. It’s so easy to install, set-up, operate run but at same time covering all the needs for such a kinds of applications.
● V/F controlled inverter
● Good torque performance (150% / 3 Hz)
● Double rating ND 120%/1min and HD 150%/1 min
● Overload detection function (150% during 60s)
● Optional RS-232C/485 communication - Modbus
● Programming software: CX-drive for parameter configuration



Downloads

en fa Title

 

Documents

- YASKAWA AC Drive J1000, Compact V/f Control Drive, Quick Start Guide
- Installation Manual
- Technical Manual Manual
- Compact Inverter SERIES J1000
- Flyer Compact Inverter Drive J1000

  • N/A
  • 4.0 kW to 45 kW
  • 4.0 kW to 75 kW
  • Lift control with asynchronous and synchronous motors
  • Open and close loop for Vector and V/F control
  • 200% at 0 Hz (CLV), 200% at 0.3 Hz (OLV)
  • RS-232C, RS-422/485(Memobus/Modbus), CANopen

Lift Applications

200V Single-Phase
200V Three-Phase
400V Three-Phase
Application
Control method
Torque features
Connectivity

The basic inverter

The new J1000 inverter has been designed to become the basic inverter in applications like conveyors, fans and pumps with small power ratings. It’s so easy to install, set-up, operate run but at same time covering all the needs for such a kinds of applications.
● V/F controlled inverter
● Good torque performance (150% / 3 Hz)
● Double rating ND 120%/1min and HD 150%/1 min
● Overload detection function (150% during 60s)
● Optional RS-232C/485 communication - Modbus
● Programming software: CX-drive for parameter configuration



Downloads

en fa Title

 

Documents

- YASKAWA AC Drive J1000, Compact V/f Control Drive, Quick Start Guide
- Installation Manual
- Technical Manual Manual
- Compact Inverter SERIES J1000
- Flyer Compact Inverter Drive J1000

  • N/A
  • 5.5 kW to 15 kW
  • 4.0 kW to 15 kW
  • Lift control with asynchronous and synchronous motors
  • V/f Control Open Loop Vector (OLV)
  • 200% at 0 Hz (CLV), 200% at 0.3 Hz (OLV)
  • RS-232C

Textile

200V Single-Phase
200V Three-Phase
400V Three-Phase
Application
Control method
Torque features
Connectivity

The basic inverter

The new J1000 inverter has been designed to become the basic inverter in applications like conveyors, fans and pumps with small power ratings. It’s so easy to install, set-up, operate run but at same time covering all the needs for such a kinds of applications.
● V/F controlled inverter
● Good torque performance (150% / 3 Hz)
● Double rating ND 120%/1min and HD 150%/1 min
● Overload detection function (150% during 60s)
● Optional RS-232C/485 communication - Modbus
● Programming software: CX-drive for parameter configuration



Downloads

en fa Title

 

Documents

- YASKAWA AC Drive J1000, Compact V/f Control Drive, Quick Start Guide
- Installation Manual
- Technical Manual Manual
- Compact Inverter SERIES J1000
- Flyer Compact Inverter Drive J1000

  • N/A
  • 0.55 kW to 110 kW
  • 0.55 kW to 185 kW
  • Lift control with asynchronous and synchronous motors
  • V/f Control,Open Loop Vector (OLV),Closed Loop Vector (CLV),Open Loop Vector (OLV) for PM,Adv. Open Loop Vector (OLV) for PM,Closed Loop Vector (CLV) for PM
  • Standard
  • RS-232C RS-422/485 (Memobus/Modbus)

Textile

200V Single-Phase
200V Three-Phase
400V Three-Phase
Application
Control method
Torque features
Connectivity

The basic inverter

The new J1000 inverter has been designed to become the basic inverter in applications like conveyors, fans and pumps with small power ratings. It’s so easy to install, set-up, operate run but at same time covering all the needs for such a kinds of applications.
● V/F controlled inverter
● Good torque performance (150% / 3 Hz)
● Double rating ND 120%/1min and HD 150%/1 min
● Overload detection function (150% during 60s)
● Optional RS-232C/485 communication - Modbus
● Programming software: CX-drive for parameter configuration



Downloads

en fa Title

 

Documents

- YASKAWA AC Drive J1000, Compact V/f Control Drive, Quick Start Guide
- Installation Manual
- Technical Manual Manual
- Compact Inverter SERIES J1000
- Flyer Compact Inverter Drive J1000

  • 0.1 kW to 3.0 kW
  • 0.55 kW to 18.5 kW
  • 0.2 kW to 18.5 kW
  • Lift control with asynchronous and synchronous motors
  • V/f Control,Open Loop Vector (OLV),Open Loop Vector (OLV) for PM
  • No
  • RS-232C RS-422/485 (Memobus/Modbus)

کپی رایت © شرکت داده پردازان 2013. همه حقوق محفوظ است.

dadehpardazan.ir
dadehpardazan.ir
dadehpardazan.ir