Warning: session_start(): Cannot send session cookie - headers already sent by (output started at /home/dadehpar/domains/dadehpardazan.ir/public_html/index.php:10) in /home/dadehpar/domains/dadehpardazan.ir/public_html/libraries/joomla/session/session.php on line 532

Warning: session_start(): Cannot send session cache limiter - headers already sent (output started at /home/dadehpar/domains/dadehpardazan.ir/public_html/index.php:10) in /home/dadehpar/domains/dadehpardazan.ir/public_html/libraries/joomla/session/session.php on line 532

Warning: Cannot modify header information - headers already sent by (output started at /home/dadehpar/domains/dadehpardazan.ir/public_html/index.php:10) in /home/dadehpar/domains/dadehpardazan.ir/public_html/libraries/joomfish/route/jfroute.php on line 544

Warning: Cannot modify header information - headers already sent by (output started at /home/dadehpar/domains/dadehpardazan.ir/public_html/index.php:10) in /home/dadehpar/domains/dadehpardazan.ir/public_html/libraries/joomfish/route/jfroute.php on line 545

Warning: Cannot modify header information - headers already sent by (output started at /home/dadehpar/domains/dadehpardazan.ir/public_html/index.php:10) in /home/dadehpar/domains/dadehpardazan.ir/public_html/libraries/joomfish/route/jfroute.php on line 546
 DadePardazan - Power Supply
DPHI Co.

Power Supply

Single Phase Power Supply

Single Phase Power Supply

a complete series of power supply units using switching, linear and filtered technology. In 1997 Cabur was the first to adopt primary switching for its power supply units instead of the conventional solution in which an electronic circuit is mounted on the transformer.
Our range of switching power supply units is marked by its reliability and versatility. The CSF series provides universal 90-264 VAC and 110-300 VDC input and top performance thus reducing energy consumption, dissipated energy and temperatures. It is a convenient and easy solution for a wide array of power supply requirements and problems.

View items...

1,2 or 3 Phase Power Supply

1,2 or 3 Phase Power Supply

a complete series of power supply units using switching, linear and filtered technology. In 1997 Cabur was the first to adopt primary switching for its power supply units instead of the conventional solution in which an electronic circuit is mounted on the transformer.
Our range of switching power supply units is marked by its reliability and versatility. The CSF series provides universal 90-264 VAC and 110-300 VDC input and top performance thus reducing energy consumption, dissipated energy and temperatures. It is a convenient and easy solution for a wide array of power supply requirements and problems.

View items...

Three Phase Power Supply

Three Phase Power Supply

a complete series of power supply units using switching, linear and filtered technology. In 1997 Cabur was the first to adopt primary switching for its power supply units instead of the conventional solution in which an electronic circuit is mounted on the transformer.
Our range of switching power supply units is marked by its reliability and versatility. The CSF series provides universal 90-264 VAC and 110-300 VDC input and top performance thus reducing energy consumption, dissipated energy and temperatures. It is a convenient and easy solution for a wide array of power supply requirements and problems.

View items...

DC/DC Insulated Coverters

DC/DC Insulated Coverters

a complete series of power supply units using switching, linear and filtered technology. In 1997 Cabur was the first to adopt primary switching for its power supply units instead of the conventional solution in which an electronic circuit is mounted on the transformer.
Our range of switching power supply units is marked by its reliability and versatility. The CSF series provides universal 90-264 VAC and 110-300 VDC input and top performance thus reducing energy consumption, dissipated energy and temperatures. It is a convenient and easy solution for a wide array of power supply requirements and problems.

View items...

Adjustable Linear Power Supply

Adjustable Linear Power Supply

a complete series of power supply units using switching, linear and filtered technology. In 1997 Cabur was the first to adopt primary switching for its power supply units instead of the conventional solution in which an electronic circuit is mounted on the transformer.
Our range of switching power supply units is marked by its reliability and versatility. The CSF series provides universal 90-264 VAC and 110-300 VDC input and top performance thus reducing energy consumption, dissipated energy and temperatures. It is a convenient and easy solution for a wide array of power supply requirements and problems.

View items...

Filtered Power supply

Filtered Power supply

a complete series of power supply units using switching, linear and filtered technology. In 1997 Cabur was the first to adopt primary switching for its power supply units instead of the conventional solution in which an electronic circuit is mounted on the transformer.
Our range of switching power supply units is marked by its reliability and versatility. The CSF series provides universal 90-264 VAC and 110-300 VDC input and top performance thus reducing energy consumption, dissipated energy and temperatures. It is a convenient and easy solution for a wide array of power supply requirements and problems.

View items...

Charging Accessory

Charging Accessory

a complete series of power supply units using switching, linear and filtered technology. In 1997 Cabur was the first to adopt primary switching for its power supply units instead of the conventional solution in which an electronic circuit is mounted on the transformer.
Our range of switching power supply units is marked by its reliability and versatility. The CSF series provides universal 90-264 VAC and 110-300 VDC input and top performance thus reducing energy consumption, dissipated energy and temperatures. It is a convenient and easy solution for a wide array of power supply requirements and problems.

View items...

Charging and Controling Accessory

Charging and Controling Accessory

a complete series of power supply units using switching, linear and filtered technology. In 1997 Cabur was the first to adopt primary switching for its power supply units instead of the conventional solution in which an electronic circuit is mounted on the transformer.
Our range of switching power supply units is marked by its reliability and versatility. The CSF series provides universal 90-264 VAC and 110-300 VDC input and top performance thus reducing energy consumption, dissipated energy and temperatures. It is a convenient and easy solution for a wide array of power supply requirements and problems.

View items...

Battries Holder

Battries Holder

a complete series of power supply units using switching, linear and filtered technology. In 1997 Cabur was the first to adopt primary switching for its power supply units instead of the conventional solution in which an electronic circuit is mounted on the transformer.
Our range of switching power supply units is marked by its reliability and versatility. The CSF series provides universal 90-264 VAC and 110-300 VDC input and top performance thus reducing energy consumption, dissipated energy and temperatures. It is a convenient and easy solution for a wide array of power supply requirements and problems.

View items...

Redandunt Accessory

Redandunt Accessory

a complete series of power supply units using switching, linear and filtered technology. In 1997 Cabur was the first to adopt primary switching for its power supply units instead of the conventional solution in which an electronic circuit is mounted on the transformer.
Our range of switching power supply units is marked by its reliability and versatility. The CSF series provides universal 90-264 VAC and 110-300 VDC input and top performance thus reducing energy consumption, dissipated energy and temperatures. It is a convenient and easy solution for a wide array of power supply requirements and problems.

View items...

Interesting to know

We have launched another attractive and multi-functional TC controller in DIN Rail format with removable socket. The E5DC with a single loop follows the outstanding control performance of the E5_C... Read more...

24 VDC

Input rated Voltage
Output rated voltage
Continues output current
Output power
Redanduncy
Special note
IP
Input Frequency
Input current at nominal Input
Inrush peak current
Power factor
Internal protection fuse
External protection on AC line
Output adjustable range
Overload limit
Short crcuit peak current
Load regulation
Output ripple at nominal ratings
Hold up time at In
Status display
Alarm contact threshold
Parallel connection
Redandunt parallel connection
Efficiency
Disipated power
Operating tempreture range
Input/output isolation
Input/ground isolation
Output/ground isolation
Standard/approvals
EMC Standards
MTBF
Overvoltage category/Pullution degree
Protection degree
Connection Terminal
Housing material
Approx. Weight
Mounting Information
Montong rail according to IEC60715/TH35-7.5
Montong rail according to IEC60715/G32

Single-phase switching power supply 120-230 Vac output power 15 W

• Single-phase input 90…264 Vac and DC 100…315 Vdc
• Short circuit, overload, over temperature, input overvoltage protections • Isolation Class 2, no grounding needed
• Compact dimensions
• Suitable for applications in SELV and PELV circuits







Specifications

Click on image to see in original size.

Accessories

 * Mounting rail type according to IEC60715/TH35-7.5:

 PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB

 

 

* PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB:

-

Downloads

en fa Title

 

Datasheets

- XCSD15C Datasheet

  • 120–230 Vac range 90…264 Vac / 100…315 Vdc)
  • 24 Vdc ± 1%
  • 0.6 A @ 50°C
  • 15 W
  • No
  • N/A
  • 20
  • 47...63 Hz
  • 0.3 A / 0.16 A ± 10%
  • < 5 A
  • > 0.6
  • T 1 A replaceable
  • circuit breaker: 2 A - C characteristic - fuse: T 2 A
  • -
  • 1.08 A
  • -
  • < 1%
  • ≤ 30 mVpp
  • >12 ms / >20 ms
  • “DC OK” green LED
  • -
  • possible
  • possible with external ORing diode
  • Uin 120 Vac : >85% Uin 230 Vac : >87%
  • Uin 120 Vac : 2,5 W Uin 230 Vac : 2,2 W
  • –20...+60°C, with derating over 50°C / over temperature protectio
  • 3 kVac / 60 s SELV output
  • class 2 without PE connection
  • class 2 without PE connection
  • EN50178, EN61558, EN60950, IEC950, UL508
  • EN61000-6-2, EN61000-6-4, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11
  • >750’000 h acc. to SN 29500 / >250’000 h acc. to MIL Std. HDBK 217F
  • II / 2
  • IP 20 IEC 529, EN60529
  • 2.5 mm2 fixed screw type
  • UL94V-0 plastic material
  • 130 g (5.12 oz)
  • vertical on rail, allow 10 mm spacing between adjacent components
  • PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB

12 VDC

Input rated Voltage
Output rated voltage
Continues output current
Output power
Redanduncy
Special note
IP
Input Frequency
Input current at nominal Input
Inrush peak current
Power factor
Internal protection fuse
External protection on AC line
Output adjustable range
Overload limit
Short crcuit peak current
Load regulation
Output ripple at nominal ratings
Hold up time at In
Status display
Alarm contact threshold
Parallel connection
Redandunt parallel connection
Efficiency
Disipated power
Operating tempreture range
Input/output isolation
Input/ground isolation
Output/ground isolation
Standard/approvals
EMC Standards
MTBF
Overvoltage category/Pullution degree
Protection degree
Connection Terminal
Housing material
Approx. Weight
Mounting Information
Montong rail according to IEC60715/TH35-7.5
Montong rail according to IEC60715/G32

Single-phase switching power supply 120-230 Vac output power 15 W

• Single-phase input 90…264 Vac and DC 100…315 Vdc
• Short circuit, overload, over temperature, input overvoltage protections • Isolation Class 2, no grounding needed
• Compact dimensions
• Suitable for applications in SELV and PELV circuits







Specifications

Click on image to see in original size.

Accessories

 * Mounting rail type according to IEC60715/TH35-7.5:

 PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB

 

 

* PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB:

-

Downloads

en fa Title

 

Datasheets

- XCSD15C Datasheet

  • 120–230 Vac range 90…264 Vac / 100…315 Vdc)
  • 12 Vdc ± 0.5 VDC
  • 1.2 A @ 50°C
  • 15 W
  • No
  • N/A
  • 20
  • 47...63 Hz
  • 0.3 A / 0.16 A ± 10%
  • < 5 A
  • > 0.6
  • T 1 A replaceable
  • circuit breaker: 2 A - C characteristic - fuse: T 2 A
  • -
  • 2.16 A
  • -
  • < 1%
  • ≤ 30 mVpp
  • >12 ms / >20 ms
  • “DC OK” green LED
  • -
  • possible
  • possible with external ORing diode
  • Uin 120 Vac : >85% Uin 230 Vac : >87%
  • Uin 120 Vac : 2,5 W Uin 230 Vac : 2,2 W
  • –20...+60°C, with derating over 50°C / over temperature protectio
  • 3 kVac / 60 s SELV output
  • class 2 without PE connection
  • class 2 without PE connection
  • EN50178, EN61558, EN60950, IEC950, UL508
  • EN61000-6-2, EN61000-6-4, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11
  • >750’000 h acc. to SN 29500 / >250’000 h acc. to MIL Std. HDBK 217F
  • II / 2
  • IP 20 IEC 529, EN60529
  • 2.5 mm2 fixed screw type
  • UL94V-0 plastic material
  • 130 g (5.12 oz)
  • vertical on rail, allow 10 mm spacing between adjacent components
  • PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB

24 VDC

Input rated Voltage
Output rated voltage
Continues output current
Output power
Redanduncy
Special note
IP
Input Frequency
Input current at nominal Input
Inrush peak current
Power factor
Internal protection fuse
External protection on AC line
Output adjustable range
Overload limit
Short crcuit peak current
Load regulation
Output ripple at nominal ratings
Hold up time at In
Status display
Alarm contact threshold
Parallel connection
Redandunt parallel connection
Efficiency
Disipated power
Operating tempreture range
Input/output isolation
Input/ground isolation
Output/ground isolation
Standard/approvals
EMC Standards
MTBF
Overvoltage category/Pullution degree
Protection degree
Connection Terminal
Housing material
Approx. Weight
Mounting Information
Montong rail according to IEC60715/TH35-7.5
Montong rail according to IEC60715/G32

Single-phase switching power supply 120-230 Vac output power 15 W

• Single-phase input 90…264 Vac and DC 100…315 Vdc
• Short circuit, overload, over temperature, input overvoltage protections • Isolation Class 2, no grounding needed
• Compact dimensions
• Suitable for applications in SELV and PELV circuits







Specifications

Click on image to see in original size.

Accessories

 * Mounting rail type according to IEC60715/TH35-7.5:

 PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB

 

 

* PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB:

-

Downloads

en fa Title

 

Datasheets

- XCSD15C Datasheet

  • 120–230 Vac range 90…264 Vac / 100…315 Vdc)
  • 24 Vdc ± 1%
  • 0.6 A @ 50°C
  • 15 W
  • No
  • N/A
  • 20
  • 47...63 Hz
  • 0.3 A / 0.16 A ± 10%
  • < 5 A
  • > 0.6
  • T 1 A replaceable
  • circuit breaker: 2 A - C characteristic - fuse: T 2 A
  • -
  • 1.08 A
  • -
  • < 1%
  • ≤ 30 mVpp
  • >12 ms / >20 ms
  • “DC OK” green LED
  • -
  • possible
  • possible with external ORing diode
  • Uin 120 Vac : >85% Uin 230 Vac : >87%
  • Uin 120 Vac : 2,5 W Uin 230 Vac : 2,2 W
  • –20...+60°C, with derating over 50°C / over temperature protectio
  • 3 kVac / 60 s SELV output
  • class 2 without PE connection
  • class 2 without PE connection
  • EN50178, EN61558, EN60950, IEC950, UL508
  • EN61000-6-2, EN61000-6-4, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11
  • >750’000 h acc. to SN 29500 / >250’000 h acc. to MIL Std. HDBK 217F
  • II / 2
  • IP 20 IEC 529, EN60529
  • 2.5 mm2 fixed screw type
  • UL94V-0 plastic material
  • 130 g (5.12 oz)
  • vertical on rail, allow 10 mm spacing between adjacent components
  • PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB

5~15 VDC

Input rated Voltage
Output rated voltage
Continues output current
Output power
Redanduncy
Special note
IP
Input Frequency
Input current at nominal Input
Inrush peak current
Power factor
Internal protection fuse
External protection on AC line
Output adjustable range
Overload limit
Short crcuit peak current
Load regulation
Output ripple at nominal ratings
Hold up time at In
Status display
Alarm contact threshold
Parallel connection
Redandunt parallel connection
Efficiency
Disipated power
Operating tempreture range
Input/output isolation
Input/ground isolation
Output/ground isolation
Standard/approvals
EMC Standards
MTBF
Overvoltage category/Pullution degree
Protection degree
Connection Terminal
Housing material
Approx. Weight
Mounting Information
Montong rail according to IEC60715/TH35-7.5
Montong rail according to IEC60715/G32

Single-phase switching power supply 120-230 Vac output power 15 W

• Single-phase input 90…264 Vac and DC 100…315 Vdc
• Short circuit, overload, over temperature, input overvoltage protections • Isolation Class 2, no grounding needed
• Compact dimensions
• Suitable for applications in SELV and PELV circuits







Specifications

Click on image to see in original size.

Accessories

 * Mounting rail type according to IEC60715/TH35-7.5:

 PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB

 

 

* PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB:

-

Downloads

en fa Title

 

Datasheets

- XCSD15C Datasheet

  • 120–230 Vac range 90…264 Vac / 100…315 Vdc)
  • 24 Vdc ± 1%
  • 0.6 A @ 50°C
  • 15 W
  • No
  • N/A
  • 20
  • 47...63 Hz
  • 0.3 A / 0.16 A ± 10%
  • < 5 A
  • > 0.6
  • T 1 A replaceable
  • circuit breaker: 2 A - C characteristic - fuse: T 2 A
  • -
  • 1.08 A
  • -
  • < 1%
  • ≤ 30 mVpp
  • >12 ms / >20 ms
  • “DC OK” green LED
  • -
  • possible
  • possible with external ORing diode
  • Uin 120 Vac : >85% Uin 230 Vac : >87%
  • Uin 120 Vac : 2,5 W Uin 230 Vac : 2,2 W
  • –20...+60°C, with derating over 50°C / over temperature protectio
  • 3 kVac / 60 s SELV output
  • class 2 without PE connection
  • class 2 without PE connection
  • EN50178, EN61558, EN60950, IEC950, UL508
  • EN61000-6-2, EN61000-6-4, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11
  • >750’000 h acc. to SN 29500 / >250’000 h acc. to MIL Std. HDBK 217F
  • II / 2
  • IP 20 IEC 529, EN60529
  • 2.5 mm2 fixed screw type
  • UL94V-0 plastic material
  • 130 g (5.12 oz)
  • vertical on rail, allow 10 mm spacing between adjacent components
  • PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB

+-12 ~ +-15 VDC

Input rated Voltage
Output rated voltage
Continues output current
Output power
Redanduncy
Special note
IP
Input Frequency
Input current at nominal Input
Inrush peak current
Power factor
Internal protection fuse
External protection on AC line
Output adjustable range
Overload limit
Short crcuit peak current
Load regulation
Output ripple at nominal ratings
Hold up time at In
Status display
Alarm contact threshold
Parallel connection
Redandunt parallel connection
Efficiency
Disipated power
Operating tempreture range
Input/output isolation
Input/ground isolation
Output/ground isolation
Standard/approvals
EMC Standards
MTBF
Overvoltage category/Pullution degree
Protection degree
Connection Terminal
Housing material
Approx. Weight
Mounting Information
Montong rail according to IEC60715/TH35-7.5
Montong rail according to IEC60715/G32

Single-phase switching power supply 120-230 Vac output power 15 W

• Single-phase input 90…264 Vac and DC 100…315 Vdc
• Short circuit, overload, over temperature, input overvoltage protections • Isolation Class 2, no grounding needed
• Compact dimensions
• Suitable for applications in SELV and PELV circuits







Specifications

Click on image to see in original size.

Accessories

 * Mounting rail type according to IEC60715/TH35-7.5:

 PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB

 

 

* PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB:

-

Downloads

en fa Title

 

Datasheets

- XCSD15C Datasheet

  • 120–230 Vac range 90…264 Vac / 100…315 Vdc)
  • 24 Vdc ± 1%
  • 0.6 A @ 50°C
  • 15 W
  • No
  • N/A
  • 20
  • 47...63 Hz
  • 0.3 A / 0.16 A ± 10%
  • < 5 A
  • > 0.6
  • T 1 A replaceable
  • circuit breaker: 2 A - C characteristic - fuse: T 2 A
  • -
  • 1.08 A
  • -
  • < 1%
  • ≤ 30 mVpp
  • >12 ms / >20 ms
  • “DC OK” green LED
  • -
  • possible
  • possible with external ORing diode
  • Uin 120 Vac : >85% Uin 230 Vac : >87%
  • Uin 120 Vac : 2,5 W Uin 230 Vac : 2,2 W
  • –20...+60°C, with derating over 50°C / over temperature protectio
  • 3 kVac / 60 s SELV output
  • class 2 without PE connection
  • class 2 without PE connection
  • EN50178, EN61558, EN60950, IEC950, UL508
  • EN61000-6-2, EN61000-6-4, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11
  • >750’000 h acc. to SN 29500 / >250’000 h acc. to MIL Std. HDBK 217F
  • II / 2
  • IP 20 IEC 529, EN60529
  • 2.5 mm2 fixed screw type
  • UL94V-0 plastic material
  • 130 g (5.12 oz)
  • vertical on rail, allow 10 mm spacing between adjacent components
  • PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB

12~15VDC

Input rated Voltage
Output rated voltage
Continues output current
Output power
Redanduncy
Special note
IP
Input Frequency
Input current at nominal Input
Inrush peak current
Power factor
Internal protection fuse
External protection on AC line
Output adjustable range
Overload limit
Short crcuit peak current
Load regulation
Output ripple at nominal ratings
Hold up time at In
Status display
Alarm contact threshold
Parallel connection
Redandunt parallel connection
Efficiency
Disipated power
Operating tempreture range
Input/output isolation
Input/ground isolation
Output/ground isolation
Standard/approvals
EMC Standards
MTBF
Overvoltage category/Pullution degree
Protection degree
Connection Terminal
Housing material
Approx. Weight
Mounting Information
Montong rail according to IEC60715/TH35-7.5
Montong rail according to IEC60715/G32

Single-phase switching power supply 120-230 Vac output power 15 W

• Single-phase input 90…264 Vac and DC 100…315 Vdc
• Short circuit, overload, over temperature, input overvoltage protections • Isolation Class 2, no grounding needed
• Compact dimensions
• Suitable for applications in SELV and PELV circuits







Specifications

Click on image to see in original size.

Accessories

 * Mounting rail type according to IEC60715/TH35-7.5:

 PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB

 

 

* PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB:

-

Downloads

en fa Title

 

Datasheets

- XCSD15C Datasheet

  • 120–230 Vac range 90…264 Vac / 100…315 Vdc)
  • 24 Vdc ± 1%
  • 0.6 A @ 50°C
  • 15 W
  • No
  • N/A
  • 20
  • 47...63 Hz
  • 0.3 A / 0.16 A ± 10%
  • < 5 A
  • > 0.6
  • T 1 A replaceable
  • circuit breaker: 2 A - C characteristic - fuse: T 2 A
  • -
  • 1.08 A
  • -
  • < 1%
  • ≤ 30 mVpp
  • >12 ms / >20 ms
  • “DC OK” green LED
  • -
  • possible
  • possible with external ORing diode
  • Uin 120 Vac : >85% Uin 230 Vac : >87%
  • Uin 120 Vac : 2,5 W Uin 230 Vac : 2,2 W
  • –20...+60°C, with derating over 50°C / over temperature protectio
  • 3 kVac / 60 s SELV output
  • class 2 without PE connection
  • class 2 without PE connection
  • EN50178, EN61558, EN60950, IEC950, UL508
  • EN61000-6-2, EN61000-6-4, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11
  • >750’000 h acc. to SN 29500 / >250’000 h acc. to MIL Std. HDBK 217F
  • II / 2
  • IP 20 IEC 529, EN60529
  • 2.5 mm2 fixed screw type
  • UL94V-0 plastic material
  • 130 g (5.12 oz)
  • vertical on rail, allow 10 mm spacing between adjacent components
  • PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB

24 VDC

Input rated Voltage
Output rated voltage
Continues output current
Output power
Redanduncy
Special note
IP
Input Frequency
Input current at nominal Input
Inrush peak current
Power factor
Internal protection fuse
External protection on AC line
Output adjustable range
Overload limit
Short crcuit peak current
Load regulation
Output ripple at nominal ratings
Hold up time at In
Status display
Alarm contact threshold
Parallel connection
Redandunt parallel connection
Efficiency
Disipated power
Operating tempreture range
Input/output isolation
Input/ground isolation
Output/ground isolation
Standard/approvals
EMC Standards
MTBF
Overvoltage category/Pullution degree
Protection degree
Connection Terminal
Housing material
Approx. Weight
Mounting Information
Montong rail according to IEC60715/TH35-7.5
Montong rail according to IEC60715/G32

Single-phase switching power supply 120-230 Vac output power 15 W

• Single-phase input 90…264 Vac and DC 100…315 Vdc
• Short circuit, overload, over temperature, input overvoltage protections • Isolation Class 2, no grounding needed
• Compact dimensions
• Suitable for applications in SELV and PELV circuits







Specifications

Click on image to see in original size.

Accessories

 * Mounting rail type according to IEC60715/TH35-7.5:

 PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB

 

 

* PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB:

-

Downloads

en fa Title

 

Datasheets

- XCSD15C Datasheet

  • 120–230 Vac range 90…264 Vac / 100…315 Vdc)
  • 24 Vdc ± 1%
  • 0.6 A @ 50°C
  • 15 W
  • No
  • N/A
  • 20
  • 47...63 Hz
  • 0.3 A / 0.16 A ± 10%
  • < 5 A
  • > 0.6
  • T 1 A replaceable
  • circuit breaker: 2 A - C characteristic - fuse: T 2 A
  • -
  • 1.08 A
  • -
  • < 1%
  • ≤ 30 mVpp
  • >12 ms / >20 ms
  • “DC OK” green LED
  • -
  • possible
  • possible with external ORing diode
  • Uin 120 Vac : >85% Uin 230 Vac : >87%
  • Uin 120 Vac : 2,5 W Uin 230 Vac : 2,2 W
  • –20...+60°C, with derating over 50°C / over temperature protectio
  • 3 kVac / 60 s SELV output
  • class 2 without PE connection
  • class 2 without PE connection
  • EN50178, EN61558, EN60950, IEC950, UL508
  • EN61000-6-2, EN61000-6-4, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11
  • >750’000 h acc. to SN 29500 / >250’000 h acc. to MIL Std. HDBK 217F
  • II / 2
  • IP 20 IEC 529, EN60529
  • 2.5 mm2 fixed screw type
  • UL94V-0 plastic material
  • 130 g (5.12 oz)
  • vertical on rail, allow 10 mm spacing between adjacent components
  • PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB

24 VDC

Input rated Voltage
Output rated voltage
Continues output current
Output power
Redanduncy
Special note
IP
Input Frequency
Input current at nominal Input
Inrush peak current
Power factor
Internal protection fuse
External protection on AC line
Output adjustable range
Overload limit
Short crcuit peak current
Load regulation
Output ripple at nominal ratings
Hold up time at In
Status display
Alarm contact threshold
Parallel connection
Redandunt parallel connection
Efficiency
Disipated power
Operating tempreture range
Input/output isolation
Input/ground isolation
Output/ground isolation
Standard/approvals
EMC Standards
MTBF
Overvoltage category/Pullution degree
Protection degree
Connection Terminal
Housing material
Approx. Weight
Mounting Information
Montong rail according to IEC60715/TH35-7.5
Montong rail according to IEC60715/G32

Single-phase switching power supply 120-230 Vac output power 15 W

• Single-phase input 90…264 Vac and DC 100…315 Vdc
• Short circuit, overload, over temperature, input overvoltage protections • Isolation Class 2, no grounding needed
• Compact dimensions
• Suitable for applications in SELV and PELV circuits







Specifications

Click on image to see in original size.

Accessories

 * Mounting rail type according to IEC60715/TH35-7.5:

 PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB

 

 

* PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB:

-

Downloads

en fa Title

 

Datasheets

- XCSD15C Datasheet

  • 120–230 Vac range 90…264 Vac / 100…315 Vdc)
  • 24 Vdc ± 1%
  • 0.6 A @ 50°C
  • 15 W
  • No
  • N/A
  • 20
  • 47...63 Hz
  • 0.3 A / 0.16 A ± 10%
  • < 5 A
  • > 0.6
  • T 1 A replaceable
  • circuit breaker: 2 A - C characteristic - fuse: T 2 A
  • -
  • 1.08 A
  • -
  • < 1%
  • ≤ 30 mVpp
  • >12 ms / >20 ms
  • “DC OK” green LED
  • -
  • possible
  • possible with external ORing diode
  • Uin 120 Vac : >85% Uin 230 Vac : >87%
  • Uin 120 Vac : 2,5 W Uin 230 Vac : 2,2 W
  • –20...+60°C, with derating over 50°C / over temperature protectio
  • 3 kVac / 60 s SELV output
  • class 2 without PE connection
  • class 2 without PE connection
  • EN50178, EN61558, EN60950, IEC950, UL508
  • EN61000-6-2, EN61000-6-4, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11
  • >750’000 h acc. to SN 29500 / >250’000 h acc. to MIL Std. HDBK 217F
  • II / 2
  • IP 20 IEC 529, EN60529
  • 2.5 mm2 fixed screw type
  • UL94V-0 plastic material
  • 130 g (5.12 oz)
  • vertical on rail, allow 10 mm spacing between adjacent components
  • PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB

10~15VDC

Input rated Voltage
Output rated voltage
Continues output current
Output power
Redanduncy
Special note
IP
Input Frequency
Input current at nominal Input
Inrush peak current
Power factor
Internal protection fuse
External protection on AC line
Output adjustable range
Overload limit
Short crcuit peak current
Load regulation
Output ripple at nominal ratings
Hold up time at In
Status display
Alarm contact threshold
Parallel connection
Redandunt parallel connection
Efficiency
Disipated power
Operating tempreture range
Input/output isolation
Input/ground isolation
Output/ground isolation
Standard/approvals
EMC Standards
MTBF
Overvoltage category/Pullution degree
Protection degree
Connection Terminal
Housing material
Approx. Weight
Mounting Information
Montong rail according to IEC60715/TH35-7.5
Montong rail according to IEC60715/G32

Single-phase switching power supply 120-230 Vac output power 15 W

• Single-phase input 90…264 Vac and DC 100…315 Vdc
• Short circuit, overload, over temperature, input overvoltage protections • Isolation Class 2, no grounding needed
• Compact dimensions
• Suitable for applications in SELV and PELV circuits







Specifications

Click on image to see in original size.

Accessories

 * Mounting rail type according to IEC60715/TH35-7.5:

 PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB

 

 

* PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB:

-

Downloads

en fa Title

 

Datasheets

- XCSD15C Datasheet

  • 120–230 Vac range 90…264 Vac / 100…315 Vdc)
  • 24 Vdc ± 1%
  • 0.6 A @ 50°C
  • 15 W
  • No
  • N/A
  • 20
  • 47...63 Hz
  • 0.3 A / 0.16 A ± 10%
  • < 5 A
  • > 0.6
  • T 1 A replaceable
  • circuit breaker: 2 A - C characteristic - fuse: T 2 A
  • -
  • 1.08 A
  • -
  • < 1%
  • ≤ 30 mVpp
  • >12 ms / >20 ms
  • “DC OK” green LED
  • -
  • possible
  • possible with external ORing diode
  • Uin 120 Vac : >85% Uin 230 Vac : >87%
  • Uin 120 Vac : 2,5 W Uin 230 Vac : 2,2 W
  • –20...+60°C, with derating over 50°C / over temperature protectio
  • 3 kVac / 60 s SELV output
  • class 2 without PE connection
  • class 2 without PE connection
  • EN50178, EN61558, EN60950, IEC950, UL508
  • EN61000-6-2, EN61000-6-4, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11
  • >750’000 h acc. to SN 29500 / >250’000 h acc. to MIL Std. HDBK 217F
  • II / 2
  • IP 20 IEC 529, EN60529
  • 2.5 mm2 fixed screw type
  • UL94V-0 plastic material
  • 130 g (5.12 oz)
  • vertical on rail, allow 10 mm spacing between adjacent components
  • PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB

+-12 ~ +-15 VDC

Input rated Voltage
Output rated voltage
Continues output current
Output power
Redanduncy
Special note
IP
Input Frequency
Input current at nominal Input
Inrush peak current
Power factor
Internal protection fuse
External protection on AC line
Output adjustable range
Overload limit
Short crcuit peak current
Load regulation
Output ripple at nominal ratings
Hold up time at In
Status display
Alarm contact threshold
Parallel connection
Redandunt parallel connection
Efficiency
Disipated power
Operating tempreture range
Input/output isolation
Input/ground isolation
Output/ground isolation
Standard/approvals
EMC Standards
MTBF
Overvoltage category/Pullution degree
Protection degree
Connection Terminal
Housing material
Approx. Weight
Mounting Information
Montong rail according to IEC60715/TH35-7.5
Montong rail according to IEC60715/G32

Single-phase switching power supply 120-230 Vac output power 15 W

• Single-phase input 90…264 Vac and DC 100…315 Vdc
• Short circuit, overload, over temperature, input overvoltage protections • Isolation Class 2, no grounding needed
• Compact dimensions
• Suitable for applications in SELV and PELV circuits







Specifications

Click on image to see in original size.

Accessories

 * Mounting rail type according to IEC60715/TH35-7.5:

 PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB

 

 

* PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB:

-

Downloads

en fa Title

 

Datasheets

- XCSD15C Datasheet

  • 120–230 Vac range 90…264 Vac / 100…315 Vdc)
  • 24 Vdc ± 1%
  • 0.6 A @ 50°C
  • 15 W
  • No
  • N/A
  • 20
  • 47...63 Hz
  • 0.3 A / 0.16 A ± 10%
  • < 5 A
  • > 0.6
  • T 1 A replaceable
  • circuit breaker: 2 A - C characteristic - fuse: T 2 A
  • -
  • 1.08 A
  • -
  • < 1%
  • ≤ 30 mVpp
  • >12 ms / >20 ms
  • “DC OK” green LED
  • -
  • possible
  • possible with external ORing diode
  • Uin 120 Vac : >85% Uin 230 Vac : >87%
  • Uin 120 Vac : 2,5 W Uin 230 Vac : 2,2 W
  • –20...+60°C, with derating over 50°C / over temperature protectio
  • 3 kVac / 60 s SELV output
  • class 2 without PE connection
  • class 2 without PE connection
  • EN50178, EN61558, EN60950, IEC950, UL508
  • EN61000-6-2, EN61000-6-4, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11
  • >750’000 h acc. to SN 29500 / >250’000 h acc. to MIL Std. HDBK 217F
  • II / 2
  • IP 20 IEC 529, EN60529
  • 2.5 mm2 fixed screw type
  • UL94V-0 plastic material
  • 130 g (5.12 oz)
  • vertical on rail, allow 10 mm spacing between adjacent components
  • PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB

24 VDC

Input rated Voltage
Output rated voltage
Continues output current
Output power
Redanduncy
Special note
IP
Input Frequency
Input current at nominal Input
Inrush peak current
Power factor
Internal protection fuse
External protection on AC line
Output adjustable range
Overload limit
Short crcuit peak current
Load regulation
Output ripple at nominal ratings
Hold up time at In
Status display
Alarm contact threshold
Parallel connection
Redandunt parallel connection
Efficiency
Disipated power
Operating tempreture range
Input/output isolation
Input/ground isolation
Output/ground isolation
Standard/approvals
EMC Standards
MTBF
Overvoltage category/Pullution degree
Protection degree
Connection Terminal
Housing material
Approx. Weight
Mounting Information
Montong rail according to IEC60715/TH35-7.5
Montong rail according to IEC60715/G32

Single-phase switching power supply 120-230 Vac output power 15 W

• Single-phase input 90…264 Vac and DC 100…315 Vdc
• Short circuit, overload, over temperature, input overvoltage protections • Isolation Class 2, no grounding needed
• Compact dimensions
• Suitable for applications in SELV and PELV circuits







Specifications

Click on image to see in original size.

Accessories

 * Mounting rail type according to IEC60715/TH35-7.5:

 PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB

 

 

* PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB:

-

Downloads

en fa Title

 

Datasheets

- XCSD15C Datasheet

  • 120–230 Vac range 90…264 Vac / 100…315 Vdc)
  • 24 Vdc ± 1%
  • 0.6 A @ 50°C
  • 15 W
  • No
  • N/A
  • 20
  • 47...63 Hz
  • 0.3 A / 0.16 A ± 10%
  • < 5 A
  • > 0.6
  • T 1 A replaceable
  • circuit breaker: 2 A - C characteristic - fuse: T 2 A
  • -
  • 1.08 A
  • -
  • < 1%
  • ≤ 30 mVpp
  • >12 ms / >20 ms
  • “DC OK” green LED
  • -
  • possible
  • possible with external ORing diode
  • Uin 120 Vac : >85% Uin 230 Vac : >87%
  • Uin 120 Vac : 2,5 W Uin 230 Vac : 2,2 W
  • –20...+60°C, with derating over 50°C / over temperature protectio
  • 3 kVac / 60 s SELV output
  • class 2 without PE connection
  • class 2 without PE connection
  • EN50178, EN61558, EN60950, IEC950, UL508
  • EN61000-6-2, EN61000-6-4, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11
  • >750’000 h acc. to SN 29500 / >250’000 h acc. to MIL Std. HDBK 217F
  • II / 2
  • IP 20 IEC 529, EN60529
  • 2.5 mm2 fixed screw type
  • UL94V-0 plastic material
  • 130 g (5.12 oz)
  • vertical on rail, allow 10 mm spacing between adjacent components
  • PR/3/AC, PR/3/AC/ZB, PR/3/AS, PR/3/AS/ZB

Copyright © Dadeh Pardazan Corporation 2013. All rights reserved.

dadehpardazan.ir
dadehpardazan.ir
dadehpardazan.ir